skywalker sports ActivPlay SJG205 Quick guide

USER MANUAL
Skywalker Holdings LLC
P.O. Box 574, Brigham City, UT 84302
ASSEMBLY, MAINTENANCE, &
MODEL # SJG205
WARNING
Read the assembly, installation, care, maintenance, and use
instructions in this manual prior to assembling and using this
equipment. Save this manual for future reference.
Ages: 4-8
Maximum occupancy: 1 user
Maximum weight: 81 lbs

TABLE OF CONTENTS
2
WARNING
CHOKING HAZARD- Small
parts not for children
under 3 years.
WARNING
Adult assembly required.
STOP EVERYTHING YOU'RE DOING AND REGISTER YOUR PRODUCT
Find our warranty registration online by typing in: www.skywalkertrampolines.com/registration/
You'll need to have the following information handy:
• Name • Email address
• Address • Product model number
• Phone number • Product serial number
• Date of purchase • Retailer the product was purchased from
Part List.....................................................................................................................................................................................3
Part Identification........................................................................................................................................................4-5
Exploded Drawing.............................................................................................................................................................6
Assembly.............................................................................................................................................................................7-11
Installation.............................................................................................................................................................................12
Maintenance & Care Information..........................................................................................................................13
Jungle Gym Safety information.............................................................................................................................14
Instructions for Use.......................................................................................................................................................15
Warning Label Placement.........................................................................................................................................16
Playground Surfacing Materials Information...............................................................................................17
Limited Warranty...............................................................................................................................................................18
HEY WE'VE GOT SOMETHING REALLY IMPORTANT TO SAY
ActivPlay belongs to a family of brands focused on providing active products. Check us out online! We've got assembly videos
(for those of you who prefer movies over books), FAQs (so you know you're not the only one who needs help) , additional
products (including trampolines, sports, fitness, and playground equipment), and most importantly, find us on social media!
Because we want to be your friend. We'd love to see how you are using our products!
@skywalkertrampolines skywalkertrampolines @skywalker_trampolines
@swtrampolines @swtrampolines www.skywalkertrampolines.com

PART LIST
ORDERING REPLACEMENT PARTS
We get it, sometimes things happen, but the fun shouldn’t stop just because you need a new bolt or screw. To order
replacement parts, check out our website at: www.skywalkertrampolines.com or call our toll-free Customer Care
Hotline at 1-866-603-Jump (5867), Monday to Thursday 8 a.m. to 5 p.m., Friday 8 a.m. to 3 p.m. (excluding holidays).
Our customer service team will ask you a few questions in order to get the replacement part sent out as soon as
possible. We’re not trying to complicate your life, we promise.
When calling, make sure to have the following information ready:
• The model # of the product (see the front cover of this manual)
• The key # and description of the part (see the part list above)
• The quantity of parts needed (only you know the answer to that one)
BEFORE YOU BEGIN
Thanks for choosing ActivPlay! We’re just as excited as you are to help your family live an active (but most
importantly FUN) lifestyle. This model is one of our favorites, and we’re confident you’ll love it too. To make things
easier for you, we’ve listed important information that you need to know. Make sure you brush up on the warnings,
instructions, assembly, maintenance, and use of your new product, because there will be a pop quiz at the end
(Okay, not REALLY, but if you’re still reading this, props to you! You’re awesome.).
3
Key No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
#
Description
Bottom Frame 1
Bottom Frame 2
Top Frame 1
Top Frame 2
Cross Bar
Upright Bars
M8 Arc Washer
M8x35mm Button Bolt
M8X20mm Button Bolt
M6 Locknut
M8 Washer
D50 Inner Cap
Plastic Protector
M6 Washer
M6x40mm Button Bolt
Wrench
4mm Hex key
5mm Hex key
User’s Manual
Qty.
1
1
1
1
9
2
38
18
24
18
4
2
18
18
18
1
1
1
1

4
Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares
to the left (key numbers) will help you identify the parts during assembly.
PART IDENTIFICATION
D50 Inner Cap
(x2)
1 2 3
456
78
Bottom Frame 1
(x1)
9
10 11 12
Bottom Frame 2
(x1)
Top Frame 1
(x1)
Top Frame 2
(x1)
Cross Bar
(x9)
M8 Washer
(x4)
M8X20mm Button
Bolt (x24)
M6 Locknut
(x18)
M8 Arc Washer
(x38)
Upright Bars
(x2)
M8X35mm Button
Bolt (x18)

5
13 14
4mm Hex Key
(x1)
15
17 18
16
M6x40mm Button
Bolt (x18)
5mm Hex Key
(x1)
Plastic
Protector (x18)
Wrench (x1)
M6 Washer
(x18)

EXPLODED DRAWING
6
(13)
(2)
(4)
(3)
(1)
(15)
(14)
(10)
(5)
(5)
(5)
(5)
(5)
(7)(8)
(7)(8)
(7)(8)
(7)(8)
(7)(8)
(7)
(8)
(7)
(8)
(7)
(8)
(7)
(8)
(7)
(8)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(13)
(5)
(5)
(5)
(5)
(7)(8)
(7)(8)
(7)(8)
(7)
(8)
(7)
(8)
(7)
(8)
(7)
(8) (7)
(9)
(12)
(12)
(6)
(6)
(7) (9)
(7)
(7)
(9) (9) (7)
(9)
(7)
(9)
(9)
(9)
(7)
(11)
(9)
(9)(7)
(11)
(9)
(7)(7)
(7)
(7)
(9)
(9)

ASSEMBLY
7
STEP 1
Register your Arched Ladder Climber Accessory! For info on warranty registration, see page 2.
READ THIS BEFORE YOU BEGIN
• We’ve provided some tools to help with assembly, but you’re more than welcome to use your own
• The assembly steps refer to parts by their descriptions and key numbers (see the part list on page 3)
• The assembly steps are written in a specific order, and if you don’t follow them exactly, you may end up having to
start all over again
• Most importantly, this may not be the easiest thing you’ve ever done, but it will be worth it. Trust us
And if you are a visual learner, check out our assembly videos. They’re pretty great!
STEP 2
Cross
Bar
(x10)
5
(5)
Plastic
Protector
(x18]
13 M6X40mm
Button Bolt
(x18)
15 M6 Washer
(x18)
14 M6
Locknut
(x18)
10
To begin, slide the narrow end of two plastic
protectors (13) onto the ends of a cross
bar (5). Secure with two M6X40mm button
bolts (15), two M6 washers (14) and two
M6 locknuts (10). Repeat this step until all
remaining cross bars and plastic protectors
are assembled.
Do not fully tighten the locknuts.
(13)
(13)
(15)
(15)
(14)
(14)
(10)
(10)
skywalkertrampolines

8
ASSEMBLY
STEP 3 Now, place the bottom frame 1 (1) and bottom frame 2 (2)
onto the ground as shown. Insert one end of a cross bar
(5) from previous step into the bottom frame 1 (1). Insert
the other end of the cross bar (5) into the bottom frame
2 (2). Secure with M8X35 mm button bolts (8) and M8 arc
washers (7). Repeat until five cross bars have been placed.
Do not fully tighten the bolts.
M8X35mm
Button Bolt
(x10)
8
M8 Arc
Washer
(x10)
7
Bottom
Frame 1
(x1)
12Bottom
Frame 2
(x1)
STEP 4
(5)
(5)
(5)
(5)
(5)
(1)
(2)
(8) (7)
(8) (7)
(8) (7)
(8) (7)
(8) (7)
(8)
(7)
(8)(7)
(8)
(7)
(8)(7)
(8)(7)
Place the top frame 1 (3) and top frame 2 (4) on the
ground as shown. Attach a cross bar (5) to
the top frame 1 (3) and top frame 2 (4) in the same
manner as step 3. Secure with M8 arc washers (7) and
M8X35 mm button bolts (8). Repeat until the remaining
five cross bars have been placed.
Do not fully tighten the bolts.
M8X35mm
Button Bolt
(x8)
8
M8 Arc
Washer
(x8)
7
Top Frame
1 (x1)
34Top Frame
2 (x1)
(3)
(4)
(5)
(5)
(5)
(5)
(8) (7)
(8) (7)
(8) (7)
(8) (7)
(8)
(7)
(8)
(7)
(8)
(7)
(8)
(7)

9
STEP 6 Attach the two upright bars (6) to the free ends of the
top frame 1 (3) and the top frame 2 (4). Secure in place
with eight M8 arc washers (7) and eight M8 X20mm
button bolts (9).
Do not fully tighten the bolts.
STEP 5
7
4
Insert the male ends of the top frame 1 (3) and top frame
2 (4) into the female ends of the bottom frame 1 (1) and
bottom frame 2 (2). Secure the two pieces together with
the M8 arc washers (7) and the M8X20mm button bolts
(9).
Do not fully tighten the bolts.
M8 Arc
Washer (x8)
7
M8X20mm
Button Bolt
(x8)
M8 Arc
Washer (x8)
9 7
(7)
(7)
(7)
(7)
(7)
(7)
(7)
(7) (9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(1)
(2)
(3)
(4)
M8X20mm
Button Bolt
(x8)
9
Upright bar
(x2)
6
(6)
(6)
(7)
(9)
(9) (7)
(7)
(7)
(9)
(9)
(9)
(9)
(9)
(9)
(7)
(7) (7)
(7)
(3)
(4)

10
ASSEMBLY
STEP 7 Remove the two plastic caps from the Jungle Gym Base.
Insert the upright bars (1) into the now open poles of the
Jungle Gym Base. Secure with four M8 arc washers (7), four
M8 washers (11), and eight M8X20mm button bolts (9).
Now Tighten all Nuts and Bolts .
That’s it you’re done!
STEP 8
Congratulations on completing your Arched Ladder Climber! (See, we knew you could do it!) If you love the
product, we want to hear from you! Please leave us a review on the retailer’s site you purchased this product
from, on our Facebook page, or on any other review site. We’d really appreciate it. If we could, we’d give you a
gold star.
Are you frustrated or have some suggestions? Contact us directly. We promise we’re not trying to ruin your
life. We will do everything we can to make it right. See contact info on page 2-3.
M8X20mm
Button Bolt
(x8) 11
M8 Arc
Washer (x4)
9 7 M8 Washer
(x2)
(6)
(6)
(9)
(7)
(7) (9)
(9)
(9) (11)
(11)
(11)
(11)
(9)(7)
(7)(9)
(9)
(9)

11
STEP 9
We recommend anchoring this product to prevent tipping, overturning , or lifting of the support members.
Anchors are not provided and will need to be purchased separately. The recommended size is shown below.
To install the anchors, simply push or hammer the anchors into the ground through the holes located on
the feet at the bottom of the arched ladder climber. Be certain the anchors are placed below the level of the
playing surface or below ground to prevent tripping.
12 in. (305 mm)
1.4 in. (34mm)
.3 in. (8mm)
Anchor
Anchor

12
INSTALLATION
WARNING!
To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings
on the Jungle Gym Base Station before assembly and use of this product.
1. It is the responsibility of the owner and supervisors of this Arched Ladder Climber to make sure all users obey
the safety instructions printed in this material.
2. This product is intended for use by children ages 4-8.
3. Use the Jungle Gym only as described in this manual.
4. Always use the Jungle Gym under adult supervision.
5. Total weight capacity is 81 lbs.
6. Be sure that Jungle Gym Base Station is on a level surface, not less than 6 ft (1.8m) from any structure or
obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
7. Do not install over concrete, asphalt, packed earth, grass, carpet, or any other hard surface. The maximum fall
height for the product is 5.2 ft (1.6 m). A fall onto a hard surface can result in serious injury or death. The Jungle
Gym Base Station should never be placed on a hard surface such as concrete or asphalt.
8. It is recommended that the gym set be anchored to the ground. Be certain that all anchoring devices are placed
below the level of the playing surface or below ground to prevent tripping. Anchors are sold separately.
9. It is recommended that the Jungle Gym Base Station be placed on shock absorbing surface. Shredded bark
mulch, wood chips, fine sand or fine gravel are considered to be acceptable shock absorbing surfaces when
installed and maintained at a sufficient depth under and around Jungle Gym Base Station.
10. Do not let children use equipment until properly assembled and anchored.
11. Always inspect the Jungle Gym Base Station before it is used and replace any worn, defective, or missing parts
and tighten any bolts that have become loose. (Users may be hurt if the Jungle Gym is used when it is in poor
condition.)

MAINTENANCE & CARE INFORMATION
At the beginning of each play season:
• Tighten all hardware
• Lubricate all metallic moving parts
• Check metal parts for rust. If found, sand and repaint using a nonlead-based paint meeting the requirements
of CFR1303
• Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or
missing.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain
appropriate depth. Replace as necessary
• Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season
Twice a month during play season:
• Tighten all hardware
• Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain
appropriate depth. Replace as necessary
• Spot clean frame when dirt accumulates
Once a month during play season:
• Lubricate all metallic moving parts
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration.
Replace as needed
At the end of each play season or when the temperature drops below 32°F:
• Remove plastic swing seats and other items as specified by the manufacturer and take indoors or do not use
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain
appropriate depth. Replace as necessary
• Owners shall be responsible for maintaining the legibility of the warning labels
Disposal Instructions: If discarding, disassemble and dispose of the Jungle Gym and its Accessories in such a way
that no unreasonable hazards will exist at the time it is discarded.
If any these conditions exist, this product should be disassembled or otherwise protected from being used until the
condition is fixed.
Congratulations and high five on successfully assembling your new ActivPlay Arched Ladder Climber! Now, the best
way to keep your new Accessory in tip-top shape, is to follow this checklist periodically:
13

JUNGLE GYM SAFETY INFORMATION
A Jungle Gym is a recreational product.
The information on this manual identify important safety precautions. The precautions are not all-inclusive,
because a Jungle Gym can be used in ways that this manual cannot cover completely.
USING THE JUNGLE GYM SAFELY
Adult Supervision of Children
Children using the Jungle Gym must be supervised by adults at all times.
Adults may pay particular attention to:
• Entering and exiting the Jungle Gym safely
• Appropriate clothing, No loose-fitting clothing, scarf’s, ponchos or clothing that is potentially hazardous
• Do not attach items to the Jungle Gym that are not specifically designed for use with the equipment, such as but
not limited to, jump ropes, clothesline, pet leashes, cables, extension cords, garden hose and chains as they may
cause a strangulation hazard
• Darkness increases the chances of a fall. Do not use the Jungle Gym unless there is plenty of lighting provided
Electrocutions Hazard Associated with the Metal Frame of the Jungle Gym
The Jungle Gym frame is made of metal. It is not grounded and will conduct electricity. For this reason, an
electrocution hazard exists. No light, electric heaters, extension cords or household electrical appliances are to be
permitted in or on the Jungle Gym at any time.
Placing the Jungle Gym in a Safe Place
To avoid injury, the Jungle Gym must be kept away from objects and possible hazards including electric power
wiring, tree limbs, and fences. Do not place the Jungle Gym near any other recreational device or structures such
as a swimming pool or hot tub. The Jungle Gym must be placed on a level surface before use. The area around the
Jungle Gym must always have plenty of light.
For the Supervisor
Be familiar with the information in this manual and enforce all of the safety rules. Help new users and all user to the
Jungle Gym. All Jungle Gym users must have someone watch them, regardless of the skill or age of the user. Keep
the Jungle Gym free of any objects that could interfere with the proper use of the Jungle Gym such as but not
limited to, jump ropes, clothesline, pet leashes, cables, extension cords, garden hose and chains as they may cause
a strangulation hazard.
For the Jungle Gym User
Do not use the Jungle Gym when under the influence of drugs or alcohol. Do not attempt to jump onto or off of the
Jungle Gym. Wear clothing that does not have drawstrings, hooks, loops or anything else that can get caught in the
Jungle Gym.
14

15
Don't forget to check us out online! We'd love to hear from you.
To reduce the risk of serious injury, read and follow all of the warnings, precautions, and instructions in this manual
before you use this equipment. Warnings and instructions for care, maintenance, and use of this Jungle Gym
Accessory are included to promote safe enjoyable use of this equipment.
1. The Arched Ladder Climber is designed for up to 1
person and has a 81 lb. total weight limit.
2. On-site adult supervision for children of all ages at
all times is required.
3. Instruct children not to walk close to, in front of,
behind, or between moving items. Instruct children
to keep a safe distance away to keep from being
struck by items in play.
4. Instruct children not to twist swing chains or ropes
or loop them over the top support bar since this
may reduce the strength of the chain rope.
5. Instruct children to avoid swinging empty seats.
These may strike other children or come back and
strike you.
6. Teach children to sit in the center of the swings with
their full weight on the seats. DO NOT allow children
to stand on the seats and DO NOT allow children to
lean to the side or collide with other playmates.
7. Instruct children not to use the equipment in any
manner other than intended.
8. Instruct children not to get off equipment while it is
in motion. Do not allow children to jump from moving
play items.
9. Dress children in appropriate clothing while playing
on and around the equipment. Do not allow the
children to wear loose fitting clothing, hood and
neck drawstrings, scarves, cord-connected items,
capes, and ponchos. These items can cause death
by strangulation.
10. Do not allow children to play on equipment when it
is wet. Injury due to slips or falls may occur.
11. Instruct children not to attach items to the
playground equipment that are not specifically
designed for use with the equipment, such as,
but not limited to, jump ropes, clothesline, pet
leashes, cables and chain as they may cause a
strangulation hazard.
12. Instruct children to always grasp the Jungle Gym
frame rails while playing and climbing.
13. Check the openings between rollers and sliding
surfaces of rollers slides for materials that could be
potentially hazardous.
14. Make sure that suspended climbing ropes, chain,
or cable are secured at both ends and cannot be
looped back on itself.
15. Instruct children to remove their bike or other
sports helmets before playing.
16. Dress children with well-fitting and full foot
enclosing footwear. Do not wear clogs, flip flops,
and sandals.
17. WARNING: Lawn swings are designed for use
by children two years of age and older. The use
by children under the age of two can result in
entrapment between the seat and back rest
because the child’s body may pass through the
opening, causing entrapment of the child’s head.
Such entrapment may result in strangulation.
NEVER place children in a rearward facing positon
or with legs between the seat and backrest.
18. Instruct children to step on and off of the Jungle
Gym Station, do not jump.
19. Check bolts before every use. Tighten any bolts
that have become loose before allowing children to
play.
INSTRUCTIONS FOR USE
@skywalkertrampolines skywalkertrampolines @skywalker_trampolines
@swtrampolines @swtrampolines www.skywalkertrampolines.com

16
The labels shown on this page have been attached to the Jungle Gym Base Station in the indicated locations. If
one of the labels is missing or illegible, call our Customer Care Hotline toll-free at 1-866-603-JUMP (5867), Monday to
Thursday, 8 a.m. to 5 p.m., and Friday, 8 a.m. to 3 p.m. Mountain Time, to order a free replacement label.
WARNING LABEL PLACEMENT
Model SJG205
ActivPlay Arched Ladder Climber Module
Made in China
Skywalker Holdings, LLC
P.O. Box 547 Brigham City, UT 84302
www.skywalkertrampolines.com
Factory address: Qingda Industrial Park
Chengyang Qingdao Shandong China
Model
SJG200
SJG201
SJG202
SJG203.1
SJG204
SJG205
SJG206
SJG207
SJG208
SJG209
The total maximum weight not to exceed 648 lbs.
User Max
3 children
2 children
1 child
1 child
See SJG201 & SJG203.1
1 child
See SJG205 & SJG208
See SJG202 & SJG209
1 child
2 children
Weight Capacity
243 lbs.
162 lbs.
81 lbs.
81 lbs.
81 lbs.
81 lbs.
162 lbs.
Age Grading: 4-8 years
Total Maximum Occupancy: 8 Children

PLAYGROUND SURFACING MATERIALS
The following information is from Section 4 of the United States Consumer Product Safety Commission’s (USCPSC) Outdoor Home
Playground Safety Handbook for playground surfacing material.
X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK
X3.1 Select Protective Surfacing — One of the most important things you can do to reduce the likelihood of serious head injuries
is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be
applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F1292. There are different
types of surfacing to choose from; which ever product you select, follow these guidelines:
X3.1.1 Loose Fill Materials:
X3.1.1.1 Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered wood fiber
(EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel
for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of surfacing
over time. The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain at least a
9-inch depth.
X3.1.2 Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly,
this should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or compacted.) NOTE: Do
not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result
in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental
factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective
surfacing. Ground level equipment such as a sandbox, activity wall, playhouse or other equipment that has no elevated play
surface does not need any protective surfacing.
X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t
forget to account for water drainage.
X3.1.3.1 Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of loose-fill
materials, mark the correct level on play equipment support posts. That way you can easily see when to replenish and/
or redistribute the surfacing.
X3.1.3.2 Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.
X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing other than loose-
fill materials like rubber tiles or poured-in-place surfaces.
X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself ” projects.
X3.1.4.2 Review surface specifications before purchasing this type of surfacing. Ask the installer/
manufacturer for a report showing that the product has been tested to the following safety standard: ASTMF 1292
Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. This
report should show the specific height for which the surface is intended to protect against serious head injury. This
height should be equal to or greater than the fall height – vertical distance between a designated play surface (elevated
surface for standing, sitting, or climbing) and the protective surfacing below – of your play equipment.
X3.1.4.3 Check the protective surfacing frequently for wear.
X3.1.5 Placement — Proper placement and maintenance of protective surfacing is essential. Be sure to:
X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions.
X3.1.5.2 For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the
height of the top bar from which the swing is suspended.
X3.1.5.3 For tire swings, extend surfacing in a circle whose radius is equal to the height of the suspending chain or rope,
plus 6 feet in all directions.
This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and
“Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to the: Office of Public
Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: [phone].
17

Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal
use and service conditions. The steel frame is warranted for three (3) years after the date of purchase. All other
parts are warranted for one (1) year after the date of purchase. Warranty coverage extends only to the original retail
purchaser from the date of original purchase. This warranty is only valid concerning products used for residential
use. Products used for commercial use, such as schools and daycares, will not be covered.
WHAT IS NOT COVERED?
LIMITED WARRANTY
Weather Damage: The warranty does not cover damage due to the effects or acts of nature, such as
earthquakes, wind, hurricanes, tornadoes, lightning, rain, fire, snow, excessive heat and cold conditions
and/or sun damage. During the winter months the soft materials will need to be removed and stored in
a dry place out of the snow. If left unprotected in the winter months, some components may become
damaged, voiding this warranty.
Fading and Rust: Our products are fully galvanized and/or powder-coated. We do not warrant against
rust or corrosion. Some areas may have higher air salt content, higher humidity, heavier rain and heavier
snow. We do not warrant against fading. We suggest customers use a UV protectant to extend the life of
the product.
Loss or damage to Product: Loss or damage caused by shipping, abuse, misuse, improper/abnormal
usage or unauthorized repairs are not covered by this warranty and may also void the warranty.
Unauthorized Replacement Parts: The warranty will become void if any defects or damages are
associated with the use of unauthorized replacement parts. All replacement parts must be obtained from
an authorized retailer.
Assembly Service: The warranty does not cover acts or omissions provided by a third-party assembly
service. It is the customer’s responsibility to check all boxes and confirm all components are included and
in their proper condition before installation occurs.
INSPECTION AND REPLACEMENT PARTS:
1.
2.
3.
NOTE: All requested information must be provided in order to review your warranty claim.
To order replacement parts for your product please visit www.skywalkertrampolines.com
Skywalker Holdings, LLC, PO Box 574, Brigham City, UT 84302 USA.
Printed in China © 2021 Skywalker Holdings, LLC
Your product should be inspected upon unpacking and set up and thereafter on a regular basis. Worn, damaged
or broken parts should be replaced immediately and before each use.
Call the Skywalker Holdings Customer Service Department at 1-866-603-5867 to file a warranty claim. Be
prepared to provide the following information: name, shipping address, a copy of your original sales receipt, a brief
description of the problem and cause, product model number and serial number. We may also ask for photos of
the damaged/defective parts.
Customer service will review your claim and contact you with further instruction.
18

NOTE: Skywalker Holdings, LLC is not responsible or liable for indirect, special or consequential damages arising
out of or in connection with the use or performance of the product or other damages with respect to any economic
loss, loss of property, loss of revenue or profits, loss of enjoyment or use, cost of removal, installation or other
consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential
damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of all other warranties and any implied warranty of merchantability
or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states or
countries do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not
apply to you. This warranty gives you specific legal rights. You may also have other rights which vary state to state
or country to country.
This warranty is valid only in the country the product was purchased.