Smith & Noble Metro Chic Hardware User manual

STEP BY STEP INSTALLATION INSTRUCTIONS
Metro Chic
Hardware
Corner Ceiling Mount
Single Rod Set

2
800.248.8888
1smithandnoble.com
A Smooth Set-Up
We want you to love your new hardware and that includes having
a smooth installation experience. We suggest saving this guide. If
you encounter any difculties or questions, please reach out to us
for help. It’s why we’re here. Call us at 800.248.8888 for more info
on installation.
We recommend you hold on to all packaging until your hardware is
fully installed. Should something go wrong (we strongly doubt it), we
want any potential returns to be a painless as possible.
Customer Service Hours
Monday — Friday: 6am — 6pm PT
Saturday — Sunday: 7am — 4pm PT
smithandnoble.com
Everything
You Need
Table of Contents
Step 1 - Getting Started ..................................3
Overview - Corner Ceiling Mount Single Rod Set...............4
Step 2 - Marking Brackets and Placement ..................5
Step 3 - Attaching the Rod Connector......................6
Step 4 - Adding or Removing Carriers & End Stops ..........7
Step 5 - Attaching Bracket to Rod .........................8
Step 6 - Attaching the Finials .............................9
Step 7 - Attaching Elbow/Corner Brackets .................10
Step 8 - Attaching Brackets to Ceiling.....................10
Step 9 - Attaching Drapery to Rod ........................11
Accessories - Baton/Wand ...................................12
Care & Cleaning ...................................Back Cover
Warranty ..........................................Back Cover

34
smithandnoble.com 800.248.8888
Return Rod
Ceiling Mount
Bay
Ceiling Mount
STEP 1 - GETTING STARTED OVERVIEW
Before you begin, check the accompanying diagram to make sure you have all the parts you
need. You’ll need to make sure the surface you intend to install your hardware is sturdy
enough to accommodate the brackets. If you’re screwing directly into a surface this means
locating wood studs that are strong enough to securely bond with the included screws.
Otherwise, you’ll need to use a secure fastener (as illustrated) but please note this piece is
not included.
Tools & Parts Metro Chic Ceiling Corner Rod Set
WALLBOARD OR PLASTER:
Hollow wall applications: Use a secure fastener designed
specically for this purpose.
METAL:
Prepare by pre-drilling holes and then using the included screws.
CONCRETE, STONE, BRICK OR TILE:
Use a masonry drill and surface-specic plugs, anchors, or screws. When selecting a
fastener be sure it’s designed to support the weight of the product being installed (if you’re
not sure, either give us a call or ask a professional at your local hardware store). Once
obtained, follow the fastener manufacturer’s instructions regarding proper installation.
TOOLS YOU WILL NEED TO INSTALL YOUR HARDWARE:
Pencil, screwdriver, ¼" nut driver, level, and a drill with a 7⁄64" drill bit.
Note: It’s important to monitor the amount of pressure you apply when using a drill. If the
screws are too tight this may cause the screw itself to break off in the wall or window frame.
MOLLY
BOLT
SELF DRILLING
ANCHOR
TOGGLE
BOLT
SCREWS SET SCREWS
ALLEN WRENCHES
90 ° Corner Bracket
Elbow Bracket
MOUNTING
BRACKET
MOUNTING
BRACKET
ELBOW
BRACKET
ELBOW
BRACKET
MOUNTING
BRACKET
MOUNTING
BRACKET
ROD90 ° CORNER
BRACKET
ROD
MOUNTING
BRACKET MOUNTING BRACKET
SET SCREWS
CORNER/ELBOW BRACKETS
SCREWDRIVER & PENCIL
(NOT INCLUDED)
POWER DRILL & LEVEL
(NOT INCLUDED) SPLICE COVER
CARRIERS
CEILING MOUNT BRACKET
HEX SCREW HEX SCREW

56
smithandnoble.com 800.248.8888
Mounting the Brackets
1. Place the panel on one of the rods.
Hold it up to the spot you wish to
install it making sure there is
enough spacing from wall to
where the back of drapery will hit.
Usually about 2” away from wall or
window. After you’ve located the
ideal location, use a pencil to mark
the ceiling where the back of the
rod is resting.
2. Remove the panel from the rod
and then center the rod over the
window opening at the desired
spot. Using the pencil, mark where
the ends of each rod are posi-
tioned; if you’re using a center
bracket, note the middle point
between these two spots. If you
have more than one center brack-
et spread these evenly between
the two end brackets and center
point. If you have a spliced rod,
mark where that splice is on the
wall since you will need to add the
special splice bracket at that point.
Measure 6” inward from the marks
you’ve made on both ends and
mark those spots. This is where
the end brackets will be installed.
Proceed to do the same for the
other side.
STEP 2 - MARKING BRACKET PLACEMENT
CENTER
STEP 3 - ATTACHING THE ROD CONNECTOR
Depending on your order, you may
have received a rod connector. A rod
connector is the short piece of metal
placed inside eachend of the rods in
a multi-segment system to join them
together.
Join track sections together and fasten
securely with set screws.
Attach the splice cover.
SPLICE COVER
SPLICE
JOINING TRACK SECTIONS
FASTEN SET SCREWS
BACK VIEW
SPLICE COVER
ROD CONNECTOR
SET
SCREWS
SET
SCREWS
CHANNEL ROD
BACK VIEW
FRONT VIEW
2" CLEARANCE
FROM WALL OR
WINDOW
SPLICE
COVER
ROD CONNECTOR
SET
SCREWS

78
smithandnoble.com 800.248.8888
STEP 5 - ATTACHING BRACKET TO THE ROD
STEP 4 - PLACING CARRIERS & END STOPS
Adding or Removing Carriers
to the Rod
Your track rods will come with all master
carriers and regular carriers pre-installed.
If you need to add or take out some
carriers depending on your drapery,
unscrew the 90 degree corner bracket or
elbow from the rod.
Remove the carrier & end stop and either
add or take out the carriers needed.
Placing End Stop on the Rod
SPLIT DRAPERY (A)
Once all carriers have been placed in the
track, for split drapery, place end stop in
between the rst carrier from each end
and the second carrier so end of drape
does not move when drape is closed.
ONE WAY DRAW DRAPERY (B)
For one way draw drapery, place end
stop in between the first carrier from
the end and the second carrier of the
side you won’t be opening it from, so
the end of drape does not move when
drape is closed.
ROD CORNER
BRACKET
B) One Way Draw
End stop & Carrier positions
A) Split Draw
End stop & Carrier positions
END
STOP
CARRIERS
CEILING BRACKET
SPLICE
COVER
SPLICE
CONNECTOR
SPLICE
HEX
SCREW
CEILING
BRACKET
MOUNTING
POST
Insert the ceiling brackets into the
channel in the back of the rod. Do not
tighten at this time.
If your rod was spliced, attach the
center spliced bracket by taking off the
little metal plate and screwing it in the
middle hole of the splice connector.
CHANNEL
CEILING
BRACKET
CHANNEL
MOUNTING
POST
Use Splice Connector
if rod is spliced.
SPLICE CENTER
BRACKET
END STOP
CARRIERS

910
smithandnoble.com 800.248.8888
Bay
Elbow
ELBOW BRACKET
STEP 7 - ATTACHING CORNER BRACKETSSTEP 6 - ATTACHING FINIALS
SET SCREW
SET SCREW
90
° CORNER BRACKET
90
°
Corner or Elbow Bracket
Slide in 90° corner bracket or elbow
onto the end of the left rod where there
is no finial end cap and tighten set screw.
Slide in End Cap onto rod and tighten
set screw.
End Cap can be attached with the
opening at the bottom or top depend-
ing on look you want to achieve.
If you want to get your drapery all the
way to the end of the rod, then place
opening of end cap at the bottom of
rod where track is.
If you want your draperies to stop
where the end cap starts, move the
open side of the end cap to the top of
track. The covered part of end cap will
be at the bottom where track is.
END CAP FINIALS
OPEN COVERED
COVERED
END CAP FINIAL
BACK OF ROD
BACK OF ROD
OPEN
END CAP FINIAL

11 12
smithandnoble.com 800.248.8888
STEP 9 - ATTACHING DRAPERY TO ROD
Insert drapery pin hooks into carriers
and master carriers.
Split Drapery
For Split drapery, start pining from
the center and go towards the ends.
Draw one side
For drapery opening from one side
only, start pining from the opening
side towards the end.
STEP 8 - ATTACHING BRACKET TO CEILING
MASTER
CARRIER
DRAPERY
PINS CARRIERS
Hold the rod up and attach the bracket to
the ceiling, aligning the holes of the brack-
et with the marks you made on ceiling on
a previous step. Be sure and attach the
bracket to the ceiling with the appropriate
mounting hardware.
(It is always recommended to try and
attach to the ceiling joists found inside
ceiling. Where this is not possible please
use an anchor suitable to carry the weight
of your hardware selection as well as your
draperies and any accessories.)
Tighten the hex screw on the back of the
ceiling bracket to make sure the rod is
attached strongly to the bracket. HEX
SCREW
CEILING
BRACKET
SPLICE
CONNECTOR
BACK VIEW OF ROD
BACK VIEW OF ROD

13 14
smithandnoble.com 800.248.8888
Minimal care and cleaning is needed to maintain the beauty of your Hardware.
To Vacuum: Use brush or dust head attachment.
To Dust: Use soft, clean cloth.
CARE & CLEANING
Baton/Wand (optional)
Baton/Wand will be pre-attached to the
master carrier(s).
CLIP
BATON/
WAND
ACCESSORIES
MASTER
CARRIER
DRAPERY
PINS
BATON/WAND

© 2019 Smith & Noble Home, Inc. All Rights Reserved SN0219
Warranty Service
The enjoyment of your hardware should be everlasting, which is why our products
come with a limited lifetime warranty. The warranty applies to the original owner,
requires a proof of purchase (hang on to your receipt!) and covers defects in material
or craftsmanship. Hardware must have been properly installed. We reserve the right to
determine if your hardware warrants a repair or a replacement. Visit smithandnoble.
com/guarantee to see full details. In need of warranty service? Call us at 800.248.8888
and we’ll arrange for a repair or replacement ASAP.