Sirio Antenne DS031 User manual

ATTENTION
INSTRUCTION MANUAL ENCLOSED
INSTRUCTION MANUAL ENCLOSED
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, PLEASE EMAIL OR CALL
THE CUSTOMER SERVICE BEFORE YOU RETURN THIS PRODUCT TO
THE STORE WHERE YOU PURCHASED FROM.
For Customer Service:
USA: Email: [email protected] /Call: 1-877-897-1222
CANADA: Email: [email protected] / www.sirio.ca
Call: 1-866-666-0421
**When emailing Customer Service, please include your Order Number
and platform of purchase in the email subject for quicker assistance.

OUTDOOR DINNING TABLE
OUTDOOR DINNING TABLE ASSEMBLY INSTRUCTION
DS031&DS032&DS033&DS074
PARTS LIST
Part Description Quantity
PARTS
A Table Feet 2
B Table Top 1
C Reinforce Pole 1
HARDWARE
D Bolts 20mm 24
E Washers 24
F Allen Key 1
For Customer Service:
Email: [email protected]
[email protected] / www.sirio.ca
Call:1-877-897-1222 / 1-866-666-0421

1. Locate the Reinforce Pole(C) to both Table Feet(A) by aligning the
pre-drilled holes. Each Washer(E) goes with one Bolt(D). Half-fasten the
Bolts(D) by hand. (Photo 1)
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and
unwrap all parts. Make sure you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts,
please email Customer Service: USA: [email protected] or call
1-877-897-1222. Canada: [email protected] / www.sirio.ca or call
1-866-666-0421. Please identify the parts you need and model number.
Make sure to include your name and address.
3. Please include your Order Number and platform of purchase in the email
subject, and one of our customer service representative will get back to you.
Warm Tips:
1. The plastic covers on some metal parts are just for product protection.
Please remove it before assembly.
2. Please follow the sequence of AI during assembly.
3. Do not tighten the screws until all of them are in right positions.
D&E

2. Locate the Table Feet(A) to the Table Top(B) by the pre-drilled threads.
Fasten the Bolts(D) with the Allen Key(E). Each foot should have 4 fastened
bolts. (photo 2)
3. Fasten all the Bolts(D) with the Allen Key.
Till now you have finished the whole assembly and enjoy your dinning corner
with the table!!
D&E