SlimLine LECDPSV4 User manual

Lectern Parts:
1. Reading Top
2. Pole
3. Base
4. Connector (4)
Hardware:
5. Flat Head Screws (4)
6. Dome Head Screws(4)
7. Hexagon Socket Set Screws (12)
8. Allen Key
9. Philips Head Screwdriver
1. Reading Top
5. Flat Head Screws (4)
7. Hexagon Socket Set Screw (6)
2. Pole
4. Connector (2)
6. Dome Head Screws(4)
7. Hexagon socket set screw (6)
4. Connector (2)
3. Base
8. Allen Key
9. Philips Head Screwdriver
LECDPSV4
LECDPBK3
Assembly Instructions

Assembling the Connectors to the Pole
Figure 2
Figure 4
1. Attach the 2 Connectors to the holes of the Pole.
2. Use the provided Allen Key to fix the Hexagon Socket
Set Screws (6) on the matched holes in the Pole shown as
illustrated in Figure 2.
Assembling the Pole with Connectors to the Base
1. Align the holes in the Base with holes in the Pole.
2. Use the provided Screwdriver to attach the Base to the
Pole from bottom to top with 4 Dome Head Screws shown as
illustrated Figure 3.
Assembling the Reading Top to the Pole
1. Align the holes in the Pole with holes in the
Reading Top.
2. Use the provided Screwdriver to attach the
Reading Top to the Pole from top to Bottom with 4
Flat Head Screws shown as illustrated Figure 4.
Figure 3