Gladwork LM401 User manual

1
A4 Laminator
Instruction Manual
Model: LM401
Read this manual carefully before use. Keep it in safe for reference in need.
Thank you for buying this high-performance laminator! This laminator
features a slime and compact design. It accepts pouches ranging from cold
film to 5 mil thermal laminating pouch,with size from name card to letter
size. Now, get familiar with your device now.
PRODUCT DESCRIPTION
SPECIFICATION
Voltage:
100-120V/60Hz
Current:
3.2A
Ready time:
5~6 minutes
Entry width:
9 inches
Thickness:
0.6 mm
Pouch:
Cold/ 3mil/5mil
speed:
250mm/Min
Rollers:
2
Size:
390 x 145 x 98 mm
N.W.:
1.0 Kg
Entry
LED
Switch Button
Jam Release Button

2
UTILITY
It laminates both cold and hot pouches from name card size to letter
size. It provides best lamination for hot pouches up to letter size in 3
mil or 5mil thickness. To get a better lamination performance, the
suitable room temperature is 18℃~25℃(namely 65℉~77℉).
OPERATION
POWER ON and OFF
Connect the plug to mains power, press switch button to turn on the machine.
The Power LED would turn into Red. If you press switch button to "Cold"
position, the machine is under cold lamination status. If you press switch to
"Hot" position , the machine is under hot lamination status.
To turn off this laminator, press switch button back to "Off" position, power
will be cut off and laminator is shut off.
COLD LAMINATION
Please make sure the machine is cool when you use cold lamination. Do not
use cold lamination if you just finish the job of hot lamination. When Ready
LED turns on in green, put the paper into cold pouch, and insert the pouch
into laminator through Lamination Entry.
HOT LAMINATION
If you press the switch button to "Hot" position, you would have to wait for
about 5~6 minutes until the Green Ready LED turns on , and then put the
paper into 3mil or 5mil pouch, and insert the pouch into laminator through
laminator’s entry throat.
Note:
1. In order to get better lamination performance, please wait for extra 2
minutes after “Ready LED” lights up.
2. To get a flat lamination performance, we sincerely advise you to use a
thickness book to flatten the end edge of the pouch.
3. To get a better performance of laminating 5 mil pouches, please do not
laminate more than 10 sheets all at a time. Please wait for extra 2~3 minutes
after you laminate 10 sheets of 5mil pouches every time.
CLEAR THE JAMMED POUCH
When a mis-feed or jam occurs, press down "Jam Release " button and pull
out the jammed pouch..
MAINTENANCE AND WARNING
1. To clean or move around, make sure that this laminator is turned off.
2. Do not laminate dirty pouches, clean it before lamination.
3. Do not use this laminator in damp conditions.
4. Do not laminate anything that is more than 0.6mm thickness for best seal.
5. Do not laminate heat sensitive paper.
6. This laminator should only use power 100-120V/60Hz and be used
indoors only.
7. NEVER OPEN THIS LAMINATOR WHILE IN USE.
WARRANTY
This product comes with one year limited warranty. Please return the
laminator with the original package and manual within 14 days if you
dislike it.