SitOnit Seating EON User manual

C6474 Rev. A
EON
ASSEMBLY INSTRUCTIONS
Power up with a selection of convenient, high-performing power outlet options. EON oers
a dual power unit as well as a single power unit with a USB port option, to accommodate
dierent desks and work needs. All models install easily with a surface mount clamp.
EON POWER UNIT, DESKTOP MOUNT,
DUAL OUTLET
EON POWER UNIT, DESKTOP MOUNT,
SINGLE OUTLET, DUAL USB

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
EON ASSEMBLY INSTRUCTIONS
REQUIRED TOOLCOMPONENT LIST
COMPONENTS
1:1 SCALE
• Main Unit (1)
• Clamp Mount (1)
• M3 ×13.5 mm Screw (2)
Main Unit Clamp Mount
M3 × 13.5 mm Screws
M3 × 13.5 mm Screw
#1 Phillips Screwdriver
2

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
EON ASSEMBLY INSTRUCTIONS
STEPS
1
1. Place main unit face-down onto a rm, at surface.
2. Using a #1 Phillips screwdriver, attach clamp mount to main unit with two M3 ×13.5 mm screws.
2
3

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
EON ASSEMBLY INSTRUCTIONS
STEPS
3
3. Place completed assembly onto desired location along table surface edge.
4. Rotate underside knob clockwise until support plunger is tightly pressed against table surface.
4
4