SMART bc05 User manual

Quick Start Guide
Battery camera
* Thanks for purchasing and using our product. Please read this quick start guide before using, and keep it for future
reference.
* Manual contents are subject to change without notice in accordance with our policy of continuous product
improvement.
Connect the equipment into an outlet on a circuit different from that to which the receiver is

Please consult below checklist for all the components.
1. what’s in the box
2. meet the Battery camera
User GuideUSB Cable
Battery camera
Indicating LED
PIR Motion Sensor
SD Card Slot
Power
Speakers
2MP camera
microphone
Micro USB Port
Reset
Bracket slot
3
2
1
bracket Screw & Tools
1
2
4
3
4
5
6
7
8
5 6
78
9
9
10
10

The batteries inside the Battery camera not fully charged in accordance with
transportation safety regulations. Please charge the batteries with a USB
compatible wall charger (not included) and the provided USB cable for about
8~10 hours prior to installation.
Hold the device power button to start the
.Press the [battery camera] button to wake the
device if it is asleep
.Please stay near your router for the best signal
Add Battery Camera
Next
9:55
device
· . Hold the RESET button on your device for 4-5
seconds(please consult the user manual for
more on this)
· Wait for the LED indicator to flash RED
· Tap Next
Please reset the device
Install Doorbell
Next
9:55
5. Battery charging
6. Download the app
7. wi-fi set up
9:55
Devices Messages MeFriends
Tap + to add a new device
Devices
- 2 -
1. Tap on “+” to add device 3. Check the power status 4. Reset theBattery camera
Before you start the Wi-Fi configuration, please note below:
1). The Battery camera works with 2.4 GHz Wi-Fi, but not with 5 GHz Wi-Fi.
2). Avoid using special characters or symbols like )(@~!#$%^&*..., either in your Wi-Fi name or password.
3). Perform the configuration near your Wi-Fi router.
Launch the CloudEdge APP and register an account with your mobile phone numer of email ID. Then start the Wi-Fi
Before you start the Wi-Fi configuration, please note below:
Download and install the 'CloudEdge' app from Google PlayTM or the
App StoreTM. The App is also available by scanning the QR codes on
the right, using your QR code scanner in your smart phone.
NOTE: Google PlayTM is a trademark of Google Inc. App StoreTM is a
service mark of Apple Inc.
Camera
Battery Camera Floodlight Camera
Network Video
Recorder
Doorbell
2. Select doorbell

Select your Wi-Fi network
Change WiFi
Hide Password
Home
Password123
(Please select a 2.4G network, this device will not
work with 5G Wi-Fi networks)
Wi-Fi Setup
Next
9:55
Operation Scan QR Code
Scan the QR code below with the
device at a distance of 5-8 inches.
A tone will be heard when
successfully scanned.
Help Next
Next
9:55
Please remove all film from the lens. Tap
Next to show a QR code, and let your device
scan the code. Keep your phone 5-8 inches
from the lens.
8. run a test
Devices
9:55
056853326
9:55
Please stay near your router for the
best signal
Device Found!
Connecting device to network...
Registering device...
12%
connecting...
Connect Network
- 3 -
6. Input Wi-Fi password 7. Prepare the scanning 8. Generate the QR code
9. Wait for Wi-Fi connection 10. Adding device succeeds
After setup, tap on the live view window in the app
for a test. Then take your doorbell outside to the
installation spot and run a test there. Make sure the
installation spot is covered by strong 2.4 GHz Wi-Fi
signal.
Note:
If the video quality from the Battery cameraoutside is not as
good as it was indoors, you may need to move your
router closer to your installation spot, or invest in an
Wi-Fi extender.

HD
9. Live view interface
3
6
9
4
1
7
10
13
2
5
8
11
14
Quit live viewing
Volume on/off
Stream bit rate
Speak to the scene
Notification history
Setting menu
HD/SD switch
Wi-Fi signal status
Record on the phone
Cloud storage service
12
Battery status
Wi-Fi signal status
Screenshot button
Body detection on/off
HD
Local recording
Video Calendar
Screenshot Function
Alarm events recording

14. Specification
Storage Type
Cloud storage
Recording
Storage
Video & Audio
Image Sensor
OS
Resolution
Stream
Infrared LED
Lense
Angle of view
Min. illumin.
WDR
Audio
1/2.7” CMOS (2.0MP)
Hisilicon Lite-OS
1920 × 1080 px
HD/SD dual stream
High power IR LED with ICR
1.7mm/F2.0
130°
Digital WDR
2-way audio with noise cancellation
Color: 0.01 Lux; B&W: 0.001Lux
Network
Wifi Frequency
Standards
Live View Speed
Micro SD Card (Max 128G)
Support
Triggered by PIR motion sensor
2.4 GHz ~ 2.4835 GHz
IEEE 802.11 b/g/n
Within 3 ~ 4 Sec
APP
App Name
OS
Remote View
Notification
CloudEdge
iOS, Android
Within 2~4 sec
Push notification within 2~4 sec
Genaral
Lithium 18650 Battery (3.5V, 3000mAh ) × 2
300μA
250mA
4 ~ 6 Months
2 ~ 3 Months (20 times wake up per day)
DC5V 1A~2A (Micro USB Port)
61× 41 × 135
235
OTA (on the air)
-20℃~ 50 ℃ ; <90% (No condensation)
Power Source
Standby Current
Working Current
Standby Time
Working Time
Battery Charging
Firmware Upgrade
Dimension (mm)
Weight (g)
Working Temp.
& Humidity
- 4 -

15. Trouble shooting
Q1: Why I failed to set up Wi-Fi for the doorbell?
A1: ①.Device works with 2.4GHz Wi-Fi only, but not support 5GHz Wi-Fi. ②.Wi-Fi network is not good, try to keep the
camera near the Wi-Fi router when setting up. ③.The Wi-Fi password is wrong. Please check if there are special
characters in the password, or the network is specially encrypted.
Q2: How do I know if I have 2.4G or 5G wifi?
A2: Please check the user manual of your Router or call the network operator for help.
Q3: It has to be on same WiFi to see the camera, or is it over internet from anywhere?
A3: You can view the camera from anywhere, if your camera is well connected to the internet.
Q4: Do any of the recordings get saved to the cloud? Or is it mainly saved in the built-in SD card?
A4: It supports SD card recording as well as cloud storage. You can activate the cloud storage service in App.
Q5: What happens when the SD is full?
A5: When the memory card is full, the camera automatically erase the oldest footage.
Q6: Does it work with Google Home or Alexa?
A6: Sorry, this model does not support Google Home or Alexa.
Q7: Why does it lose connection to wifi?
A7: Please check the network connection of your phone and the Wi-Fi router. If the network signal is not strong, you
may need to move your router closer to the device, or invest in an extender.
Q8: Can the motion detection be disabled?
A8: Yes, sure. Recording is triggered by detected motions. You can set up the sensitivity or disable motion detection in
the setting menu.
Q9: Do we get charger for the batteries?
A9: Battery charger is not included. Please charge the batteries with a USB compatible charger(DC5V 1A~2A) for about
8-10 hours.
Q10: Can we have 2 or more battery camera at the same residence?
A10: Yes, you can add more than one device at the same residence.

16.FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.