Sinotec SBS-880 User manual

MODENEXTPREV
EQ
PLAY/PAUSESTANDBY USB
5V ---500mA
Speaker:4cell; Subwoofer:1cell
Speaker:4; Subwoofer:4
Speaker:15;Subwoofer:30
15W+15W(4Ω 、1KHz、0.7%THD)
30W(4Ω 、100Hz、0.7%THD)
50W
3.5A
Please move this to bel ow placement
SBS-880

OPTICAL
1.
2.POWER
3.MODE
4.VOL-
5.3D
6.EQ
7.BASS-
8.REPEAT
9.MUTE
10.PREV
11.NEXT
12.VOL+
13..BASS+
14.TREBLE+
15.TREBLE-
PLAY/PAUSE
MODENEXTPREV
EQ
PLAY/PAUSESTANDBY USB
5V ---500mA
MOD ENEX TPRE V
EQ
PLAY /PAUS ESTAN DBY U SB
5V ---5 00m A
1
1
2
2
3
3
4
5
4
5
6
67
1.STANDBY
2.PLAY/PAUSE
3.EQ
4.PREV
5.NEXT
6.MODE
7.USB
1.SW OUT
2.DC 16V IN
3.OPTICAL
4.COAXIAL
5.AUX INPUT
6.POWER SWICTH
1 2
Please read these operating instructions carefully before use.
1. Ensure that the voltage requirements for the unit match those of your mains power supply. Please see rating label for
information. Plug the power cable into the wall power socket.Turn the power switch on at the back of the unit. The unit will
initially be set in standby mode. Press the power button on the remote control and a green light will blink once and turn on.
2. Press mode to select which source you want to use, such as: BLUETOOTH, USB, OPTICAL, AUX, COAXIAL.
2.1 BLUETOOTH: after selecting Bluetooth mode, the blue light on the front panel will flash and make a "beep" sound. You can now
search and pair with the SBS-880 device from your phone or computer.
2.2 USB:When you select USB mode, you may plug a USB into the unit and it will play the music stored on the USB.
2.2.1 Please note that the USB mode is the primary media mode, so even if you are listening to music via AUX mode, when you
plug a USB into the unit, the USB will start to play.
2.2.2 Please note that the order in which the tracks are saved on the USB is how they will be played once the USB is plugged into
the unit.
2.2.3 If you want to select a specific track, e.g. 31, all you need to do is , .press 3 and 1 and then
2.3 OPTICAL: By selecting optical mode, you will be able to play music from an optical device.
2.4 AUX: By selecting AUX mode, you will be able to play tracks from an AUX device.
3.You can increase or decrease Volume, Treble or Bass by + or - corresponding buttons on the remote control. pushing the
4.In order to reset to factory setting press RESET button.
BASS+
BASS-
EQ
REPEAT
3D
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15