Sky Wing 120E/35CC User manual

WWW.SKYWING-RC.COM
Assembly manual
Product CG point at the center of the wing tube
Please carefully check the installation
manual before assembly, and then
carry out the installation work!
If you have any questions during the installation process,please
send the questions to the following email address! We will help
solve the installation problem as soon as possible!
Advice:
(120E/35CC)
(Email:[e-mail])
CG

502 glue bonding Surface roughening
Epoxy glue fixing

Epoxy glue fixing
502 glue bonding

Epoxy glue fixing
Surface roughening
Please choose to install the first screw position

Servo :Rudder/Give wing bag2.5"
Servo :Elevator/1.25" Servo :Aileron/1.25"

Install fuel tank
Install fuel point
Installation of exhaust points

If you do not choose to install a silencer,
please do not open the pipe entrance!
Install throttle servo

Please ensure the engine has good cooling vents!