SkeeterVac SV5100 User manual

Outdoor LP Gas Mosquito Exterminator
Model No. SV5100
Manufactured in China for: Blue Rhino Global Sourcing, Inc
Winston-Salem, NC USA • 1.888.753.7137, www.bluerhino.com
© Blue Rhino Global Sourcing, Inc. All Rights Reserved
SkeeterVac®and FineTune®are registered trademark of Blue Rhino Global Sourcing, Inc.
WaveDrawer®and TacTrap™ are trademarks of Blue Rhino Global Sourcing, Inc. All Rights Reserved. SV5100-OM-108 E
Table of Contents
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Exploded View & Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Assembly Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing LP Gas Tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
InsertLPGasTank................................................ 6
SecureLPGasTank............................................... 6
ConnectLPGasTank.............................................. 7
Disconnect LP Gas Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Important Mosquito Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Important Information about Octenol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Important Information About Ultraviolet Light. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
MosquitoFacts.................................................. 7
Controlling Mosquitoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HelpfulLinks.................................................... 7
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CheckingforLeaks............................................... 8
Placement...................................................... 8
FineTune®: Customizing the Lure Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Lighting........................................................ 8
TurningOff ..................................................... 8
CleaningandCare ................................................. 8
Beforeeachuse ................................................. 8
Cleaning Instructions / Routine Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Replacing Igniter Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
End of Season Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
LimitedWarranty .................................................. 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
The use and installation of this product must conform to local codes. In absence of
local codes, use the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and
Propane Installation Code, CSA B149.1.
California Proposition 65: Chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm are created by the combustion of propane.
California Proposition 65: Wash your hands after handling this product.
Save these instructions for future reference. If you are assembling this unit for
someone else, give this manual to him or her to read and save for future reference.
OWNER’S MANUAL
GAS-FIRED
3PRO
Made from 75% Bagasse
(Environmentally Friendly Sugar
Cane Pulp By-product)
DANGER CARBON MONOXIDE HAZARD
• This appliance can produce
carbon monoxide which has no
odor.
• Using it in an enclosed space
can kill you.
• Never use this appliance in
an enclosed space such as a
camper, tent, car or home.
WARNING
FOR YOUR SAFETY:
For Outdoor Use Only
(outside any enclosure)
WARNING
FOR YOUR SAFETY:
1. Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage.
2. Read the installation, operation, and
maintenance instructions thoroughly before
installing or servicing this equipment.
3. Failure to follow these instructions could
result in fire or explosion, which could cause
property damage, personal injury or death.
4. This instruction manual contains important
information necessary for the proper
assembly and safe use of the appliance.
5. Read and follow all warnings and
instructions before assembling and using
the appliance.
6. Follow all warnings and instructions when
using the appliance.
7. Keep this manual for future reference.
DANGER
If you smell gas -
1. Shut off gas to appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fire department.
WARNING
FOR YOUR SAFETY:
1. Do not store or use gasoline or other
flammable liquids or vapors in the vicinity of
this or any other appliance.
2. An LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.
WARNING
FOR YOUR SAFETY:
Keep out of reach of Children

Outdoor LP Gas Mosquito Exterminator Model No. SV5100 Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
This SkeeterVac®is for outdoor use only, and shall not be used in a
building, garage or any other enclosed area.
Do NOT operate, light or use this appliance within ten (10) feet (3.05 m)
of walls, structures, buildings or combustible materials.
It is a violation of Federal law to use this product in a manner
inconsistent with its labeling.
This SkeeterVac®is not intended for and should never be used as a
heater. TOXIC fumes can accumulate and cause asphyxiation.
This SkeeterVac®is safety certified for use in the United States and/or
Canada only. Do not modify for use in any other location. Modification
will result in a safety hazard.
For residential use only. This SkeeterVac®is NOT for commercial use.
This SkeeterVac®is for use with liquid propane (LP) gas only. The
conversion to or attempted use of natural gas in this LP gas SkeeterVac®
is dangerous and will void your warranty.
LP gas Characteristics:
a. LP gas is flammable and hazardous if handled improperly. Become
aware of the characteristics before using any LP gas product.
b. LP gas is explosive under pressure, heavier than air, and settles and
pools in low areas.
c. LP gas in its natural state has no odor. For your safety, an odorant is
added that smells like rotten cabbage.
d. Contact with LP gas can cause freeze burns to skin.
LP gas tank needed to operate. Only tanks marked “propane” may be
used.
The LP gas tank must be constructed and marked in accordance
with the Specifications for LP gas Cylinders of the U.S. Department of
Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339,
Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods;
and Commission.
LP gas tank must be arranged for vapor withdrawal.
The LP gas tank must have a listed overfilling prevention device (OPD).
Only use LP gas cylinders equipped with a cylinder connection device
compatible with the connection for outdoor cooking appliances.
The LP gas tank must have a tank collar to protect the tank valve.
Never use an LP gas tank with a damaged body, valve, collar, or footing.
Dented or rusted LP gas tanks may be hazardous and should be checked
by your LP gas supplier prior to use.
The LP gas tank should not be dropped or handled roughly.
Always transport your tank in a secure, well-ventilated location in your
vehicle. LP gas tank should be upright with valve turned off. LP gas tank
should be taken directly to and from place of use.
LP gas tanks must be stored outdoors out of the reach of children and
must not be stored in a building, garage or any other enclosed area. Your
tank must never be stored where temperatures can reach over 125°F.
Do not insert any tool or foreign object into the valve outlet or safety
relief valve. You may damage the valve and cause a leak. Leaking
propane may result in explosion, fire, severe personal injury or death.
Never keep a filled LP gas tank in a hot car or car trunk. Heat will cause
the gas pressure to increase, which may open the relief valve and allow
gas to escape.
Place dust cap on cylinder valve outlet whenever the cylinder is not in
use. Only install the type of dust cap on the cylinder valve outlet that is
provided with the cylinder valve. Other types of caps or plugs may result
in leakage of propane.
If the appliance is not in use, the gas must be turned off at the supply
tank and disconnected.
Do not store a spare LP gas tank under or near this appliance.
Never fill the tank beyond 80 percent full.
A fire causing, serious injury or damage to property may occur if the
above is not followed exactly.
Never attempt to attach this SkeeterVac®to the self-contained LP gas
system of a camper trailer, motor home, or house.
The use of alcohol, or prescription or non-prescription drugs may
impair the consumer’s ability to properly assemble or safely operate the
appliance.
Strong odors, colds, sinus congestion, etc. may prevent the detection of
propane. Use caution and common sense when testing for leaks.
Your SkeeterVac®has been checked at all factory connections for leaks.
Recheck all connections as described in the “Operating Instructions”
section of the manual, as movement in shipping can loosen connections.
Check for leaks even if your unit was assembled for you by someone
else.
Do not operate if gas leak is present. Gas leaks may cause a fire or
explosion.
You must follow all leak-checking procedures before operating. To
prevent fire or explosion hazard when testing for a leak:
a. Always perform leak test before lighting the SkeeterVac®and each
time the tank is connected for use.
b. No smoking. Do not use or permit sources of ignition in the area while
conducting a leak test.
c. Conduct the leak test outdoors in a well-ventilated area.
d. Do not use matches, lighters or a flame to check for leaks.
e. Do not use SkeeterVac®until any and all leaks are corrected.
If you are unable to stop a leak, disconnect the LP gas supply. Call a
gas appliance serviceman or your local LP gas supplier.
This SkeeterVac®is designed with to operate at an inlet pressure of:
11 inch water column (2.74 kPa).
Do not store or use gasoline or other flammable liquids or vapors within
25 feet (7.62 m) of this appliance.
Do not use in an explosive atmosphere. Keep SkeeterVac®area clear
and free from combustible materials, gasoline and other flammable
vapors and liquids.
Minimum clearance from sides and back of unit to combustible
construction is 36 inches (91.4 cm). Do not use this appliance under any
type of overhang or roof.
It is essential to keep the SkeeterVac®’s valve compartment, burners,
and circulating air passages clean. Inspect SkeeterVac®before each
use.
Do not alter SkeeterVac®in any manner.
Do not use the SkeeterVac®unless it is COMPLETELY assembled and all
parts are securely fastened and tightened.
This SkeeterVac®should be thoroughly cleaned and inspected on
a regular basis. Clean and inspect the hose before each use of the
appliance. If there is evidence of abrasion, wear, cuts, or leaks, the hose
must be replaced prior to the appliance being put into operation.
Use only the regulator and hose assembly provided. The replacement
regulator and hose assembly shall be that specified by the manufacturer.
Do not attempt to repair or alter the hose/regulator for any “assumed”
defect. Any modification to this assembly will void your warranty and
create the risk of a gas leak and fire.
Use only Blue Rhino Global Sourcing, Inc. factory authorized parts. The
use of any part that is not factory authorized can be dangerous. This will
also void your warranty.
Do not use this appliance without reading “Operating Instructions” in
this manual.
Do not install or use in or on boats or recreational vehicles.
Do not use this SkeeterVac®in a vehicle trunk, station wagon, pick-up
truck, mini-van, sport utility vehicle (SUV), or recreational vehicle (RV).
Product performance can vary due to weather, wind and other
environmental conditions.
Unit will operate at reduced efficiency below 40ºF (5ºC).
Do not hang clothing or other flammable materials either on or near the
SkeeterVac®.
Never lean over the SkeeterVac®when lighting.
Do not attempt to move SkeeterVac®when in use. Allow the
SkeeterVac®to cool before moving or storing.
Storage of SkeeterVac®indoors is permissible only if the tank is
disconnected, removed from the SkeeterVac®and properly stored
outdoors.
Do not attempt to disconnect the gas regulator from the tank or any gas
fitting while the SkeeterVac®is in use.
Do not use SkeeterVac®for indoor cooking or heating. TOXIC fumes can
accumulate and cause asphyxiation.
If at any time you are unable to light burner and smell gas, turn off,
wait 5 minutes to allow gas to dissipate before attempting to light
SkeeterVac®.
Failure to not wait 5 minutes to allow the gas to clear if the SkeeterVac®
does not light, may result in an explosive flame-up.
After a period of storage and/or nonuse, check for leaks, burner
obstructions and inspect for any abrasion, wear or cuts to the hose.
Keep air intake areas clear of dust, dirt and debris
Do not allow children to operate or play near a SkeeterVac®device when
it is in use.
Inspect for damage and wear during each maintenance cycle.
It is recommended to use only FineTune®mosquito attractant in your
SkeeterVac®. The use of other attractants has not been tested with your
product, and void your warranty.
Use protective gloves when assembling this product.
Do not force parts together as this can result in personal injury or
damage to the product.
Deaths, serious injury or damage to property may occur if the above is
not followed exactly.
DANGER: Failure to follow the dangers, warning and cautions in this manual may result in serious bodily injury or death, or in a fire or an explosion
causing damage to property.
WARNING:

Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
page no.
3
Parts List
1TacTrap™ CPSX000021
2Lure Cover 57-07-110
3FineTune®Lure CPSX000014
4Regulator/Hose Assembly 57-07-116
5Engine Assembly 57-08-004
6WaveDrawer®57-08-005
7WaveDrawer®Cover 57-08-006
8Battery Cap 57-07-103
9AA Battery*
10 Handle 57-07-136
11 Rear Cart Frame 55-07-141
12 Front Frame (2) 57-07-135
13 Canvas Cover 57-07-132
14 LP Gas Tank Retainer
Belt 57-07-138
15 LP Gas Tank Cover 57-07-137
16 Wheel (2) 57-08-007
17 Hub Cap (2) 57-08-017
18 LP Gas Tank (Not Included)
19 Cart Frame Base 57-07-133
* Pre-installed
Exploded View
Hardware
ABolt M5 x 40, Stainless steel 4 pcs
BBolt M8 x 40, Stainless steel 4 pcs
CNut M8 Chrome Plated 2 pcs
DWing Nut M5 Black 4 pcs
EWing Nut M8 Black 4 pcs
FWasher ø8 Stainless Steel 2 pcs
GAA Battery 1 pc
4
1
3
56
10
2
11
12
Tools Required for Assembly (Not Included)
M8 Wrench
7
8
13
14
16
17
15
9
12
16
17
18
19

Outdoor LP Gas Mosquito Exterminator Model No. SV5100 Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
2
Attach Wheels and Hub Caps
Note: Do not over tighten the nuts when attaching the wheels.
Cx 2 Fx 2
4
Attach Front Frame
Ax 2
Dx 2
1
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.888.753.7137 toll free. Please have
your owner’s manual and serial number available for
reference.
Note: The model number can be found on the side of the engine.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble
your product on a hard level surface that does not have cracks
or openings.
• Clear an area large enough to layout all components and
hardware.
• When applicable, tighten all hardware connections by hand
first. Once the step is completed go back and fully tighten all
hardware.
• Follow all steps in order to properly assemble your product.
To complete assembly you will need:
• (1) Leak Detection Solution (Instructions on how to make
solution are included in the “Operating Instructions” section of
this manual)
• (1) Precision Filled LP Gas Grill Tank with Acme Type 1 external
threaded valve connection (4-5 gallon size)
Typical assembly: approximately 30 minutes.
Assembly Instructions
3
Attach Cart Frame Handle
Ax 2
Dx 2

Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
page no.
5
7
Attach Engine
5
Attach Cart Frame Base
Bx 4
Ex 4
8
Insert FinueTune®Lure and Attach Lure Cover
6
Insert Battery
Gx 1
Assembly Instructions

Outdoor LP Gas Mosquito Exterminator Model No. SV5100 Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
Installing LP Gas Tank
To operate you will need (1) precision-filled standard grill LP gas
tank (20#) with external valve threads.
Note: An empty standard grill LP gas tank weighs approximately
18 lbs. A precision-filled standard grill LP gas tank should weigh
no more than 38 lbs.
Caution: LP gas tank must be properly
disconnected and removed prior to moving this
SkeeterVac®.
Place LP Gas Tank Cover
Place the LP gas tank cover onto the LP gas tank.
Insert LP Gas Tank
Place precision filled LP gas tank upright into hole in SkeeterVac®body so it is arranged for
vapor withdrawal.
Secure LP Gas Tank
Secure tank by wrapping the LP gas tank retainer belt over collar of the LP gas tank.
Assembly Instructions (continued)
9
Insert WaveDrawer®
CAUTION: Do not operate SkeeterVac®with WaveDrawer®cover on the
WaveDrawer®. Cover is only used when emptying or inspecting trap.
Attach TacTrap™
10
Operate WaveDrawer®Cover
CAUTION: Do not operate SkeeterVac®with WaveDrawer®cover on the
WaveDrawer®. Cover is only used when emptying or inspecting trap.
Place WaveDrawer®Cover

Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
page no.
7
Important Mosquito Information
Important Information
Your SkeeterVac®device operates 24 hours a day to help reduce the nuisance of mosquitoes.
It attracts female mosquitoes that are seeking a blood meal to nourish their eggs. By removing
these females you also remove their eggs.
• It may take up to 3-4 weeks to see a noticeable reduction in the nuisance. Be patient.
• Begin operating your SkeeterVac®device once low temperatures remain above 50ºF
• To reduce and maintain mosquito populations it is important for your SkeeterVac®device to
operate continuously. Do not turn off the LP gas tank valve until your Skeetervac®turns off,
then immediately replace the empty tank with a full tank of propane
• Always contact our experts before returning product to place of purchase
Important Information About Octenol
Your SkeeterVac®device includes a lure that contains octenol (1-octen-3-ol). This pesticide is
an effective attractant supplement for some mosquito species.
KEEP OUT OF REACH OF CHILDREN
Caution: Harmful if swallowed, absorbed through the skin or inhaled.
Avoid contact with skin, eyes and mouth. Wash hands thoroughly with
soap and water after handling.
Important Information About Ultraviolet Light
This device radiates intense ultraviolet (UV) light when operated.
Caution: Do not look directly at the device during operation. Exposure
to UV light, even for a brief period, can damage your eyes.
For expert assistance call toll free - 1.888.762.1142.
Always contact our experts before returning product to place of purchase.
Mosquito Facts
• About 3,000 species of mosquitoes have been identified on a worldwide basis. Approximately
150 are known to exist in North America
• There are approximately 25 known “human nuisance species” of mosquitoes
• Most adult mosquitoes only have a life span of 2-4 weeks
• Only female mosquitoes bite
• Mosquitoes are very effective at reproducing - attracting, trapping and killing just one
female mosquito at the start of mosquito season can prevent the birth of up to 25,000 more
mosquitoes that season alone!
Controlling Mosquitoes
In addition to properly installing and using a SkeeterVac® device, you can reduce mosquito
breeding around your home significantly by reducing the amount of water that is stagnating on
your property. Be aware that mosquitoes can and will develop in any puddle or pool of water
that lasts more than 4 days.
• Dispose of cans, plastic containers, pots, or similar water-holding containers that have
accumulated on your property
• Drill holes in the bottom of containers that you must leave out of doors – trash cans, recycling
bins, etc
• Clean clogged roof gutters on an annual basis
• Turn over plastic wading pools when not in use
• Turn over wheelbarrows, empty planters, or children’s toys when not in use
• Don’t allow water to stagnate in birdbaths
• Aerate ornamental pools or stock them with fish
• Clean and chlorinate swimming pools that are not being used. Don’t forget that mosquitoes
breed in the water that collects on swimming pool covers
• Use landscaping features or drainage tools to eliminate standing water that collects in low
spots on your property
Helpful Links
More information about mosquitoes in the United States can be found on the following sites,
among many others.
• The American Mosquito Control Association: http://www.mosquito.org
• US Environmental Protection Agency: http://www.epa.gov/pesticides/health/mosquitoes
• National Center for Infectious Diseases: http://www.cdc.gov . Search for “Mosquitoes”.
None of the agencies listed above is an endorser of the SkeeterVac®device, and inclusion on
the list above does not signify that they endorse the SkeeterVac®device. Links provided for
customer information only.
Connect LP Gas Tank
Before connecting, be sure that there is no debris caught in
the head of the LP gas tank, head of the regulator valve or in
the head of the burner and burner ports.
Connect gas line to tank by turning knob clockwise until it
stops.
Disconnect LP Gas Tank
Before disconnecting make sure the LP gas tank valve is
“CLOSED”.
Disconnect regulator/hose assembly from LP gas tank by
turning knob counterclockwise until it is loose.
Caution: LP gas tank must be properly
disconnected and removed prior to moving
this grill.
Need a tank of gas? Try Blue Rhino®tank exchange service. It’s easy,
fast, safe, and available at tens of thousands of conveniently located
retail outlets nationwide. You can purchase a new full tank or exchange
your empty for a precision filled one.
Visit www.bluerhino.com for a location closest to you.
Installing LP Gas Tank
To operate you will need (1) precision-filled standard grill LP gas
tank (20#) with external valve threads.
Note: An empty standard grill LP gas tank weighs approximately
18 lbs. A precision-filled standard grill LP gas tank should weigh
no more than 38 lbs.
Caution: LP gas tank must be properly
disconnected and removed prior to moving this
SkeeterVac®.
Place LP Gas Tank Cover
Place the LP gas tank cover onto the LP gas tank.
Insert LP Gas Tank
Place precision filled LP gas tank upright into hole in SkeeterVac®body so it is arranged for
vapor withdrawal.
Secure LP Gas Tank
Secure tank by wrapping the LP gas tank retainer belt over collar of the LP gas tank.

Outdoor LP Gas Mosquito Exterminator Model No. SV5100 Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
7. The needle on the engine gauge should begin to move into the “Green” zone, the LED lights
will be flickering and the vacuum fan will be running with air flow out of the engine bottom,
indicating ignition is complete.
Caution: If engine fails to light, shut LP gas off at tank and wait 5
minutes before attempting to restart the engine by following the
lighting instructions.
Turning Off
1. Turn LP gas tank valve to “CLOSED”.
Note: A “poof” sound is normal as the last of the LP gas is burned.
2. Disconnect LP gas tank per “Disconnect LP Gas Tank” instructions.
Caution: The gas supply must be turned off at the LP-gas tank when
this outdoor gas appliance is not in use.
Cleaning and Care
Caution: All cleaning and maintenance should be done when
SkeeterVac®is cool and with the fuel supply disconnected.
Caution: DO NOT clean any SkeeterVac®part in a self cleaning oven.
Caution: This SkeeterVac®should be thoroughly cleaned and inspected
on a regular basis.
Notices
1. This grill should be thoroughly cleaned and inspected on a regular basis.
2. Abrasive cleaners will damage this product.
3. Never use oven cleaner to clean any part of grill.
Before Each Use:
1. Keep the SkeeterVac®area clean and free from any combustible materials, gasoline, and
other flammable vapors and liquids.
2. Do not obstruct the flow of the combustion of LP and the ventilation air.
3. Keep the ventilation opening(s) of the LP gas tank area free and clear from debris.
4. See “Cleaning Instructions” for proper cleaning instructions.
Cleaning Instructions / Routine Service
To ensure maximum performance and to lengthen the life of your SkeeterVac®device, perform
these steps each time your tank is empty. This model will consume a standard 20# LP gas tank
every 18-21 days.
Note: While unit is in use, check the following every 2-3 days:
• Check WaveDrawer®and clean (if necessary).
• Check air passages for blockage.
1. Turn LP gas tank valve to “CLOSED”.
2. Disconnect LP gas tank per “Disconnect LP Gas Tank” instructions.
3. Remove empty tank replace with full LP gas tank.
4. Slide WaveDrawer®cover onto WaveDrawer®.
5. Remove WaveDrawer®, empty and clean.
6. Slide WaveDrawer®back into place.
7. Remove WaveDrawer®cover.
8. Remove used TacTrap™ and dispose of properly.
9. Slide fresh TacTrap™ in place and remove protective paper.
10. Remove Finetune®cover by turning counterclockwise.
11. Remove used Finetune®lure (if necessary) and properly dispose.
Note: Finetune® Lure lasts 60 days.
12. Remove fresh Finetune® lure from package (if necessary). Dispose of packaging properly.
13. Place Finetune®lure back into holder with holes orienting upward.
14. Replace Finetune®cover.
15. Select the lure output by adjusting the Finetune®cover.
16. Check engine and gas lines for any sign of damage or missing parts. Repair any problems
before attempting to start.
17. Reconnect gas line to LP gas tank by turning knob clockwise.
18. Remove tank cover from empty LP gas tank and place on full LP gas tank.
19. Perform leak check.
20. Light per “Lighting” instructions.
21. Wash hands with soap and water.
Operating Instructions
Checking for Leaks
Tank/Gas Line Connection
1. Make 2-3 oz. of leak solution by mixing one part
liquid dishwashing soap with three parts water.
2. Connect LP gas tank per “Installing LP Gas Tank”
section.
3. Turn LP gas tank valve to “OPEN”.
4. Spoon leak check solution at all “X” locations
(Figures 1 and 2).
a. If any bubbles appear turn LP gas tank valve to
“CLOSED”, reconnect and re-test.
b. If you continue to see bubbles after several
attempts, turn LP gas tank valve to “CLOSED” and
disconnect LP gas tank, per “Disconnect LP Gas
Tank” instructions, and contact 1.888.753.7137 for
assistance.
c. If no bubbles appear after one minute turn LP gas
tank valve to “CLOSED”, wipe away solution and
proceed.
Placement
Properly positioning your SkeeterVac®device is
important to maximizing performance. Since the
SkeeterVac®device attracts mosquitoes it should be
placed at least 10 feet from your living areas.
Mosquitoes typically live in areas that are shady, wet
and/or moist. Determine the primary mosquito habitat
and place your SkeeterVac®device as close as possible
to it.
If you live in an area with consistent wind, place your
SkeeterVac®device upwind from the primary mosquito
habitat.
Maximum performance may require relocating your
SkeeterVac®device from time to time. To move, place
your foot on the cart base and tilt backward by holding
the handle. Pull to the new location.
FineTune®: Customizing the Lure
Output
The amount of octenol your SkeeterVac®device
dispenses is important to maximizing performance.
Some mosquito species are highly attracted to octenol
while others are less attracted.
This product contains an easy-to-use feature that
allows you to customize the amount of octenol released
to match the species in your environment.
Note: Lure lasts 60 days.
1. Remove Finetune®cover by turning
counterclockwise.
2. Remove foil seal from the Finetune®Lure.
3. Place Finetune®lure back into holder with holes
orienting upward.
4. Replace Finetune®cover.
5. Select the lure output by adjusting the Finetune®
cover (Figures 3a, 3b and 3c).
Lighting
Caution: Keep this appliance area clear
and free from combustible materials,
gasoline and other flammable vapors
and liquids.
Caution: Do not obstruct the flow of
combustion and ventilation air.
Caution: Do not operate with
WaveDrawer®cover on the
WaveDrawer®
1. Read instructions before lighting.
2. Connect LP gas tank per “Installing LP Gas Tank”
section.
3. Turn LP gas tank valve slowly to ‘’OPEN’’
4. Press and hold control valve button (Figure 4).
5. IMMEDIATELY press and hold igniter button down
until you hear a “POP” sound indicating ignition.
Normally occurs within 20 seconds.
6. Continue to hold control valve button for 30 seconds.
Figure 1
Figure 2
X
XX
XX
Figure 3a
Lure Output: Fully Open
Figure 3b
Lure Output: Half Open
Figure 3c
Lure Output: Closed
Figure 4
Igniter
Button Control Valve
Button
Battery

Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
page no.
9
Replacing Igniter Battery
If you do not hear a clicking sound when the igniter
button is depressed, the battery may have lost its
charge. Replace battery as follows:
1. Turn LP gas tank valve to “CLOSED”.
2. Open battery compartment by turning cap on bottom
of engine counterclockwise.
3. Remove used battery and properly dispose.
4. Place fresh AA battery into compartment – negative
(–) end goes in first (Figure 5).
5. Secure cap by turning clockwise until it stops.
6. Light per “Lighting” instructions.
End of Season Storage
To lengthen the life of your SkeeterVac®device, perform these simple steps at the end of the
mosquito season.
1. Turn LP gas tank valve to “CLOSED”.
2. Disconnect LP gas tank per “Disconnect LP Gas Tank” instructions.
3. Remove tank cover.
4. Remove LP gas tank.
5. Place the protective cap cover on the LP tank and store the tank outdoors in a well ventilated
area out of direct sunlight.
6. Remove and properly dispose of the TacTrap™ and FineTune®lures.
7. Cover your SkeeterVac®device to protect from dust and store it in a cool dry place.
Caution: Storage of an outdoor gas appliance indoors is only
permissible if the tank is disconnected and removed from the outdoor
gas appliance.
Product Registration
For faster warranty service, register your product immediately at www.bluerhino.com or call
1.800.762.1142.
Limited Warranty
Blue Rhino Global Sourcing, Inc (“Vendor”) warrants to the original retail purchaser of this
product, and to no other person, that if this product is assembled and operated in accordance
with the printed instructions accompanying it, then for a period of one (1) year from the date
of purchase, all parts in such product shall be free from defects in material and workmanship.
Vendor may require reasonable proof of your date of purchase. Therefore, you should retain
your sales slip or invoice. This Limited Warranty shall be limited to the repair or replacement of
parts, which prove defective under normal use and service and which Vendor shall determine
in its reasonable discretion upon examination to be defective. Before returning any parts, you
should contact Vendor’s Customer Service Department using the contact information listed
below. If Vendor confirms, after examination, a defect covered by this Limited Warranty in any
returned part, and if Vendor approves the claim, Vendor will replace such defective part without
charge. If you return defective parts, transportation charges must be prepaid by you. Vendor will
return replacement parts to the original retail purchaser, freight or postage prepaid.
This Limited Warranty does not cover any failures or operating difficulties due to accident,
abuse, misuse, alteration, misapplication, improper installation or improper maintenance or
service by you or any third party, or failure to perform normal and routine maintenance on
the product as set out in this owner’s manual. In addition, the Limited Warranty does not cover
damage to the finish, such as scratches, dents, discoloration, rust or other weather damage,
after purchase.
This Limited Warranty is in lieu of all other express warranties. Vendor disclaims all warranties
for products that are purchased from sellers other than authorized retailers or distributors,
including the warranty of merchantability or the warranty of fitness for a particular purpose.
VENDOR ALSO DISCLAIMS AND ANY ALL IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. VENDOR SHALL NO LIABILITY TO PURCHASER OR ANY THIRD PARTY FOR ANY
SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Vendor further
disclaims any implied or express warranty of, and assumes no responsibility for, defects in
workmanship caused by third parties.
This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other
rights depending upon where he or she lives. Some jurisdictions do not allow the exclusion or
limitation of special, incidental or consequential damages, or limitations on how long a warranty
lasts, so the above exclusion and limitations may not apply to everyone.
Vendor does not authorize any person or company to assume for it any other obligation or
liability in connection with the sale, installation, use, removal, return, or replacement of its
equipment, and no such representations are binding on Vendor.
Blue Rhino Global Sourcing, Inc
Winston-Salem, North Carolina USA
1.888.753.7137
Figure 5
Cleaning and Care (continued)

Outdoor LP Gas Mosquito Exterminator Model No. SV5100 Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
Troubleshooting
Problem Possible Cause Solution
SkeeterVac®does not start
LP gas tank is low or empty Replace LP gas tank
LP gas leak Follow “Checking for Leaks” instructions.
Igniter does not work
1. Turn off LP gas tank per “Turning Off” section.
2. Press the igniter button (see figure 4)
a. If hear clicking sound, igniter is working.
b. If do not hear clicking sound replace battery. If still not working call our Customer Care at
1.888.753.7137
Too much air in hose line
1. Connect LP gas tank per “Connecting LP Gas Tank” instructions.
Caution: Keep this appliance area clear and free from combustible
materials, gasoline, other flammable vapors and liquids and open flames.
2. Turn LP gas tank valve slowly to ‘’OPEN’’
3. Press and hold control valve button for up to 3 minutes.
4. Try and light SkeeterVac®per “Lighting Instructions” every 30 seconds until you hear a “POP”
sound indicating ignition.
5. If still not working refer to “Regulator needs to be reset”.
Filter blocked
1. Turn off LP gas tank per “Turning Off” instructions.
2. Disconnect LP gas tank per “Disconnect LP Gas Tank” instructions.
3. Remove Regulator/Hose Assembly at SkeeterVac®engine.
4. Remove filter.
5. Reconnect Regulator/Hose Assembly at SkeeterVac®engine.
6. Perform leak check per “Checking for Leaks” instructions.
7. Light SkeeterVac®per “Lighting Instructions”.
Regulator needs to be reset
1. Turn off LP gas tank per “Turning Off” instructions.
2. Disconnect LP gas tank per “Disconnect LP Gas Tank” section.
3. After 30 seconds, reconnect LP gas tank per “Connect LP Gas Tank” instructions.
4. Slowly turn LP gas tank valve to “OPEN”.
5. Perform leak check per “Checking for Leaks” instructions.
6. Light SkeeterVac per “Lighting Instructions”.
Too damp or wet
1. Connect LP gas tank per “Connecting LP Gas Tank” instructions.
Caution: Keep this appliance area clear and free from combustible
materials, gasoline, other flammable vapors and liquids and open flames.
2. Turn LP gas tank valve slowly to ‘’OPEN’’
3. Press and hold control valve button and igniter button for up to 3 minutes or until the needle on
the engine gauge should begin to move into the “Green” zone, the LED lights will be flickering
and the vacuum fan will be running with air flow out of the engine bottom, indicating ignition is
complete.
5. If still not working refer to “Regulator needs to be reset”.
Engine not functioning properly
LP gas tank is low or empty Replace LP gas tank
LP gas leak Follow “Checking for Leaks” instructions.
Ventilation blocked
1. Turn off LP gas tank per “Turning Off” instructions.
2. Disconnect LP gas tank per “Disconnect LP Gas Tank” instructions.
3. Check ventilation openings and air-inlet to make sure clear of debris.
4. Clean SkeeterVac per “Clean and Care” Instructions.
Fan not working
1. Verify the SkeeterVac®has been running for at least 10 minutes.
2. Use a pencil and slowly turn fan blades.
a. If fan blade continue to turn on their own, allow SkeeterVac to continue to run.
b. If fan blade stop, turn off LP gas tank per “Turning Off” Instructions and clean SkeeterVac®.
Clean SkeeterVac®per “Clean and Care” Instructions.
SkeeterVac®turns off suddenly
Out of gas Replace LP gas tank
Overheat protection switch (heat sensor)
turned ON
1. Turn off LP gas tank per “Turning Off” instructions.
2. Disconnect LP gas tank per “Disconnect LP Gas Tank” instructions.
3. Let engine cool for 30-45 minutes.
4. Connect LP gas tank per “Connect LP Gas Tank” instructions.
5. Light SkeeterVac®per “Lighting Instructions”.
6. After 5 minutes of operation, verify LED lights and fan are working properly.
For more assistance please visit us online at www.bluerhino.com or call 1.888.753.7137.

Contact 1.888.753.7137 for assistance. Do not return to place of purchase.
page no.
11

Outdoor LP Gas Mosquito Exterminator Model No. SV5100