Snail Power BM3 User manual

MODEL:BM3&BM4
From Italy Snail Power
380.00 mm
129.96 mm

01
SNAIL POWER
3. if the product appear for the causes of failure, the user can use the warranty card and purchase certificate
BM3&BM4

02 03
igh quality Matte finish (fingerprint proof);H
. -inch high performance speaker + one passive 2 25
bass vibration films;
mall volume,ully sealed body, S F
astonished music enjoyment;
ll materials meet ROHS requirement;A
Background music scene, such as home kitchen,
study, business center, etc
2：Technical parameters
BM3&BM4
1：roduct featuresP
BM3 BM4
BM3 BM4
BM3&BM4
Drive Units: 1X2.25" Driver
requency : 65Hz-20KHz(In wall)FResponse
ower Iutput: ~ 50WP10
: 85dB/W/mSensitivity
vg. Max Output @1m A:101dB
nput Impedance: 8ΩI
nputs: BindingpostI
imensions: Φ100x62mmD
et weight: 0.4Kg (Single)N
igh quality Matte finish (fingerprint proof);H
. -inch high performance speaker + two passive 2 75
bass vibration films;
mall volume,ully sealed body, S F
astonished music enjoyment;
ll materials meet ROHS requirement;A
Background music scene, such as home kitchen,
study, business center, etc
Drive Units: 1X2.75" Driver
requency : 45Hz-20KHz(In wall)FResponse
ower Iutput: ~ 60WP10
: 88dB/W/mSensitivity
vg. Max Output @1m A:106dB
nput Impedance: 8ΩI
nputs: BindingpostI
imensions: Φ125x103mmD
et weight: 0.83Kg (Single)N
3：Product Accessories
Note :BM3 and BM4 are standard accessories in the same shape but different sizes
1:将定位纸卡背面双面胶剥离纸撕除;
2:把定位纸卡贴合在安装区域;
3:用手锯沿定位纸卡外缘将安装区域切除;
或用开孔器将安装区域切除.
切割前检查墙壁上的障碍物！
A:Iron mesh or guided
wave panel x 1PCS
B:Screw x 2PCS
C: x 1PCSIron piece hook D:Position paper
card x 1PCS

04 05
BM3&BM4 BM3&BM4
4：M3 Finished dimension drawingB5： M4 Finished dimension drawingB
Φ112
102.7
99.7
5-37
Φ140 Φ125
背面
62
12
59
Φ86
Φ100
背面
speaker installation hole size Φ86mm.speaker installation hole size Φ112mm.

06 07
BM3&BM4 BM3&BM4
1
2
3
4
5
6
1
2
54
3
3
3
2
3
4
6
2
3
Loaded speaker into ceiling hole,held by hand and then
fixed to ceiling with a screwdriver or electric screw driver.
***Pay attention to lock in place, make sure it's not loose.
Last step put the iron mesh or guide wave panel into
speaker slot. Ensure the assembly is in place and there is
no loose phenomenon.
5：Installation instructions
A：Embedded installation (hidden installation,BM3 and BM4 are installed in the same way)
Paste the position paper card to the
corresponding position on the ceiling.
Remove this area with a blade or hole-cutter.
**Attention obstacle
Connect reserved cable with speaker terminals.
(Red is positive and Black is negative) The installation is complete.
Find the iron hook 5 and screw 6
from accessory bag.
Fix the iron hook on the back of the
speaker with a cross screwdriver or
electric driver ; Make sure the lock
is secured.
B：Installation with Rack (open installation,BM3 and BM4 are installed in the same way)
1Drill hole in the ceiling, insert cap screw
1 into the hole, and lock the screw 4 to the
ceiling, make sure it is firm.
***The length of screw 4 depends on
the distance between the equipment
and the ceiling.
Rack component：
1，Cap screw M6
2，M6 flat plate *2Pcs
3，M6 hexagon nut*4Pcs
4，M6 screw
2
***These materials are easily purchased
from hardware stores.
Twist the speaker into the end of the
screw and lock it to make sure it is firm.
Put the iron mesh or guide wave panel
into speaker slot to make sure the
assembly is in place and there is no
loose phenomenon.
3
Connect reserved cable with speaker
terminals.
(Red is positive and black is negative)
4
5，Iron piece hook
6，M3 Screw*2Pcs

08 09
BM3&BM4 BM3&BM4