Sintrones VDM-700HD User manual

User Manual 0
VDM-700HD
In-Vehicle Monitor
User Manual
V1.0

User Manual 1
SINTRONES® Technology Corp.
User Manual
Copyright
© 2022 by SINTRONES® Technology Corp. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into
any language, or transmitted in any form or by any means such as electronic, mechanical, magnetic,
optical, chemical, photocopy, manual, or otherwise, without prior written permission from SINTRONES®
Technology Corp.
Other brands and product names used herein are for identification purposes only and may be
trademarks of their respective owners.
Disclaimer
SINTRONES® Technology Corp. shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
SINTRONES® Technology Corp. makes no representation or warranty regarding the content of this
manual. Information in this manual had been carefully checked for accuracy; however, no guarantee is
given to the correctness of the contents. For continuing product improvement, SINTRONES® Technology
Corp. reserves the right to revise the manual or make changes to the specifications of this product at any
time without notice and obligation to any person or entity regarding such change. The information
contained in this manual is provided for general use by customers.
Declaration of Conformity
The CE symbol on your product indicates that it complies with the Union European
(EU) directives. A Certificate of Compliance is available by contacting Technical
Support. This product has passed the CE test for environmental specifications when
shielded cables are used for external wiring. We recommend the use of shielded
cables.
This product has been tested and found to comply with the limits for a Class B device,
according to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used
by the manufacturer’s instructions, may cause harmful interference to radio
communications.

User Manual 2
Trademarks
SINTRONES® is a registered trademark of SINTRONES® Technology Corp.
All the trademarks, registrations, and brands mentioned herein are used for identification purposes only
and may be trademarks and registered trademarks of their respective owners.
Safety Information
Read the following precautions before setting up a SINTRONES® Product.
Electrical safety
◼To prevent electrical shock hazards, disconnect the power cable from the electrical outlet
before relocating the system.
◼When adding or removing devices to or from the system, ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible, disconnect all
power cables from the existing system before adding a device.
◼Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
◼Seek professional assistance before using an adapter or extension cord. These devices could
interrupt the grounding circuit.
◼Ensure that your power supply is set to the correct voltage in your area. If you are not sure
about the voltage of the electrical outlet you are using, contact your local power company.
◼If the power supply is broken, do not fix it by yourself. Contact a qualified service technician
or your retailer.
Operation safety
◼Before installing the motherboard and adding devices, carefully read all the manuals that
came with the package.
◼Before using the product, ensure all cables are correctly connected and the power cables are
not damaged. If you detect any damage, contact your dealer immediately.
◼Keep paper clips, screws, and staples away from connectors, slots, sockets, and circuitry to
avoid short circuits.
◼Avoid dust, humidity, and temperature extremes. Please do not place the product in any area
where it may become wet.
◼Place the product on a stable surface.
◼If you encounter technical problems with the product, contact a qualified service technician
or your retailer.

User Manual 3
Environmental safety
◼Use this product in environments with ambient temperatures between 0˚C and 60˚C.
◼Do not leave this product in an environment where the storage temperature may be below
-30°C or above 85°C. To prevent damages, the product must be used in a controlled
environment.
CAUTION
Incorrectly replacing the battery may damage this computer. Replace only with
the same or equivalent as recommended by SINTRONES® Technology Corp.
Dispose of used battery according to the manufacturer's instructions.
Technical Support
Please do not hesitate to call or e-mail our customer service when you cannot fix
the problems.
⚫TEL: [phone]
⚫FAX: [phone]
⚫E-mail: [email protected]
⚫Website: www.sintrones.com

User Manual 4
TABLE OF CONTENTS
1.0 PRODUCT INTRODUCTION........................................................................................................6
1.1 Overview...........................................................................................................................................6
1.2 Key Features .....................................................................................................................................6
1.3 Specification .....................................................................................................................................7
1.4 Power Consumption .........................................................................................................................9
1.5 Package Contents .............................................................................................................................9
1.6 Ordering Information .......................................................................................................................9
1.7 Optional Accessory ...........................................................................................................................9
2.0 SYSTEM I/O ....................................................................................................................................11
2.1 Front Panel Information .................................................................................................................11
2.2 I/O Information...............................................................................................................................12
2.3 Dimensions .....................................................................................................................................13
2.4 I/O Connector Definition ...............................................................................................................14
2.4.1 DVI Connector.................................................................................................................................14

User Manual 5
Chapter 1
Product Introduction

User Manual 6
1.0 PRODUCT INTRODUCTION
1.1 Overview
VDM-700HD is a touch monitor designed with wide power input voltage range and operating
temperature which are dedicated for In-Vehicle computing. An ideal operating terminal for
fleet management and smart cockpit applications on commercial vehicles. The panel
resolution of 1280*720 and typical brightness of 600 nits excel among other 7” monitors in
the market. SINTRONES’proprietary cable design which delivers video, audio, touch signal,
and power all in one cable connection provides effortless deployment and installation.
1.2 Key Features
⚫Effortless one cable connection

User Manual 7
⚫1280(H)×720(V) High Resolution
⚫High Brightness 600 nits
⚫Secondary Video Input (HDMI)
⚫Projected Capacitive Multi-touch
⚫9-48V DC Input and Operating Temp.: -20~60°C
⚫Vehicle Regulation E13
1.3 Specification
LCD
Screen Size / Ratio
7 inches / 16:9
Resolution
1280 (H)×720 RGB(V)
Active Area (mm)
156.48(H)×80.136(V)mm
View Angle (H/V)
80/80/80/80 deg.
Brightness (nits)
600 nits (typical)
Contrast Ratio
1000:1 (typical)
Backlight Type
LED
Touch
Type
Projected Capacitive w/ Multi-touch
I/O
Multi-IO
1 x DVI-D 29 pins Connector for DVI-D Single Link Video, Touch (USB 2.0),
Line in, MIC out, and DC 9~48V Power input
* SINTRONES custom pin definition for SINTRONES optional cable only
Secondary Video Input
1 x HDMI
Audio
Microphone
2 x bulit-in digital MIC
Speaker
Stereo speaker with built-in amplifier
Mechanical
Dimension
188.5 (L) x 124.2 (W) x 31.4(H) mm
Mounting
VESA MIS-D 75mm

User Manual 8
Weight
510g
IP Rating
(Front) IP65; (others) IP4X
Environmental
Operating Temp.
-20ºC ~ 60ºC w/0.6 m/S airflow
Storage Temp.
-40ºC ~ 80ºC
Relative Humidity
10% RH –90% RH (non-condensing)
Vibration
IEC60068-2-64, random, 2.5G@5~500Hz, 1hr/axis
MIL-STD-810G, Method 514.6, Procedure I, Cat.4, Operating
Shock
Operating: MIL-STD-810G, Method 516.6, Procedure I, Trucks and semi-
trailers=15G (11ms)
Certifications
CE, FCC Class A, E13
Ordering Information
Model Number
VDM-700HD
Description
16:9 7" 600nits In-Vehicle Monitor w/ P-CAP multi-touch
State of Origin
Made in Taiwan

User Manual 9
1.4 Power Consumption
VDM-700HD
Voltage
Power Status
9V
12V
24V
48V
Operating
1054mA
9.59W
760mA
9.576W
396mA
9.58W
197mA
9.51W
1.5 Package Contents
Your product package should include the items listed below. If any of the items below is missing,
contact the distributor or dealer from whom you purchased the product.
Item
Description
Function
Q’ty
Screws M4*L10 for VESA mount
VESA mounting screws
4
1.6 Ordering Information
1.7 Optional Accessory
SINTRONES provides optional accessories as follows. Please get in touch with your dealer or us if you
need any.
Item
Order No.
Description
Cable
341027150200
DVI to DVI L:1500mm
Cable
341027150201
DVI to 4 Ports Combo L:1500mm
*Please check with SINTRONES’ sales representatives for the availability.
Model Name
Description
VDM-700HD
16:9 7" 600nits In-Vehicle Monitor w/ P-CAP multi-touch

User Manual 10
Chapter 2
I/O and Connectors

User Manual 11
2.0 SYSTEM I/O
2.1 Front Panel Information
Icon
Mode
Normal
Input
Source
Menu
Brightness
Up
Brightness
Down
N/A
Power
On/Off
OSD Menu
Exit
Exit/Return
Move Up
Move
Down
Confirm
Power
On/Off

User Manual 12
2.2 I/O Information

User Manual 13
2.3 Dimensions
Unit: mm
VDM-700HD
Unit: mm

User Manual 14
2.4 I/O CONNECTOR DEFINITION
2.4.1 DVI Connector
Connector Type
Connector
Location
Connector
Drawing
PIN# Interface PIN# Interface
PIN 1 DVI_TX2_N (TMDS) PIN 16 DVI_HPD (Hot plug detect)
PIN 2 DVI_TX2_P (TMDS) PIN 17 DVI_TX0_N (TMDS)
PIN 3 GND PIN 18 DVI_TX0_P (TMDS)
PIN 4 5V USB PIN 19 GND
PIN 5 +12V PIN 20 RS232_RX
PIN 6 DVI_DDC_CLK PIN 21 +12V
PIN 7 DVI_DDC_DATA PIN 22 GND
PIN 8 RS232_TX PIN 23 DVI_CLK_P (TMDS clock)
PIN 9 DVI_TX1_N (TMDS) PIN 24 DVI_CLK_N (TMDS clock)
PIN 10 DVI_TX1_P (TMDS) C1 Line in_Left
PIN 11 GND C2 Line in_Right
PIN 12 USB_7N C3 Mic_Left
PIN 13 USB_7P C4 Mic_right
PIN 14 +5V C5 GND_Audio
PIN 15 GND
DVI
DVI 29 Pins