Skullduggery Maxx Traxxx Tracer Racers Showdown Set User manual

Ford Trademarks and Trade Dress used under license to Skullduggery, Inc.
General Motors Trademarks used under license to Skullduggery, Inc.
99-171104-34975
THe Showdown set / juego de persecución policial
CUSTOMER INFORMATION
Skullduggery, Inc. • 5433 East La Palma Ave. • Anaheim, CA 92807
We guarantee the quality of all Skullduggery products. If this product
does not perform properly, please contact us. In the USA call
[phone] M-F 8AM - 4PM Pacific time. International call
[phone]. www.skullduggery.com • © 2016 Skullduggery, Inc.
Max Traxxx® is a registered trademark of Skullduggery, Inc.
Patent Pending.
Conforms to ASTM F963
Non-Toxic, Ages 6 & up
TRACER RACERS
light trace
technology
featuring
REMOTE CONTROL
patent pending
trouble shooting
1. If the RC Racer only works sporadically, try one or both of the
following:
a. Point the controller at the Racer as it zooms around the track.
b. Take a step or two back from the track so the infrared signal has a
wider coverage angle. You can then experiment with standing
different distances from the track to find the optimum distance to
angle ratio.
2. If the RC Racer flies off the corners regularly, try the following:
a. Make sure the track and the corner connectors are fit snuggly
together. You will have control issues if one of the connectors is only
partially connected.
b. Utilize the variable control function on the controller (ease up on the
trigger) to slow the Racer down when traveling through a corner.
3. If Racers are not charging enough to hit top speeds, then replace
the AA batteries in the controllers to ensure adequate vehicle
charging.
4. If Racers are not making it all the way through a loop make sure
you start them no closer than 12 – 18 inches from the loop. This
will create the speed and momentum necessary to make it fully
through the loop.
5. Warning: Be careful operating vehicles on surfaces that contain
loose fibers (such as hair or deep carpet) as the fibers can get caught
around the wheels and axels and prevent tire rotation.
6. Warning: Do not expose glow-in-the-dark track to direct sunlight as
this will adversely affect the tracks glow capabilities.
7. Tracer Racers RC Sets currently possess 8 different racers with
4 unique frequencies:
IMPORTANT - DO NOT RETURN PRODUCT
We’re here to help!
Call us @ 800.336.7745
Monday thru Friday between 8:00 am - 5:00 pm (pacific)
ADVERTENCIA:
PELIGRO DE ASFIXIA —Contiene piezas pequeñas.
No conveniente para niños menores de 3 años.
!
Includes:
Compatible with major brands
REMOTE CONTROL
DUAL LANE RACING
Skullduggery guarantees your 100% satisfaction with this product.
If you have any issues that are not addressed in this instruction
booklet, please call us at 800.336.7745.
OVEROVER
#098220
IMPORTANT: PLEASE RETAIN PACKAGING FOR FUTURE REFERENCE

BATTERY
INSTALLATION
x-blox assembly
Read and follow operating instructions.
1. Do not mix old and new batteries.
2. Do not mix alkaline, standard (carbon-zinc), or rechargeable (Nickel-cadmium)
batteries.
3. Only batteries of the same or equivalent type as recommended are to be used.
4. Batteries are to be inserted with the correct polarity.
5. Exhausted batteries are to be removed from the product.
6. The supply terminals are not to be short-circuited.
7. Non-rechargeable batteries are not to be recharged.
8. Rechargeable batteries are to be removed from the product before being charged (if removable)
9. Rechargeable batteries are only to be charged under adult supervision.
10. Dispose of batteries safely.
11. Do not dispose of this product in a fire. The batteries inside may explode or leak.
12. Batteries should be changed by adults only.
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Effective signal range: 40 feet or 12 meters.
**This device and its antenna must not be co-located or operating in conjunction with any other antenna
or transmitter.
This Class B digital apparatus complies with Canadian ICES-003. Conforms to ASTM F963 standard.
Contents and color may vary slightly from these shown. Please retain packaging for future reference.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
PRECAUCIÓN: Los cambios o modificaciones que se hagan a este aparato que no sean expresa-
mente aprobados por la parte responsable del cumplimiento podrían anular la autoridad del usuario
para operar el equipo.
OBSERVACIÓN: Este dispositivo ha sido probado y cumple con los límites para un dispositivo digital
de Clase B, de acuerdo con la Parte 15 de los reglamentos de la Comisión Federal de Comunicaciones
(FCC). Estos límites están diseñados para proporcionar una protección razonable contra interferencias
peligrosas en una instalación residencial. Este equipo genera, utiliza y puede irradiar energía de
radiofrecuencia y, si no se instala y se utiliza de acuerdo con las instrucciones, puede causar
interferencias en las comunicaciones de radio.
Sin embargo, no hay garantía de que no se produzcan interferencias en una instalación específica. Si
este equipo causa interferencias adversas en la recepción de radio o televisión, lo cual puede
comprobarse encendiéndolo y apagándolo, se recomienda al usuario que intente corregir la interferen-
cia mediante una o más de las siguientes medidas:
- Vuelva a orientar o a ubicar la antena receptora.
- Aumente la distancia de separación entre el equipo y el receptor.
- Conecte el equipo a una toma eléctrica que esté en un circuito que no sea en el que está conectado
el receptor.
- Consulte a su distribuidor o a un técnico de radio/televisión con experiencia para obtener ayuda.
Alcance operante de la señal: 40 pies o 12 metros.
** Este dispositivo y su antena no deben colocarse ni operarse junto con otra antena o transmisor.
Este aparato digital Clase B cumple con la norma ICES-003 de Canadá. El contenido y los colores
pueden ser ligeramente de los que se muestran. Cumple con la norma ASTM F963.
Guarde el empaque para futuras referencias.
GENERAL BATTERY INFORMATION
IMPORTANT
X-BLOX
BASE PLATE
HINGES
RISERS
TRACK
Hint: Try to master a short jump prior
to setting up for longer jumps. Drivers
need to slow down at the correct time
in order to regularly complete the
jump successfully.
Riser plate slides
into the track grooves
STEP A
1. Unscrew battery door on handle
2. Remove battery door from handle
STEP B
1. Insert batteries as shown in diagram
2. Replace battery door on handle
phillips head
screwdriver
A
A B
B
AA LR6 (1.5V) AA LR6 (1.5V)
AA LR6 (1.5V) AA LR6 (1.5V)
battery compartment battery compartment (open)
1.5v (LR-44) batteries
battery cover
phillips head
screwdriver
NOTE:
Each controller
requires 4 AA/LR6
(1.5V) batteries
(not included)
NOTE:
Lap counter
requires 3 (LR-44)
(1.5V) batteries
(included)
DIGITAL LAP COUNTER

ON 01
ON OFF ON OFF
ON
ON OFF
ONOFF/CHARGE
CHARGE
FORWARD / REVERSE
01
OFF/CHARGE
ON
CHARGE
Red Light will flash while charging.
Green light will appear once charging
is complete. You’re ready to race.
01
PLUG CHARGER
CORD INTO CAR
ON OFF
ON
ON
ON
Unplug power cord and turn vehicle
and controller to the ON position.
When not in use, turn OFF
controller and vehicle. Car
clips to the top of the
controller for easy storage.
01
FUNCTIONS
CHARGE
RACE
STORAGE
basic operation
Point controller directly at car while depressing
trigger for optimal performance
I.R. Function
ON 0 1 ON 0 1
performance tip
Contents
TRACK CURVE (right) X 8
TRACK CURVE (left) X 8
12” TRACK X 4
24” TRACK X 10
CONTROLLER 1
TRACK RISER X 2
X-BLOX X 45
HINGE X 4
LANE CHANGER X 2
BASE PLATE X 2
6” TRACK X 4
16” TRACK X 2
LOOP TRACK X 2
ON 01 ON 01
CONTROLLER 2
ON 01 ON 01
VEHICLE 1
VEHICLE 2TRACK
CONNECTOR X 8
NOTE:
Both the racers and the controllers
have a built in sleep mode. If you leave
either one on, but do not utilize for 30
minutes, the power will automatically
turn off. To reactivate, simply turn
racer and/or controller off and then
back on again, and you are ready to
race.
LOOP BASE X 2
DIGITAL
LAP COUNTER X 1

TRACK ASSEMBLY
NOTE: Make sure all track pieces are
firmly connected to ensure maximum
performance.
TIP: For easier assembly connect
track pieces side by side, first as shown
in illustration.
SLIDE OR SNAP TRACKS SIDE BY
SIDE TO CREATE TWO LANES.
Variable Speed Challenge: Add X-BLOX Construction
Brix to prop up corners and straightaways to increase
maneuvering difficulty
base plate
base plate
track corner
lane changer
lane changer
16in.
riser
hinges
X-Blox
X-Blox
X-Blox
X-Blox
X-Blox
loop track
LOOP BASE
no holes
track corner
track corner track corner
track corner
track corner
track corner
track connectors
track corner
2ft.
2ft.
2ft.
2ft.
2ft.
6in.
6in.
1ft.