SINOPUREN OL260 PRO User manual

for Laminator
Models OL260 PRO / OL360 PRO
[email protected]
www.sinopuren.com
86 - 755 - 2832 1289
User Manual
Contace customer service at
[email protected]
Please be assured that we offer our
warranty and qtechnical support.
Do not return this product
to place of purchase.

Contents
Welcome / Registrtion Guide......................1
Know Your Laminator......................2
Specifications......................3
Laminating Guide......................4
Attention......................5
Warnning......................6
Trouble Shooting Guide......................7
3 - Year Limited Warranty......................8

1
Thank you for choosing
to buy a Sinopuren machine
After registering your free 36 months warranty,
your Sinopuren machine will be covered for
parts and labor for 36 months from the date
of purchase, subject to the terms of the
warranty. If you have any questions about
your Sinopuren machine, call the Sinopuren
Helpline with your serial number and details
of where/ when you bought the machine.
Most questions can be solved over the phone
or emial by one of our trained Sinopuren
Helpline staff.
Your serial number can be found on your rating
plate which is on the base of the machine.
Alternatively, visit www.sinopuren.com/support for
online help, general tips and useful information
about Sinopuren.
Sinopuren customer care
NOTE: Normal Warranty is 12 months, but now,
you can UP TO 3 YEARS Warranty.
JUST need to REGISTER your products, and done
within 1 months after you purchased.
Easy to register your free 3 years warranty
Email
Send Serial and Order ID number to:
[email protected]
For Household Use Only
SAVE THESE INSTRUCTIONS
This illustration is for example purposes only.
Note your serial number for future reference.
Serial Number:
Serial Number:
Order ID:
Also, If you get any questions for your item
or want to get After Sales Service just send
email to us, we will reply within 24hs.
Please do not return this product to
place of purchase, that was not
neccessary.
Please be assured that we offer our warranty
and technical support.

Know Your Laminator
Puncher Entrance
Anti-blocking slider
(for clearing jams)
Laminator Pouch Exit
Power Cord
Indicator elements
(LEDs)
Power and Pouch
Thickness Adjustment
OL260 PRO
2

Specifications
Features
Protection and refinement of your documents. Laminate photos, documents, graphics,
ID cards etc. up to A4/A3 size. The device operates using 2 heating rollers, has a quick
warm-up phase and laminates without a carrier.
LEDs indicate the operating status
Automatic switch-off in the event of overheating
High quality heating system prevents smudging and blistering
Warm-up phase, approx. 5 minutes
Cool down phase to room temperature, approx. 30 minutes.
Foil thickness, minimum 3 mil and maximal 7 mil
OL260 PRO
Laminating system:
Maximum foil thickness:
Hot roller technology
3 - 7 mil
Laminating speed: 300 mm/min
Power supply: 120 Volt, 60 Hz
Working width: 230 mm (A4)
Power consumption: 265 W
Dimensions (LxWxH): 340 x 159 x 70 mm
Weight: Approx. 1.25 kg
330 mm (A3)
365 W
434 x 159 x 70 mm
Approx. 1.6 kg
OL360 PRO
3

Laminating Guide
thickness switch
GOOD
NOT GOOD
ON/OFF switch
Hot Lamination
Connect the power cable to an easily accessible, properly
installed power socket.
Switch on the On/Off switch on the right-hand side of the
unit (I). The "COLD" LED lights up and the drive motor for the
transport rollers starts up.
Press the foil thickness switch on the device until the LED
(3mil, 5mil or 7mil) corresponding to the foil pocket
thickness to be used flashes.
The correct operating temperature is reached after about
5 minutes or as soon as the foil thickness indicator LED lights
up continuously.
Insert the document to be laminated in the foil pocket so
that there is a margin of approx. 3 - 5 mm to the edge of
the foil on all sides.
Attention: Only use hot laminating foils.
Insert the foil pocket containing the document in the
insertion slot on the rear of the laminator. Insert the ready
closed side of the foil pocket first.
Attention: The foil is very hot and soft when ejected following
lamination. Therefore, handle the laminated product with
extreme care.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Cold Lamination
Connect the power cable to an easily accessible, properly
installed power socket.
Switch on the On/Off switch on the right-hand side of the
unit (I).
The "COLD" LED lights up and the drive motor for the
transport rollers start up.
Remove the protective foil from the foil pocket.
Insert the document to be laminated in the foil pocket so
that there is a margin of approx. 3 - 5 mm to the edge of the
foil on all sides.
Insert the foil pocket containing the document in the insertion
slot on the rear of the laminator. Insert the ready closed side
of the foil pocket first.
4

Attention things
Important Safety Instructions
Attention: Check that the voltage specifications of the
machine correspond to that of your power supply
network (120 V, 60 Hz).
Note: To prevent the laminating foil from creasing,
never feed the open side of the foil pocket first in the
insertion slot of the laminator. The laminating process
occurs automatically.
Note: To flatten the laminated product, place a book
or similar heavy, flat object,on it.
Attention: If you have just finished using the laminator for
hot laminating, you must let the laminator cool down.
The cool down phase can take up to 30 minutes.
120V
30 minutes
5

6
Warnning
Important Safety Instructions
NO PAPER CLIPS
KEEP AWAY FROM CHILREN
NEVER OPEN THE UNIT
Carefully read this operation manual before
operating the unit.
Never attempt to open and service the unit. There
are no user serviceable parts inside the laminator.
Repairs must be done by authorized personnel.
Unauthorized servicing of the unit will render the
warranty invalid.
Use only the pouches with the right thickness and
size. Pouches that are too thin will easily be caught
and result in documnet jams.
Never laminate heat sensitive material such as
thermal fax paper.
Machine surface is hot during operation. Children
operating the machine must be supervised by adults.
Never laminate over stanples or paper clips.
1.
2.
3.
4.
5.
6.
7.
1. Do not use empty
film to laminate
2. Feed pouches from
the front, closed
end first
3. Pay attention to the
position of alignment
parallel placement
not put crooked
4.Please choose the
right size of pouches
5.Do not connect
the pouches to
use
6.Do not cut open the
pouches to use
7.Do not use the
deformed pouches
8.No oversized photos

Trouble Shooting Guide
Troubleshooting
Fault Corrective measures
LED does not light up
Device does not respond
Check that the power cable has been correctly
plugged into the power socket and that the
On/Off switch is switched to I.
If the fault cannot be cleared,please contact
the sales outlet where you purchased the device.
Foil jam Check the foil pockets being used are the
correct size.
Only use foil pockets of the sizes prescribed.
Ensure that the foil pocket has been inserted
correctly in the unit.
To clear the fault, follow the instructions in the
Section "Clearing Foil Jams".
Laminated foil is not
completel transparent
Laminate the same foil again to improve the
lamination result.
Conformity of the equipment to the
EU directives is confirmed by the
CE symbol.
Disposal
This symbol (crossed out waste bin) indicates that the product must be
returned to an authorised recycling centre or collection point when it
has reached the end of its service life. The symbol only applies to states
within the EEA. EEA = European Economic Area, which is comprised of
the member states of the EU plus Norway, Island and Liechtenstein.
7

3 - Year Limited Warranty
After registered your item(s), Sinopuren Inc. warrants that for a period of 3 years from the date
of purchase, this product will be free from defects in material and workmanship. at its option,
will repair or replace this product or any component of the product found to be defective
during the warranty period. Replacement will be made with a new or remanufactured
product or component. If the product is no longer available, replacement may be made
with a similar product of equal or greater value. This is your exclusive warranty. Do NOT
attempt to repair or adjust any electrical or mechanical functions on this product. Doing so
will void this warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and
is nottransferable. Keep the original sales receipt. Proof of purchase is required to obtain
warranty performance. Sinopuren dealers, service centers, or retail stores selling Sinopuren
products do not have the right to alter, modify or any way change the terms and conditions
of this warranty.This warranty does not cover normal wear of parts or damage resulting from
any of the following: negligentuse or misuse of the product, use on improper voltage or
current, use contrary to the operating instructions,disassembly, repair or alteration by anyone
other than Sinopuren or an authorized Sinopuren service center. Further, the warranty does
not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above
limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from
province to province, state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
All countries
If you have any question regarding this warranty or would like to obtain warranty service,
please send email to [email protected] and our service dept. will be reply you in 24h.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF
PURCHASE
8

Design and Technology
© 2021 Sinopuren Brands, All rights reserved.
Sinopuren, the Sinopuren logo is trademarks of
Sinopuren Inc Registered in the U.S and other
countries. Printed in China.
Sinopuren Inc.
Design by Sinopuren in HK, Assembled in China
Hongkong Office: Unit 2401A 24/F Park-in Comm CTR 56 Dundas ST Mongkok KL Hongkong
Manufacturer: Guangdong willing Technology Corporation
Address: Willing Industrial Park Dongjiang Industrial District Shuikou Town, Huizhou, China
Scan QR Droid
to contact us.
Sinopuren Helpline:
86-755-2832 1289
Email: [email protected]