SME Spot Shot SME-SCPCAM User manual
FCC Warning Limited Warranty
Patent Pending
www.gsmoutdoors.com
GSM, LLC
PO Box 535189, Grand Prairie, TX 75053-5189
Toll Free: 877-269-8490
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator & your
body.
SME Spot Shot WIFI Scope Cameras are covered by a
One Year Limited Warranty. This Warranty covers
rangefinders with manufacture defects. Normal wear &
tear as well as product abuse are not covered by the
warranty.
This Warranty is valid only for the original owner of the
WIFI Scope Camera purchased from an authorized
retailer. Tampering with or altering the unit will void the
warranty.
Any unauthorized service will void the warranty.
Original sales receipt must be produced for any
warranty service and a Return Authorization (RA)
number must be obtained from customer service at
877-269-8490 prior to returning the product.
For more information go to
www.shootingmadeeasy.com
SME-SCPCAM
Instruction
Manual
Product by SME
A GSM, LLC Brand
www.shootingmadeeasy.com
877-269-8490
IC WARNING
This device contains licence-exempt transmitter(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment meets the exemption from the routine evaluation limits in section
2.5 of RSS-102. It should be installed and operated with a minimum distance of
20cm between the radiator and any part of your body.
Thank you for purchasing the
WIFI Scope Camera
Included:
WIFI Scope Camera Carry Pouch 1m Micro USB Cable
*Spong Scope sold separately*
Attaching to Spotting Scope
Make sure grips inside rotating chucks are full open.
Rotate lower rotating chuck
counter-clockwise (when
viewing from bottom) to
open grips.
Carefully place WIFI Scope camera over eyepiece of
spotting scope.
(Spot Shot WIFI Scope Camera will fit eyepieces with diameters range
of 1” – 2.25” )
Secure Camera by
rotating chuck
counter-clockwise
(when viewing from
top) to close grips.
*DO NOT OVERTIGHTEN*
If your camera is not straight, rotate main body. Use
power button as reference. Camera is straight when
power button logo is centered on top.
*Note all focus will come from the spotting
scope. Use scope as you normally would*
Download the SME SpotShot APP
1) Download the SME Spot Shot APP from the Apple
App Store or Google Play Store
2) Power on the WIFI Scope Camera
3) Connect to the SpotShot WIFI network as you would
any other WIFI network. Go to the WiFi settings on
your mobile device and select the Spot Shot Wifi.
4) Launch the App and select Connect
5) Make sure you are connecting to correct network. If
correct, select Proceed. If not, select Settings to
change
