skywalker sports STT100 Mounting instructions

Model
CHOKING HAZARD
due to small parts
Adult assembly required
Please retain for for future reference.
IMPORTANT
Two capable adults required
for all the assembly procedure.
Failure to follow this warning
could result in serious injury
and/or property damage.
WARNING
!
Assembly Installation, Care Maintenance
and User Instructions Manual
Skywalker Holdings LLC
PO Box 574, Brigham City, UT 84302
Model
Read all precautions and
instructions in this manual before
using this equipment. Save this
manual for future reference.
Maximum occupancy 2 users.
Maximum weight capacity .
80 lbs
AGES 4 to 8
__________
STT100
STT100
____
™

If you have questions after reading this manual, please call our toll-free Customer Care Hot
Line. Our trained technicians will provide immediate assistance.
WARNING
Read the assembly, installation, care, maintenance, and use instructions in this manual
prior to assembling and using this equipment. Save this manual for future reference.
(Model STT100 ID label location)
(Warning label location)
!
REPLACEMENT PARTS or QUESTIONS
Customer Care Hot Line: 1-866-603-5867
Monday --- Friday, 8:00 am ---- 5 p.m. Mountain Time
CONTENTS
2
Questions ..............................................................2
Replacement Parts.................................................2
Warning.................................................................2
Warning for safe use ............................................3
Assembly and Installation Instructions ................3
Care and Maintenance Instructions.......................3
Play Ground Surfacing Materials..........................4
User Instructions....................................................5
Parts Lists..............................................................6-7
Assembly
...............................................................8-11
Limited Warranty...................................................12
Read and understand warnings listed
below before using this product.
Failure to follow these warnings may
result inserious injury and/or property
damage.
Owner must ensure that all players know and
follow these rules for safe operation of the system.
• Adult supervision is required at all times when the
teeter totter is used by children.
• To reduce risk of entanglement, keep small
children away from the teeter totter area at all
times.
• When properly assembled and used as intended,
this teeter totter is designed to provide many
hours of playing enjoyment.
• Never let children climb on the teeter totter as
this can result in the teeter totter falling over
causing serious injury or death.
• The metal frame of the teeter totter will conduct
electricity. Lights, extension cords, and all such
electrical equipment must never be allowed to
come in contact with the teeter totter.
• Inspect the teeter totter before each use. Make
sure all parts are correctly and securely positioned
and attached. Tighten any loose hardware. Replace
any worn, defective, or missing parts.
• Wear comfortable clothing free of hooks, snaps,
drawstrings or anything which may snag or catch
in the teeter totter. Remove jewelry, necklaces,
and earrings.
• Read all instructions and complete all assembly
before using.
• Adequate overhead clearance is essential. Provide
clearance for wires, tree limbs, and other possible
hazards.
• Lateral clearance is essential. Place the
teeter totter away from walls, structures, fences,
and other play areas. Maintain a clear space on all
sides of the teeter totter.
• A minimum of 3m from frame edge is
recommended.
• Never set-up the teeter totter in heavy rain, wind
or storm conditions, especially storms.
• When moving the assembled teeter totter have at
least two people evenly holding the frame to lift the
teeter totter off the ground.
• Place the teeter totter on a level surface before
use.
• Secure the teeter totter against unauthorized and
unsupervised use.
Please pay attention to the below items of
teeter totter:
• check all nuts and bolts for tightness and tighten
when required
• Keep pole top covered with cap at all times.
• oil all metallic moving parts;
del
de i
ywa
Bo USA
.S
STT100
n China
lker Holdi
x 547, Bri
kywalkert
Mo
Skywalker Sports
Ma
Sk
PO
www
Rotatable Teeter Totter
ngs, LLC
gham City, UT, 84302
rampolines.com
Factory address: Qingda Industrial Park
Chengyang Qingdao Shandong China
THIS PRODUCT IS INTENDED
FOR USE BY CHILDREN FROM
AGES 4 TO 8.
“This conforms to ASTM F1148 ,
Consumer Safety Performance
Specication for Home
Playground Equipment.”
(Warning label advertencia)

3
BEFORE YOU BEGIN
INSTALLATION
WARNING! To reduce the risk of serious injury, read all important precautions and instructions
in this manual and all warnings on the Teeter Totter before assembly and use of this product.
Thank you for selecting a Skywalker Holdings Teeter Totter. The Teeter Totter will provide
many years of backyard fun. Your Teeter Totter comes equipped with warnings and
instructions for the assembly, care, maintenance, and use. This information must be read by
all Teeter Totter supervisors and communicated to or read by all users before any person is
allowed to use the Teeter Totter.
If you have any questions after reading this manual, please call our toll-free Customer Care
line at 1-866-603-5867, Monday through Friday, 8 a.m until 5 p.m. Mountain Time (excluding
holidays)
1. It is the responsibility of the owner and supervisors of this Teeter Totter to make sure all users
obey the safety instructions printed in this material.
2. This product is intended for use by children ages 4 to 8.
3. Use the Teeter Totter only as described in this manual.
4. Always use the Teeter Totter under adult supervision.
5. Total Weight capacity is 80lbs.
6. Be sure that Teeter Totter is on a level surface, not less than 6 ft (1.8m) from any structure or
obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical
wires.
7.
Do not let children use equipment until properly assembled. Always inspect the Teeter Totter
before it is used and replace any worn, defective, or missing parts. (Users may be hurt if the
teeter Totter is used when it is in poor condition.)
Do not install over concrete, asphalt, packed
earth, grass, carpet, or any other hard surface.
8. Never set-up the teeter totter in heavy rain, wind, or storm conditions, especially storms.
9. When moving the assembled teeter totter, have at least two people evenly hold the frame to lift
the teeter totter off the ground.
10. Inspect the teeter totter before each use and replace any worn, defective, or missing
parts.The following conditions could present potential hazards: a bent or broken frame or
support system, sharp protrusions on the frame or suspension, loosened or missing hardware.
11. “This conforms to ASTM F1148, Consumer Safety Performance Specification for Home Play-
ground Equipment.”
12. Maximum fall height for the product is determined as follows:
Rockers and seesaws = maximum height of the designated play surface normally occupied
by a user.
13. Warning the owner to dress children with wellfitting and full foot enclosing footwear.
Examples of inappropriate footwear are clogs, flip flops, and sandals.

4
PLAYGROUND SURFACING MATERIALS
INFORMATION
The following information is from Section 4 of the United States Consumer Product
Safety Comission’s (USCPSC) Outdoor Home Playground Safety Handbook for
playground surfacing material.
X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME
PLAYGROUND SAFETY HANDBOOK
X3.1Select Protective Surfacing — One of the most important things you can do to reduce the likelihood of serious head
injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfac-
ing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F1292.
There are different types of surfacing to choose from; which ever product you select, follow these guidelines:
X3.1.1Loose Fill Materials:
X3.1.1.1 Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered
woodfiber (EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea
gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of
surfacing over time.The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain
at least a 9-inch depth.
X3.1.2Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If main-
tained properly, this should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or
compacted.) NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall
onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective
surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin
mats are generally not adequate protective surfacing. Ground level equipment such as a sandbox, activity wall,
playhouse or other equipment that has no elevated play surface does not need any protective surfacing.
X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape
edging. Don’t forget to account for water drainage.
X3.1.3.1 Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of
loose-fill materials, mark the correct level on play equipment support posts. That way you can easily see when to
replenish and/or redistribute the surfacing.
X3.1.3.2 Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.
X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfac-
ing other than loose-fill materials like rubber tiles or poured-in-place surfaces.
X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself” projects.
X3.1.4.2 Review surface specifications before purchasing this type of surfacing. Ask the installer/manufacturer
for a report showing that the product has been tested to the following safety standard: ASTMF 1292 Standard Specifica-
tion for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. This report should
show the specific height for which the surface is intended to protect against serious head injury. This height should be
equal to or greater than the fall height – vertical distance between a designated play surface (elevated surface for
standing, sitting,or climbing) and the protective surfacing below – of your play equipment.
X3.1.4.3 Check the protective surfacing frequently for wear.
X3.1.5 Placement — Proper placement and maintenance of protective surfacing is essential. Be sure to:
X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions.
X3.1.5.2 For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to
twice the height of the top bar from which the swing is suspended.
X3.1.5.3 For tire swings, extend surfacing in a circle whose radius is equal to the height of the suspending
chain or rope, plus 6 feet in all directions.
This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information
Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to
the: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free
hotline: [phone].

5
USER INSTRUCTIONS
Observing the following statement and warnings reduces the likelihood of serious or
fatal injury.
1. The Teeter Totter is designed for up to 2 persons and not to exceed 80 lbs. total weight limit.
2. Read all instructions and complete all assembly before using.
3.
Instruct children not to walk close to, in front of, behind, or between moving items.Instruct
children to keep a safe distance away to keep from being struck by items in play.
4. Instruct children not to use the equipment in any manner other than intended.
5. Instruct children not to get off equipment while it is in motion. Do not allow children to jump
from moving play items.
6. Dress children in comfortable clothing free of hooks, snaps, drawstrings or anything which
may snag or catch in the teeter totter.
7. On-site adult supervision for children of all ages at all times is required.
8. To reduce risk of entanglement, keep small children away from the teeter totter area at all
times.
9. When properly assembled and used as intended, this teeter totter is designed to provide
many hours of playing enjoyment.
10. Never let children climb on the teeter totter as this can result in the teeter totter falling over
causing serious injury or death.
11. The metal frame of the teeter totter will conduct electricity. Lights, extension cords, and all
such electrical equipment must never be allowed to come in contact with the teeter totter.
12. Inspect the teeter totter before each use. Make sure all parts are correctly and securely
positioned and attached. Tighten any loose hardware and replace any worn, defective, or
missing parts.

PARTS LIST FOR TEETER TOTTER
Key
No. Qty
.Description
Key
No. Qty. Description
6
Seat
Handle Cushion
Seat Pole Assembly
Rotation pole Assembly
Turret Assembly Support Pole
Limit Frame
123
4
5678
1 1
10 8 M8X50 Bolt
11 4 M8X62 Bolt
12 1 M10X75 Bolt
13 2 M6X15 Bolt
14 12 M8 Locknut
2 3
3 1
4 2
5 2
6 2
7 2
8 2
Turret Assembly
Support Pole
Rotation Pole Assembly
Seat Pole Assembly
Handle
Seat
Limit Frame
Cushion
9 4 M8X18 Bolt
15 1 M10 Locknut
16 4 M8 Washer
17 4 M8 Spring Washer
18 1 6mm Hex Key
19 1 L-Screwdriver
20 1 Wrench

TOOLS REQUIRED
PARTS LIST FOR TEETER TOTTER
7
M8X18 Bolt M8X50 Bolt
M8X62 Bolt
M6X15 Bolt M8 Locknut
M8 Spring Washer
M8 Washer
6mm Hex Key Wrench
L-Screwdriver
SAFETY INSTRUCTIONS
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR
PROPERTY DAMAGE AND WILL VOID WARRANTY.
Owner must ensure that all players know and follow these rules for safe operation of the system.
To ensure safety, do not attempt to assemble this system without following the instructions
carefully. check entire box and inside all packing material for parts and/or additional instruction
material. Before beginning assembly, read the instructions and identify parts using the hardware
identifier and parts list in this document. proper and complete assembly, use, and supervision are
essential for proper operation and to reduce the risk of accident or injury. A high probability of
serious injury exists if this system is not installed, maintained, and operated properly.
• a recommendation to place the toy on a level surface at least 2 m from any structure or
obstruction such as a fence, garage, house, overhanging branches, laundry lines or electrical
wires;
• detailed instructions on how anchors are to be installed to prevent overturning or lifting of the
support members during normal or foreseeable misuse also taking into account the condition of
the soil normally encountered;
• instructions that anchors shall be placed level with or under the ground in order to reduce
tripping hazards;
• instructions that toys (for example swings, slides, climbing frames) shall not be installed over
concrete, asphalt or any other hard surface;
• a recommendation on the orientation of the toy in relation to the sun (e.g. slides);
• information to keep assembly and installation instruction for further reference.
Most injuries are caused by misuse and/or not following instructions.
Use caution when using this system.
TOOLS REQUIRED
•Two (2) Capable Adults
• Tape Measure
• Hammer
• #2 or #3 Phillips
Screwdriver
• Safety Glasses
• Large and Small
Adjustable
Wrenches
M10X75 Bolt
M10 Locknut
910
11 12
13 14 15
16 17
18 19 20

1
8
Attach the rotation pole assembly (3) to the turret assembly (1) using the
M10X75mm bolt (12) and M10
locknut (15). Do not tighten the bolt completely to ensure that the change point
turns smoothly.
Insert the three support poles (2) into the turret assembly (1). Make sure the buttons snap into place.
2
1
Turret Assembly
1Support Pole2
M10X75 Bolt12
Rotation pole Assembly
3
M10 Locknut
15
3
15
12
1

2
9
Attach the seat pole assembly (4) to the rotation pole assembly (3) using two M8X50mm bolts (10) and
two M8 locknuts (14). Repeat this step on the other side of the weight system.
Seat Pole Assembly
4M8X50 Bolt10
M8 Locknut
14
14 14
4
1010
3

3
10
Install the seat (6) to the seat pole assembly (4) using two M8X62mm bolts (11) and two M8 locknuts (14).
Repeat this step on the other side of the weight system.
Attach the handle (5) to the seat pole assembly (4) using two M6X50mm bolts (10) and two M8 locknuts (14).
Repeat this step on the other side of the weight system.
Handle
5M8X50 Bolt
10 M8 Locknut 14
M8X62 Bolt
11
5
10
14
11
6
14
4
4
Seat
6

4
11
Cushion
Limit Frame
78
M6X15 Bolt
13
M8 Spring Washer
M8 Washer16 17
M8X18 Bolt9
Install the cushion (8) tothe Limit Frame (7) using M6X15mm bolts (13). Repeat this step on the other
side of the weight system. Note: Make sure all the bolts in the steps above are tightened.
Install the Limit Frame (7) to the seat pole assembly (4) using two M8X18mmbolts(9), two M8 spring on
the other side of the weight system.
7
9
17
16
7
8
13
washers (17) and two M8 washers (16). Repeat this step
4

12
LIMITED WARRANTY
Skywalker Holdings, LLC warranties its products to be free from defects in material and
workmanship under normal use and service conditions. The steel frame is warranted for one
(1) year after the date of purchase. All other parts are warranted for ninety (90) days after the
date of purchase. Wind or weather damage is not warranted.
All warranty coverage extends only to the original retail purchaser from the date of purchase.
Skywalker Holdings, LLC obligation under this Warranty is limited to replacing or repairing, at
Skywalker Holdings, LLC option, the product at one of this authorized service centers. All
products for which a warranty claim is made must be received by Skywalker Holdings, LLC
at one of its authorized locations. Preauthorization may be obtained by calling Skywalker
Holding, LLC Customer Care Hot Line at 1-866-603-Jump(5867). This Warranty does not
extend to any product or damage to a product caused by or attributable to freight damage,
abuse, misuse, improper or abnormal usage, or repair not provided by a Skywalker Hold-
ings, LLC authorized service center, or to products used for commercial or rental purpose.
No other Warranty beyond that specifically set forth above is authorized by Skywalker
Holdings, LLC.
SKYWALKER HOLDINGS, LLC IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT,
SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH
RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR
PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR
OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
ACCORDINGLY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
THE WARRANTY EXTENDED HEREUNDER IS IN LIEU OF ALL OTHER WARRANTIES
AND ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU-
LAR PURPOSE IS LIMITED IN ITS SCOPE AND DURATION TO THE TERMS SET FORTH
HEREIN. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS. ACCORDINGLY, THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. This Warranty gives you specific LEGAL RIGHTS.
You may also have other rights which vary state to state.
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES.
Skywalker Holdings, LLC, PO Box 574, Brigham City, UT 84302 USA.
Printed in China © 2015 Skywalker Holdings, LLC,