SkyBound SWING SET FRAME Setup guide

ASSEMBLY AND INSTALLATION MANUAL
www.SkyBoundUSA.com
www.TrampolinePartsCenter.com
[email protected]
A PERSONAL MESSAGE FROM OUR FOUNDER
2022 BX International Inc – ALL RIGHTS RESERVED

IMPORTANT INFORMATION
WARNING
!
ASSEMBLY INSTRUCTIONS
STEP 1
7
Attach frame tube (4, 5, 6) and
fixed by bolt (8, 9, 10).
STEP 2
Attach frame tubes to X-Frame
and insert hardware (8, 9, 10) as
shown in the figure.
This object is subject to wear and tear. No warranties whether expressed or implied
are provided.
Injury will likely occur with the use of a trampoline or any associated product.
Use with supervision.Use at your own risk.
Only Use in a well-lit, well secured down area.
NO.
1
0
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
1
1
1
4
4
4
4
4
1
1
1
1
Part Name
Wrench
M10 Wrench
L Shaped Wrench
Frame Foot
Bottom Feet Tube
Middle Frame Tube
Upper Frame Tube
X-Frame
Pictures Quantity
12
12
12
Bolt
M8 Washer
M8 Spring Washer
M10 Nut
M10 Washer
M10 Ring Bolt
Carabiner
Rope
INSTALLATION STEPS OF SWING SET FRAME

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
[phone]
SkyBound Customer Service
[email protected]
SkyBoundUSA.com
STEP 3
Installation completion drawing
Fix the ring bolt (13) and carebiner
(14) on the top.
INSTALLATION STEPS OF SWING SET FRAMEINSTALLATION STEPS OF SWING SET FRAME
STEP 4
Fix the nut (a, b) to the rope
(15) on the feet.
SkyBound, a BX International Inc Company.
SkyBound is a registered trademark of BX International Inc.
in the U.S. and other countries. All logos, names,
characters, likenesses, images, slogans and
packaging appearance are the property of SkyBound.