Skimz BR83 User manual

BIOPELLET REACTOR
QUICK INSTALLATION GUIDE
BR83
Thank you for purchasing your new SKIMZ Biopellet Reactor that provides optimum performance with
maximum safety and reliability.
MAINTENANCE
It is recommended to clean the reactor when new media is replaced. The feed pump, reactor and sponges
should be cleaned to ensure that it does not blocked with debris from the tank or calcium deposits.
WARRANTY POLICY
Skimz Singapore LLP (Company) warrants this product to the original purchaser against defective material
and workmanship that occurs during normal use of the body for two (2) years and one (1) year warranty on
the pump. Company will, at Company’s option, either repair or replace without charge.
PRODUCTS COVERED BY WARRANTY
All Skimz equipment is covered by warranty from the date of purchase.
To be eective, register your product at: www.skimz.sg, product warranty within 14 days of the product’s
purchase date.
Exclusions:
Damage resulting from accident, misuse, lack of reasonable care, subjecting the product to abnormal working
conditions or any other failure not resulting from defects in materials or workmanship.
Damage caused by tampering, modication or attempted repair by anyone other than the Company.
Transfer of product to someone other than the original purchaser.
Bring the product to your nearest Skimz dealer or ship the product, together with a copy of the purchase
receipt or other evidence of purchase to:
Skimz Singapore LLP
5 Ang Mo Kio Industrial Park 2A
#04-30 AMK Tech II
Singapore 567760
You must pay any postage, shipping charges, insurance costs and other expenses to return the product to
Skimz. However, if the necessary repairs are covered by the warranty, Company will pay the return shipping
charges.
8070-18 © 2014 Skimz
Model Feed Pump Body
Diameter (mm)
Biopellet
Media For Aquarium
BR83
BR103
BR153
WP-VSC1200DC
WP-VSC2000DC
WP-VSC3000DC
80
100
150
up to 400ml
up to 1,000ml
up to 2,000ml
up to 400 L
up to 1,000 L
up to 2,000 L
Code
8206-00
8208-00
8210-00

A. Thumbscrew
B. Mounting bracket
C. Reactor media
D. Dispersion cone
E. Feed pump
F. Outlet hose
G. Sponge (only when using it as uidized reactor)
skimz.sg | [email protected] skimz.sg | [email protected]
1. Open the lid by removing the thumbscrews.
2. Fill the reactor with required volume of media and reattach
the coupling.
STEP 1
1. Attach the exible hose to outlet of the reactor.
2. Connect the feed pump to inlet of the reactor.
STEP 2
1. Position the reactor inside the aquarium or sump.
2. Switch on the feed pump and adjust the ow rate until all
the media is tumbling, so that it will keep the media free of
biolm.
STEP 4
When using BR100 as uidized Reactor
1.
Inset one sponge at bottom and one at the top inside the
cylinder body.
2. It can be used with phosphate media or activated carbon.
3. Switch on the feed pump and adjust the ow rate until the
media starts to uidize.
4. When uidizing media, we suggest that the ow must not
be too strong to avoid media disintegration. A general guide
is to provide sucient ow such that the surface of the media
are moving gently.
STEP 5
1. BR80 can be used inside the aquarium or in-sump.
2. It comes with two holding systems for individual xing, and
is adjustable in height.
3. Remove the (a) screw and turn the (b) xing bracket.
STEP 3