Snapper C21400R2, CP21400R2, CP21550V User manual

Parts Manual fo
r
Revision 3,
21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
COPYRIGHT
©
2006
McDonough, GA, 30253 U.S.A.
TP 400-5199-3-WB-N
6/13/2006 Manual No. 7006144
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
WALK BEHIND MOWERS
PUSH MODELS PROPELLED
MODELS
C21400R2 CP21400R2
C21500KWV CP21401R2
C21501KWV CP21402R2
CP21500KWV
CP21501KWV
CP21550KWV
ECP21400R2
ECP21500KWV
ECP21501KWV
ECP21550V

Table Of Content
s
TP 400-5199-3-WB-N
Manual No. 700614421" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2 3
PAGE GROUP
4Handles & Controls
8Cutting Deck, Blade, Interlock
12 Front Wheel Bracket, Latches
14 Rear Wheel Brackets, Latches
16 Front And Rear Wheels
18 Drive System Self-Propelled
22 Transmission (Differential)
24 Throttle Controls & Engine Specs.
26 Decals
28 Adapter, Brackets
30 Accessory - Grass Bag
32 Recycling Kits
34 Accessory - Snapperizer
36 Accessory - Thatcherizer

Handles & Controls
TP 400-5199-3-WB-N
Manual No. 7006144 21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
4

Handles & Controls
Footnotes:
TP 400-5199-3-WB-N
Manual No. 700614421" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2 5
Part No Descri
p
tionItem Qt
y
Note
1 7046914 HANDLE, Upper Was 24889, Used on All
2 7024890 HANDLE, Middle Used on All
3 7033986 HANDLE, Lower Right Hand Was 33812, Used on All
4 7033985 HANDLE, Lower Left Hand Was 33811, Used on All
5 7024978 CONTROL, Blade Used on All
6 7033904 CLIP, Blade Control Used on All
7 7025036 CABLE, Blade Control Used on Briggs Engines
7027774 CABLE, Blade Control Used on Kawasaki Engines
7027393 CABLE, Blade Control Used on Robin Engines
8 7032826 HANDLE, Wheel Drive Used on Self-Propelled
9 7014307 GRIP, Wheel Drive Handle Used on Self-Propelled
10 7025013 CABLE, Clutch Pull (Z-Bend) Used on Self-Propelled
11 7012121 COVER, Vinyl Used on Self-Propelled
12 7012122 SPRING, Clutch Used on Self-Propelled
13 7038478 SECTOR, Speed Used on Self-Propelled
14 7029911 LEVER, Speed Control Used on Self-Propelled
15 7012093 SPRING, Speed Control Used on Self-Propelled
16 7090188 WASHER, 3/8" Flat Used on All
17 7023801 GRIP, Speed Control Handle Used on Self-Propelled
18 7032830 ANCHOR, Speed Control Used on Self-Propelled
19 7032408 GUIDE, Lower V-Belt Used on Self-Propelled
20 7015752 ROD, Transfer Used on Self-Propelled
21 7010937 CLIP, Transfer Rod Used on Self-Propelled
22 7091190 BOLT, 5/16-18 x 1-1/2" Curved Head Used on All
23 7012114 BUSHING, Differential Used on Self-Propelled
24 7090595 BOLT, 5/16-18 x 3/4" Flange Lock Used on Self-Propelled
25 7090238 SCREW, 5/16-24 x 1" Hex Cap Used on Self-Propelled
26 7090799 BOLT, 5-16-18 x 5/8" Carriage Was 91026 (Used on All)
27 7091601 NUT, 5/16-18 Hex Flange Lock Was 90585 (Used on All)
28 7091606 NUT, 5/16-24 Center Lock Was 91074 (Used on Self-
Propelled)
29 7023813 CLIP, Wiring Harness Used on All
30 7090545 SCREW, 5/16-24 x 1-1/2" Machine Used on All
31 7023893 DECAL, Blade Control Used on European Models
32 7091025 SCREW, 1/4-28 x 1-3/8" Hex Cap Used on Self-Propelled
33 7090053 WASHER, 1/4 Internal Tooth Lock Was 91023 (Used on All)
34 7090095 NUT, 1/4-28 Hex Was 91024 (Used on All)
35 7091022 SCREW, 1/4-28 x 1-3/4" Hex Cap Used on All

Handles & Controls
TP 400-5199-3-WB-N
Manual No. 7006144 21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
6

Handles & Controls
Footnotes:
TP 400-5199-3-WB-N
Manual No. 700614421" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2 7
Part No Descri
p
tionItem Qt
y
Note
36 7014343 BUSHING Used on All
37 7023792 PIN, Clutch Handle Used on Self-Propelled
38 7091020 NUT, Push (for handle pin) Used on Self-Propelled
39 7023886 DECAL, Wheel Control Used on European Models
40 7022460 GRIP, Foam Used on All
41 7032833 STRAP, Handle Used on All
42 7090391 WASHER, 5/16 Internal Tooth Lock Was 91068 (Used on All)
43 7090095 NUT, 1/4-28 Hex Used on Self-Propelled
44 7015753 JOINT, Ball Used on Self-Propelled
45 7024087 DECAL, Speed Selector Used on Self-Propelled
7024446 DECAL, Speed Selector Used on European Models
46 7090895 NUT, 5/16-18 Tee Used on Self-Propelled
47 7091511 NUT, 5/16-18 Hex Was 91069 (Used on All)
48 7024211 DECAL, Blade Control Used on Non-European

Cutting Deck, Blade, Interlock
TP 400-5199-3-WB-N
Manual No. 7006144 21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
8

Cutting Deck, Blade, Interlock
Footnotes:
TP 400-5199-3-WB-N
Manual No. 700614421" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2 9
Part No Descri
p
tionItem Qt
y
Note
1 7057663 DECK, Mower Was 57665 (Includes painted
deck with decals)
2 7091601 12 NUT, 5/16-18 Hex Flange Lock Was 90585
3 7090731 9 BOLT, 5/16-18 x 1/2" Short Neck Carriage
4 7091169 BOLT, 5/16-18 x 1-1/8" Short Neck Carriage
5 7090324 2 SCREW, 3/8-18 x 1" Self-Tapping (Engine Mounting)
6 7032417 SPRING, Wheel Bracket Type Interlock
8 7026175 INSULATOR, Interlock
9 7091122 6 SCREW, 1/4-20 x 1/2" Self-Tapping Was 90539
10 7090385 WASHER, #8 Tab Internal Tooth Lock
11 7090379 SCREW, #8-18 x 3/4" Hex Machine
12 7090167 SCREW, 3/8-24 x 2" Hex Head Cap (Gr. 5)
13 7012063 WASHER, Cone
14 7019795 BLADE, Cutter (20.75")
14A 7026407 BLADE, Cutter (20.75")(Quad Edge)
15 7015626 HUB, Blade Drive 25mm (Briggs & Robin)
7012927 HUB, Blade Drive 7/8" (Kawasaki)
16 7015894 KEY, 3/16 x 5/8" Woodruff (Briggs)
7016755 KEY, 1/4 x 3/4" Square (Robin)
17 7090201 SCREW, 5/16-18 x 5/16" Hex Socket Set
18 7015780 PULLEY, Engine (Briggs)
7022106 PULLEY, Engine (Robin)
7021764 PULLEY, Engine (Kawasaki)
19 7031968 SHIELD, Belt Opening Cover (Push Models Only)
20 7012135 BUSHING, Interlock Wire
21 7091508 4 BOLT, 5/16-18 x 3/4" Short Neck Carriage Was 90001
22 7011791 RETAINER, 5/16 Bolt
23 7011762 COVER, Spark Plug (Not Shown)
7060785 KIT, Air Lift (Includes items 24 thru 27); For
use with P/N 1-9795 Blade
24 7032558 2 LIFT, Air
25 7090391 4 WASHER, 5/16 Internal Tooth Lock
26 7091297 4 NUT, 5/16-24 Hex Was 90223
27 7090228 4 SCREW, 5/16-24 x 21/32" Machine
28 7041400 STRUCTURE, Fender (European Models Only)
29 7090702 BOLT, 5/16-18 x 2-1/4" Hex Flange Lock
30 7013320 BUSHING
31 7033863 COVER, Belt (European Models Only)

Cutting Deck, Blade, Interlock
TP 400-5199-3-WB-N
Manual No. 7006144 21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
10

Cutting Deck, Blade, Interlock
Footnotes:
TP 400-5199-3-WB-N
Manual No. 700614421" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2 11
Part No Descri
p
tionItem Qt
y
Note
32 7090187 WASHER, 5/16 Split Lock
33 7091511 NUT, 5/16-18 Hex Was 90196
7026471 WIRE, Interlock (Kawasaki) (not shown)

Front Wheel Bracket, Latches
TP 400-5199-3-WB-N
Manual No. 7006144 21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
12

Front Wheel Bracket, Latches
Footnotes:
TP 400-5199-3-WB-N
Manual No. 700614421" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2 13
Part No Descri
p
tionItem Qt
y
Note
1 7051885 ASSEMBLY, Arm, Left Wheel (Consists of Items 2, 3, 4, 5A, &
6)
7051886 ASSEMBLY, Arm, Right Wheel (Consists of Items 2, 3, 4, 5B, &
6)
2 7015761 BOLT, 5/16-18 x 3/4" Shoulder
3 7012325 LATCH, Height
4 7027702 GRIP, Latch
5A 7031016 ARM, Left Wheel
5B 7031017 ARM, Right Wheel
6 7011791 RETAINER, 5/16 Bolt
7 7091601 NUT, 5/16-18 Hex Flange Was 91070
8 7041666 BRACKET, Front Wheel Was 41387
9 7021119 AXLE

Rear Wheel Brackets, Latches
TP 400-5199-3-WB-N
Manual No. 7006144 21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
14

Rear Wheel Brackets, Latches
Footnotes:
TP 400-5199-3-WB-N
Manual No. 700614421" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2 15
Part No Descri
p
tionItem Qt
y
Note
1 7046983 BEARING Was 18767
2 7091012 3 SCREW, #10-32 x 3/8" Self-Tapping
3 7035717 LATCH, Height Adjusting Was 19218
4 7091604 BOLT, 1/4-20 x 1/2" Short Neck Carriage (Gr. 5) Was 90005
5 7091601 6 NUT, 5/16-18 Hex Flange Lock Was 90585
6 7052909 ASSEMBLY, Wheel Arm (Square Hole, Front Left & Rear Right) Was 51954 (Push Models)
(Includes Items 3,10,14A,15 &
17)
7 7052908 ASSEMBLY, Wheel Arm (Round Hole, Front Right & Rear Left) Was 51955 (Push Models)
(Includes Items 3,11,14A,15 8
17)
8 7054246 ASSEMBLY, Wheel Arm Was 51814 (For Rear Right Self-
Propelled Models);(Includes
Items 1,2,3,12,14B,15 & 17)
9 7054247 ASSEMBLY, Wheel Arm Was 51815 (For Rear Left Self-
Propelled Models);(Includes
Items 1,2,3,13,14B,15 & 17)
10 7031016 ARM, (Square Axle End)
11 7031017 ARM, (Round Axle End)
12 7032722 ARM, Wheel Rear Right (For Self-Propelled Models)
13 7032723 ARM, Wheel Rear Left (For Self-Propelled Models)
14A 7011078 BOLT, 5/16-18 x 1" Shoulder (For Self-Propelled Models)
14B 7015761 BOLT, 5/16-18 x 3/4" Shoulder (For Push Models)
15 7011791 RETAINER, 5/16 Bolt
16 7023791 RING
17 7027702 GRIP, Latch
18 7090053 WASHER, 1/4 Internal Tooth Lock Was 91023
19 7091576 NUT, 1/4-20 Hex Was 90063
20 7033846 BRACKET, Right Rear Wheel (For Self-Propelled Models)
21 7036242 BRACKET, Left Rear Wheel (For Self-Propelled Models)
22 7021119 AXLE, (Rear - Push Models, also Front
Axle on all Models)
23 7011780 2 RING (For Push Models)
24 7026166 GUARD, Rear Foot Was 37765 (Push Models)
25 7091809 2 PIN, 1/8 x 1-1/2" Cotter Was 90297
26 7019522 GUARD, Rear Foot (For Self-Propelled Models)
7017010 GUARD, Rear Foot (For European Self-Propelled
Models)
27 7012616 SUPPORT, Foot Guard
28 7036050 BRACKET, Right Rear Wheel (For Push Models)
29 7036049 BRACKET, Left Rear Wheel (For Push Models)
30 7091508 BOLT, 5/16-18 x 3/4" Short Neck Carriage Was 90001

Front And Rear Wheels
TP 400-5199-3-WB-N
Manual No. 7006144 21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
16

Front And Rear Wheels
Footnotes:
TP 400-5199-3-WB-N
Manual No. 700614421" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2 17
Part No Descri
p
tionItem Qt
y
Note
1 7022801 WHEEL, Rear 9.20 x 2.00 Steel Rim (For Self-Propelled Models)
7022800 WHEEL, Rear 9.20 x 2.00 Steel Rim (For Push Models)
2 7026182 WHEEL, Front 8.00 x 2.00 Steel Rim
3 7031121 HUB-CAP (Front Wheels)
7031960 HUB CAP (Rear Wheels)
4 7090377 2 NUT, 7/16-18 Hex Center Lock
5 7031961 WASHER, 7/16 Flat

Drive System Self-Propelled
TP 400-5199-3-WB-N
Manual No. 7006144 21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
18

Drive System Self-Propelled
Footnotes:
TP 400-5199-3-WB-N
Manual No. 700614421" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2 19
Part No Descri
p
tionItem Qt
y
Note
1 7012354 BELT, Poly-Vee
2 7034179 LINK, Differential Was 31880
7051921 ASSEMBLY, Clutch Idler (Includes items 3 thru 7)
3 7032832 ARM, Clutch Idler
4 7012124 2 PULLEY, Idler
5 7091025 SCREW, 1/4-28 x 1-3/8" Hex Head Cap
6 7090303 NUT, 1/4-28 Hex Lock
7 7012117 2 BUSHING, 3/8 I.D. Nylon
8 7072284 SHAFT, Hex Was 23744
9 7019383 PULLEY, Poly-V
10 7012316 WASHER, 3/8" Flat
11 7012126 SPRING, Torsion
12 7012111 STUD
13 7031873 HOLDER, Bearing (Inner Half)
14 7028014 BEARING, Ball
15 7011025 O-RING
16 7090289 NUT, 3/8-24 Hex Center Lock
17 7031809 HOLDER, Bearing (Outer Half)
18 7010937 CLIP, 1/4 Right Arc (Transfer Rod)
19 7032664 SHIELD, Hex Shaft (For European Models Only)
20 7012353 BELT, Engine Drive
7053225 ASSEMBLY, Driven Disc Was 57444 (Includes 21 thru 28)
21 7038486 PLATE, Thrust
22 7010746 RING, Retaining
23 7026693 BEARING, Ball
24 7090981 4 SCREW, #10-32 x 1/4" Self-Tapping Machine
25 7061276 ASSEMBLY, Hub Was 51616 (Includes 11108
Bushing & 90913 Screws)
26 7023364 RING, Driven
27 7031013 PLATE, Ring Retaining
28 7090913 5 SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)
29 7012125 GUIDE, Thrust Plate
30 7090390 3 WASHER, 3/8 Internal Tooth Lock
31 7090122 WASHER, 3/8" Flat
32 7091630 3 NUT, 3/8-24 Hex Was 90155
33 7091294 WASHER, 1/4 Flat Was 90055
34 7090053 WASHER, 1/4 Internal Tooth Lock
35 7015753 JOINT, Ball

Drive System Self-Propelled
TP 400-5199-3-WB-N
Manual No. 7006144 21" STEEL DECK COMMERCIAL
SERIES 0, 1 & 2
20