Siren SV-TCL User manual

Contents
English..............................1-24
Deutsch............................25-50
Francais...........................51-75
Español...........................76-99
Italiano..........................100-125

English
1
1
1. After Sales Service ············································ 02
2. Alarm Receiver Introduction
2.1. Alarm receiver introduction ································· 03
2.2. Alarm receiver overview ·····································04
2.3. Operating guide ··············································· 05
2.4. Multiple SV-TCL cameras connect to the same alarm ··· 07
3. SV-TCL Trail Camera Introduction
3.1. Trail camera working principle ···························· 09
3.2. Warning ·························································10
3.3. Camera overview ············································ 12
3.4. Brief operation of the camera ······························ 13
3.5. Specification ···················································14
4. Preparing the Camera
4.1. Power supply ·················································· 15
4.2. Inserting the memory card ··································· 16
5. Setup Menu and Functions ·································· 18
6. FAQ ·······························································24

After Sales Service
2
1. After sales service
Choose us! We provide you with the best products and services, and
always focus on professional brand.
We are committed to sincere and thoughtful service to ensure customer
satisfaction. If you have any questions or concerns about our products,
please feel free to email us at:
[email protected]
We will reply you within 24 hours and provide you with a 100%
perfect solution.
If you want to learn more about the following information, you can
scan the QR code to visit our website
(www.coolifeeu.com)
■ Beginner tutorial
■ Download the manuals for different
models
■ Get new product information
■ FAQ (Frequently Asked Questions and Answers)
■ Make suggestions or complaints about the products
■ Product operation video

Alarm Receiver Introduction
3
2.1. Alarm receiver introduction
This product is designed to accompany the trail camera with the alarm
function. It can receive the wireless alarm signal from the hunting
camera at a distance Instructions for use 400m/1300ft(open area)! and
alarm with the sound, light and vibration.
How the product works: when the hunting camera ’s(with alarm
transmitter module installed) alarm function is turned ON, and the
wireless alarm is also switched ON, if the hunting camera detects a
moving target passing by in the automatic detection shooting mode (i.e.
"ON" mode), it will be turned ON immediately to take photos or record
videos. At this time, a wireless alarm signal will be sent to the alarm.
When the wireless alarm receives the signal, it will immediately start
the alarm of sound, light and vibration to remind the user to pay
attention（Only wireless alarm signal can be sent，cannot send image
data). When the hunting camera is in TEST mode (" TEST "mode) or
time-lapse recording mode (" Timelapse" mode), the alarm output
function will be automatically turned off to avoid false alarm.

Alarm Receiver Introduction
4
2.2. Alarm receiver overview

Alarm Receiver Introduction
5
2.3. Operating guide
In normal circumstances, the wireless alarm and the trail hunting
camera will be pre-paired before leaving the factory, so customers do
not need to "Match Code". The customer only needs to turn on the
alarm function. Default set as Alarm Receiver Zone1 (Z1) .
1) Alarm--Turn on the alarm function: Install battery → Alarm power
switch from "OFF" to "ON".
2) Camera--Turn on the alarm function: Turn the switch of the camera
to "TEST" mode → Click "MENU" button to enter the system MENU
interface →Select "Match code" options → Click "OK" button → The
alarm starts to issue an alert → the alarm match code is successful
→Turn the switch of the camera to "ON" mode→The camera start to
work.
For details, please scan the QR code or enter our official website to
view the specific operation video (www.coolifeeu.com)

Alarm Receiver Introduction
6
Note:
1.The alarm function is only valid when the automatic sensor mode ("
ON ") is turned ON.
2.The camera will continue to transmit the alarm signal for 20 seconds.
This 20 seconds is used for code pairing of the alarm receiver.
3. Sound, light and vibration alarm function Stop: When the alarm
receives the alarm signal from the hunting camera and starts the alarm,
this state will last for 20 seconds. The user can press the “INPUT”
button on the top of the alarm to stop.
4.When the hunting camera is in TEST mode (" TEST "mode) or
time-lapse recording mode (" Timelapse" mode), the alarm output
function will be automatically turned off to avoid false alarm.

Alarm Receiver Introduction
7
2.4. Multiple SV-TCL cameras connect to the same alarm
operating guide
Step 1: Turn on "Match code" for the hunting camera:
1. Turn ON the alarm power switch from "OFF" to "ON".
2. Turn the switch of the camera to "TEST" mode.
3. Press the camera "MENU" button to enter the system MENU
interface.
4. Select "Match code" options.
5. Press the "OK" button.
Note: The camera will continue to transmit the alarm signal for 20
seconds. This 20 seconds is used for code pairing of the alarm receiver.
Step 2: Turn on the alarm and signal matching function ("Match
Code" button):
1. Turn ON the alarm power switch.
2. Open the power lid.
3. Press the "Match Code" button once.
4. For Zone 1 (Z1) settings, press and hold the "Match Code" button
for 2 seconds, the Z1 LED lights up, and the indicator flashes 3 times.
This indicates that the alarm is ready to receive signals. After the code
is successfully paired, the alarm will sound and vibrate, indicating that
Zone 1 is successfully set. After 20 seconds of camera code matching,
press the alarm mute button to stop the alarm, and the setting of Zone 1

Alarm Receiver Introduction
8
is completed.
5. For other zone selections and settings:
Press and hold the "Match Code" button for 4 seconds to enter the
Alarm Receiver Zone 2 (Z2) pairing.
Press and hold the "Match Code" button for 6 seconds to enter the
Alarm Receiver Zone 3 (Z3) pairing.
Press and hold the "Match Code" button for 8 seconds to enter the
Alarm Receiver Zone 4 (Z4) pairing.
Note: Wireless signal matching settings are required when customers
purchase alarms separately or need to configure "one alarm with
multiple cameras."
For details, please scan the QR code or enter our official website to
view the specific operation video (www.coolifeeu.com)

SV-TCL Trail Camera Introduction
9
3.1. Trail camera working principle
The trail camera is triggered by motion and variance in temperature.
The trail camera is able to do this by using a motion sensor. The PIR
sensor is aware that something is in front of them by changes in motion
and the temperature difference between the moving object and the
background environment.
The trail camera detects animals or people by sensing changes in
infrared light that occurs when the subject enters the camera's IR
detection zone: When the subject enters camera's IR detection zone, the
sensing module of the trail camera will start the camera to complete the
capture, thereby obtaining photos and videos. If the subject leaves the
detection zone, the trail camera is in a dormant standby state, for
example, the trail camera starts to capture again when it enters the
detection zone again.
Applications
■ Hunting: scouting an area for gaming
■ Wildlife observation at the backyard or garden: spying on the natural
world, indulging your interest in wildlife
■ Indoor/outdoor security surveillance

SV-TCL Trail Camera Introduction
10
3.2. Warning
■ While you are checking the camera under the TEST mode, the
ambient light source is unstable because your hands are holding the
camera and moving, the PIR sensor will be triggered to work, and you
might hear clicking sounds accompanied by screen flickering, which is
normal.
■ It is recommended to use high-performance alkaline batteries, which
can prolong the use time of the camera. It is not recommended to use a
1.2V rechargeable battery, because the working voltage of the hunting
camera requires1.5V. If the battery voltage is insufficient, it will not
work properly and drain the battery fast after working for only few
hours (the camera will show that the battery is low).
■ When using the hunting camera for the first time, please format the
memory card before using.
■ When placing the battery, please be sure the polarity of the batteries
is correct, if not, it will cause the camera to short circuit and burn out.
Please note that the camera is not protected by the short circuit!
■ When using the product for the first time, please remove the layer of
protective film on the lens and on the sensor of the product.
■ Ensure that the motion sensor is not dirty or damaged , if there is any
scratch or damage, it will affect the normal triggering of the camera.
■ Field installation: please make sure that the buckle of the camera and
the bottom DC plug are all closed and sealed, otherwise the camera

SV-TCL Trail Camera Introduction
11
could be damaged in the rain.
■ The included mini USB cable is only used to transfer files from the
camera to the PC, please do not use it to charge the camera or the
rechargeable battery, it will seriously damage the camera.
■ Please keep the camera lens and infrared sensing windows clean. If
dirty, clean with a soft glasses cloth.
■ Do not scratch the LCD display screen, camera lens, infrared sensing
windows and IR led glasses with any sharp objects.
■When it is at low battery level, please replace all the batteries on time
to avoid leakage of the electrolyte that could damage the camera.
■Please read more notices from the next chapters.
If you want to know more information, please go to our
website(www.coolifeeu.com) to view or directly scan the QR code
to get more information.

SV-TCL Trail Camera Introduction
12
3.3. Camera overview

SV-TCL Trail Camera Introduction
13
3.4. Brief operation of the camera

SV-TCL Trail Camera Introduction
14
3.5. Specification

Preparing the Camera
15
External power supply port
supply
4.Preparing the Camera
4.1. Power supply
This camera supports 2 ways of power supply: AA battery or external
power supply.
■A battery: Place 4 or 8 pieces 1.5V AA batteries,and make sure the
battery polarity is correct.
■A good option to get longer battery life is to add an external power
supply: At the bottom of camera, there is an external power supply(DC)
port, you can use a 6V 1.5A-2A AC adapter with 3.5mm*1.35mm
DC jack size or you can use a 6V 1.5A-2A trail camera solar panel.
Notice:
■ It is not recommended to use 1.2V rechargeable batteries, because it
is not enough to support the normal operation of the camera. We
recommend high-performance alkaline batteries (not included).
■ Avoid mix-matching brands, types, or ages of the batteries, which
will greatly increase the odds of a battery leaking, leading to a

Preparing the Camera
16
damaged camera.
■ Anytime you place or remove the batteries, make sure that the
camera is OFF.
■ Most batteries will lose their activity when working at low
temperatures, leading to a camera failure. Put the camera indoors and it
will return to work normally. Rechargeable batteries cannot be
recharged in the camera with an external power supply.
■ It is not recommended to use a universal external power adapter, if
the voltage is adjusted to inaccurate, you risk to burn the camera.
■ When using an external power source, please keep the four new
batteries in( Avoid External Power Suspension).
4.2. Inserting the memory card
A TF/Micro SD memory card is required can it takes and saves the
videos and photos.
1.Switch OFF the camera;
2.Insert the memory card;
3.Push the memory card into
the card slot until it clicks into place;
To remove the memory card, please push the card in again until it is
partly ejected.
Notice:
■ Please format the memory card if it is used for the first time or if it

Preparing the Camera
17
has been used with other cameras before.
■ Don’t remove the card or turn off the power while formatting or
reading or saving the files from the memory card, this might lead to
data losses.
■ Suggest to use the micro SD card at least class 10 or higher.
■ Be sure the power switch is OFF before inserting or removing the
memory card or batteries.
■ If the memory card has been used for many times, its performance
might be reduced. If the memory card performance decreases, please
replace the old new memory card with the new one.
■ If the capacity of the memory card is full, the camera will stop
recording automatically and the LEDs will be off. Turn on the loop
recording function if you want to keep on saving data: in this case the
newest data will replace the oldest.
■ Do not insert the memory card forcibly. Please refer to the marking
on the camera. Press the edge of the card gently to pop up the TF card.