Sinotec SBS-688LS User manual

.
2 1CH SOUNDBAR SYSTEM
SBS-688LS

12
12
2.Important Safety Instructions............................................... 4
9.

to direct heat, rain
used to disconnect the device, the disconnected device
should remain readily operable.
for the replacement of the
receptacles or at the point
way, for example, when the power-supply
cord
Use the unit only
from it toppling over.
splashing, no objects
should be
used to disconnect the device, the disconnected device
should remain readily operable. In order
is replaced incorrectly

SBS-688LS
3.5mmAUXcablex1
 
AC 110V-240V 50Hz/60Hz
 
ForSouthAfrica,itonlyworksunder
230V 50Hz.
Power Consumption
66H*75D*860L mm(Soundbar)
Name 2.1CH Soundbar System
96W
115W*420H*250Dmm (Subwoofer)
4.5
STOP
PLAY/PAUSE
NEXT
PREV
place the unit.

USB AUX SW OUT
USB AU X SW OUT
SW output
5
STOP
PLAY/PAUSE
NEXT
PREV
(Only work under USB mode)
6. Stand by: Press and
hold in 3-5 seconds
Input: Press in short
9. Bluetooth Pair/Play/Pause
Bluetooth pair: Under BT mode, extended
Play/pause: only work under BT/USB mode
till BT
press in 3-5 seconds disconnected

Green
SBS-688LS
cyan
battery slot
SBS-688LS
battery
4
Plug the power cord in and the LED will light up.
select the mode
Plug the power cable in and wait for the LED to light up in red.
BT BT
BT
BT
BT BT
BT
Press the INPUT button to select the AUX mode, hold it until the LED
lights up green.

Insert the USB drive.
Press and hold the
Unit not
responding
Volume
issues
Pairing
issues
Remote
problematic
try to select different
Turn the appliance off
then turn it on again.
manual on how to
adjust the volume.
manual on how to
pair devices.
may be depleted. Try
with a slightly dam
have questions