
Sirius AW - 415 4G PTZ Camera Quick Guide
Download the Smart life Home App or the Tuya App on Google Play Store or Apple App Store.
Open Smart life Home App or Tuya App. Follow the onscreen prompts to register and log into your
App. The App is free.
Camera Installation
Step 1
Insert the Sim Card. Check diagram 1
Step 2
Insert the SD Card. Check diagram 1
Step 3
Power up the camera. Check diagram 1
A red Led will start to blink as the camera tries to connect to the telco network. Once successfully
connected to the telco network the Led will turn blue. If the camera dose not connect the first time,
power down the camera for 5 seconds and then re-power the camera to repeat.
Sirius AW - 415 App Connection Setup
1 Open the Smart Life or Tuya App.
2 Tap Add the new device icon and then add device.
3 Tap the scan QR Code Icon.
4 Scan QR Code that is on the camera housing.
5 Wait for the configuration to finish then tap Done.
You should now have a image appear on the App
Camera Settings
Tap the settings icon at the top right hand corner.
4G PTZ battery camera Naming the Camera
Device information Cameras internal information
Tap to run and automation Single button control
Basic function settings Turn on/off two way talk
Nightvision mode Turn to auto or IR mode
Working mode Power saving modes
Detection alarm settings Turn on/off Human body filtering mode
Pir Pir settings = off - low - medium - high
Power management settings Checking the camera batteries levels
Storage settings SD Card formatting
Cloud storage Sign up for cloud storage recording services
Offline notification Send offline notifications after 30 minutes
FAQ & Feedback Help Manual
Share device Share device to another phone (See below)
Add to home screen Move app to phones home page
Device updates Device updates
Remove device Remove camera from phone
IPC PC client N/A