Skycoin Skywire Miner User manual

Assembly
Manual
SkywireMiner
Contact
Address
#1101 SouthTower,
No.1839QixinRoad,
Minhang,Shanghai,P.R.C
Website
www.skycoin.net
Email
[e-mail]

SKYWIRE MINER
OVERVIEW 01

ASSEMBLY MANUAL
CONTENTS
02
FOREWORD
SCREWS AND PARTS
FRAME ASSEMBLY
ELECTRONIC ASSEMBLY
FINAL ASSEMBLY
CABLE CONNECTION
03
07
08
11
20
27

WARRANTY
FOREWORD
03
Introduction
Skywire Miner is groundbreaking technology that redirects the control of large Internet
service providers (ISPs) and helps individuals leverage that power. The Skywire Miner
peer-to-peer model promotes net neutrality and content sharing, without imposing any
blocking, performance decrease, or censorship. Skywire Miner is built with an open-
access network than ensures privacy and encourages free speech. Our mission in creat-
ing Skywire is to shape the future of the Internet for the better.
Our revolutionary networking protocol is already changing the Internet as we know it. The
protocol is based on Multi-Protocol Label Switching (MPLS), which includes benefits of
higher performance, better quality of service, more reliability, and greater security. Sky-
wire Miner goes well beyond these standards to deliver an even faster network that is opti-
mized for high performance and maximum privacy. A user can bypass the ISPs and main-
tain control of their Internet access experience — effectively operating as an independent
ISP.
Warranty
Thank you for your interest and trust in the Skywire Miner.
In using the product, you are obliged to install and operate the Skywire Miner according to
the safety instructions, warnings, specification sheet, and assembly manual — as well as
common sense. Otherwise, the Skycoin team won’t be responsible for any property
losses or personal injuries caused by failure to understand the proper use of the product.
Since this is the first version of the Skywire Miner — built especially for early-adopter
customers — you may face an unexpected situation. We appreciate your patience in deal-
ing with such scenarios. The Skycoin team stands ready to help, and remains willing to
offer the most appropriate solution to address any product defect. This includes a warran-
ty that covers, as necessary, free repair, replacement of parts*, or replacement of the
entire product.
Warranty terms: This manufacturer warranty covers any defects in material or workman-
ship that may occur under normal use within a period of one (1) year from the purchase
date. When you discover any defects with the Skywire Miner, stop all operation and con-
tact the Skycoin team immediately to obtain warranty coverage. You may reach the Sky-
coin team here at: [email protected]
Exclusions: There is absolutely no coverage for accidents, fire, or water damage, acts of
nature or external forces, or damage caused by repairs, unauthorized upgrade attempts,
or removal of components. This warranty does not cover cosmetic damage. This warranty
does not apply to products that have been lost, altered, broken or damaged by misuse or

SAFETY
FOREWORD
04
failure to follow instructions provided with the product. Also, there is no warranty against
normal wear.
Remedy terms: At its discretion, Skycoin will make remedy through replacement or repair
of defects—in either materials and or workmanship. Return shipping costs are the respon-
sibility of the original purchaser.
Warranty period: All warranty claims must be reported to the manufacturer during the
one year warranty period from the date of purchase to be eligible for coverage.
Safety
It’s important that you assemble and operate this product and all components in strict
accordance with the instructions in this manual.
Handling circuit boards — Exercise extreme caution while handling printed circuit
boards (PCBs) to avoid mechanical or electrical damage. Only handle the PCBs by the
edges, to minimize the risk of electrostatic discharge damage.
Proper voltage — Before connecting the power cord, ensure that you switch to the
correct input range on the power supply unit that corresponds to the voltage that your
electrical outlet provides.
Firm connections — Before powering up the Skywire Miner, ensure that all connections
are secure for all components, and confirm that there are no loose screws or loose com-
ponents anywhere within the Skywire Miner unit. Do not connect any devices to the Sky-
wire Miner that are not included in this package.
Precautions — take time to consider situations that may be dangerous or cause damage:
• During operation, do not expose Skywire Miner to water or moisture.
• Do not expose Skywire Miner to heat from any source. This appliance is designed
for reliable operation at normal ambient room temperatures.
• Do not tug in the middle of the power supply cable to unplug the unit. Unplug the
Skywire Miner from the end of the cable, where the plug inserts into the socket.
• Place Skywire Miner where the power cord has adequate slack to safely connect
the Skywire Miner to the power supply socket.
• Place the power cord in such a way that people cannot step on it. Do not place any-
thing over the power cord.

WARNING
FOREWORD
05
If any of the following situations occur, stop using the Skywire Miner immediately and con-
tact support to make arrangements to check your unit:
• Liquid has penetrated into the Skywire Miner.
• The Skywire Miner has been exposed to moisture or heat.
• The Skywire Miner does not work well, or it does not function according to the
content in the user guide.
• The Skywire Miner has been dropped and damaged.
• The Skywire Miner has obvious breakage.
Warning!
• Always unplug the power cord from the power outlet before installing any compo-
nent into this appliance or removing anything from this appliance.
• When the power is on, do not contact any conductive objects with any Skywire
Miner components.
• Do not touch the Skywire Miner with any wet part of your body, and do not oper-
ate the Skywire Miner while barefoot.
• The Skywire Miner is not intended for use by children. Nor is it intended for use
by persons that exhibit any physical, sensory, or mental impairment, or persons lacking
experience and knowledge of the Skywire Miner—unless supervised or previously
instructed in its use by those responsible for their safety.

SPECIFICATION
FOREWORD
06
Computing
Network
Electrical
Environmental
Net Weight
Chassis Demensions (LxWxH)
Shipping Weight
Shipping Dimensions (LxWxH)
Structure Materials
Computing Unit Quantity
CPU Model
Computing Core Quantity
GPU Model
RAM (Shared with G-RAM)
Storage
LAN Bandwidth
LAN Ethernet Cable Type
AC Input Voltage
AC Input Frequency
Max Input Current
Max Inrush Current
Fuse Current
Backup Fuse
Input Plug Type
Power Cord Standard
Power Connector Type
Working Temperature
Working Humidity
Storage Temperature
Storage Humidity
NEMA 5-15 or
GB1002-2008 1-Phase 2-Pole Earthed
4 kg (9 lbs)
235x235x275 mm (9.5x9.5x11 inch)
4.5kg (10 lbs)
320x320x190 mm (12.5x12.5x7.5 inch)
Aluminum Alloy & Acrylic
8
ARM Cortex™-A53
32
Hexa-core Mali450
16GB (32 x 512MB DDR3)
8 x 16GB Class-10 A1 Micro SD
8 x 100Mbps
CAT-6
85~132V / 170~264V
47~63Hz
2.4A @115V AC / 1.2A @ 230V AC
30A @115V AC / 60A @230V AC
3A
Included
IEC 60320 C14
GB/T 5023.3-2008
-10°C~40°C(14°F~104°F)
20%~90% RH
-20°C~60°C (-4°F~140°F)
10%~95% RH
Specification Sheet of Skywire Miner
Build 2.0
Physical

SCREWS & PARTS
SCREWS AND PARTS
0310
20x
0302
8x
0312
8x
0510
12x
0406
4x
0303
10x
3216
8x
MICRO SDCARD
1028
26x
0402
4x
0336
24x
0326
8x
0320
8x
0502
64x
07
0508
52x

STEP 01
FRAME ASSEMBLY
1194 Shorter Aluminum Profile
0508 M5x8mm Hex Screw
0502 M5 T-Nut
1028 Corner Bracket
1028
2x
0502
2x 2x
08
9930
0508

STEP 02
FRAME ASSEMBLY
1234 Longer Aluminum Profile
0508 M5x8mm Hex Screw
0502 M5 T-Nut
09
0502
6x 6x
9930
0508

06
STEP 03
FRAME ASSEMBLY
1234 Longer Aluminum Profile
0508 M5x8mm Hex Screw
0502 M5 T-Nut
1028 Corner Bracket
1028
8x
0502
16x 16x
10
9930
0508

STEP 04
ELECTRONIC ASSEMBLY
2002 Acrylic Inner Plate 5mm
0310 M3x10mm Hex Screw
0320 20mm F-F Spacer
11
0320
8x
0310
8x
9925 9805

5011 Power Supply Unit
0310 M3x10mm Hex Screw
0303 M3 Nylon Spacer
STEP 05
ELECTRONIC ASSEMBLY 12
0310
4x
0303
4x
9925

STEP 06
ELECTRONIC ASSEMBLY
4100 Orange Pi Prime
0336 30mm F-M Spacer
13
0336
24x
9805

STEP 07
ELECTRONIC ASSEMBLY
2003 Acrylic Outer Plate 5mm
4100 Orange Pi Prime
0310 M3x10mm Hex Screw
0326 20mm F-M Spacer
14
0326
8x
0310
8x
9925 9805

11
STEP 08
ELECTRONIC ASSEMBLY
2001 Acrylic Back Plate 5mm
5001 Power Socket
0312 M3x12mm Hex Screw
0302 M3 Nut
0302
2x
0312
2x
15
9925

0312
6x
0510
2x
0502
2x
0303
6x
0302
6x
STEP 09
ELECTRONIC ASSEMBLY 16
5020 Power Distribution Board
0312 M3x12mm Hex Screw
0510 M5x10mm Hex Screw
0303 M3 Nylon Spacer
0302 M3 Nut
0502 M5 T-Nut
9930 9925

STEP 10
CABLE CONNECTION
7010 Cable
7011 Cable
7012 Cable
7013 Cable
7014 Cable
7020 Cable
7021 Cable
7022 Cable
7024 Cable
17
7010 7010 7010 7010
7010 7010 7010 7010
7013 7014
7024
7011 7020
7021 7022
7012

13
STEP 11
ELECTRONIC ASSEMBLY 18

STEP 12
ELECTRONIC ASSEMBLY
0510 M5x10mm Hex Screw
0502 M5 T-Nut
19
0510
2x
0502
2x
9930