SodaMagic Fancy User manual

1
SodaMagic 'Fancy'
Sparkling Water Machine
Instruction Manual
Available Colours:
- Silver
- Black Matt
ENG
SodaMagic

2
Contact
SodaMagic
Room D, 7/F
Hollywood Centre
77-91 Queen's Road West
Sheung Wan
Hong Kong
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
www.SodaMagic.hk

3
Content
Parts and Features
4
Install the CO2 Cylinder
5
How to Use
6
Care and Cleaning
9
Troubleshooting
11
Important Safeguards
12
Guarantee and Registration
13

4
Parts and Features
Thank you for using our product. To properly
understand how to use this product, please read
this instruction manual before use.
What your SodaMagic 'Fancy' can do
The SodaMagic 'Fancy' combines innovative
product design with the latest technology to deliver
one of the world's best compact soda makers.
Carbonate your tap water
With the SodaMagic 'Fancy' you can make
carbonated water, personalized to your taste, in the
comfort of your home.
Before the first use
Hand wash the water bottle in warm soapy water
and rinse. Wipe outside with a soft cloth to dry.
Never wash the water bottle in dishwasher. Harsh
chemicals will damage the water bottle.
Large water bottle opening of 4.1cm
The SodaMagic 'Fancy' kit
Fizz Infuser Press Key Cylinder Connector
Main Body
Magnetic & expandable Stand
PET Water Bottle
Sparkling Water Machine
CO2 Cylinder
Scope of Delivery:
The quantity and design of the accessories may differ depending on the Special Offer being promoted.

5
Install the CO2 Cylinder
Note:
Only use SodaMagic CO2 cylinder and water
bottles. Never carbonate if the water bottle is
empty, not completely filled or not fully inserted.
1)
2)
Turn the Cylinder Connector counter-clockwise and
then pulling it up.
Remove seal and twist off the cap
from the CO2 cylinder.
3)
4)
Insert threaded part of the CO2 cylinder into the
unit receptacle and hand-tighten.
Put the Cylinder Connector into the main body
and turn clockwise.

6
How to Use
1)
2)
Remove the Fizz Infuser from the water bottle by
turning it counter-clockwise and then pulling it up.
Fill water bottle with VERY COLD water to the
Water-Symbol mark.
Only use water with other liquids such as
syrups, pulpless fruit juices etc.
WARNING! Pulped beverages may clog the
pressure release valve.
3)
4)
Put the water bottle on the magnetic stand.
Injection Tube
Place the Injection Tube exactly onto the Fizz
Infuser.

7
How to Use
5)
6)
Place the Injection Tube exactly onto the Fizz
Infuser.
Press the Press Key gently once for 1 second and
let the water and foam rest. And press 2-3 times
in total.
7)
8)
Slowly open and remove the Fizz Infuser from
water bottle by unscrewing it counter-clockwise.
Enjoy your sparkling beverage!
Cap and refrigerate the water bottle to preserve
the carbonation of the water.

8
How to Use
1)
2)
Machine in normal standing position.
Expandable stand for increased stabilization of
the machine.
Put the machine up-side-down and pull out the
expandable stand. Turn the expandable stand
clock-wise.

9
Care and Cleaning
Rinse the water bottle with clean water
after each use.
The water bottle should not be cleaned in
the dishwasher.
The water temperature shall not be higher
than +40° C (+120° F). Use mild detergent
only.
Clean the water bottle carefully and
periodically.
If you do not intend to use the water bottle
any time soon, leave the water bottle open,
letting the inside dry out completely.
To clean the carbonating unit, wipe with a damp
cloth. Do not immerse the carbonating unit in water.
Do not use any solvents or abrasive cleaners, since
this could damage the surface.
Make sure to wash the Fizz Infuser after each use
under running water. The Fizz Infuser allows you
to carbonate non-water beverages because it can
both slowly release pressure and can be easily
cleaned. This is especially important if foam came
out of the valve during use.

10
Care and Cleaning
WARNING!!!
Damaged water bottles can fail during carbonation.
Hand wash with soap and warm water. Never place
the water bottle in dishwasher. Never use brushes,
abrasives, or chemical cleaners. Replace water
bottle if it is scratched, deformed or older than 3
years since purchase.
Tips for best results
Use the coldest water possible.

11
Troubleshooting
Problem
Solution
No Carbonation
The CO2 cylinder has not been tightly installed. Tighten by
hand. If not, the carbonation button will not activate the CO2
cylinder to release CO2.
Check if the CO2 cylinder is empty. Use a brand new CO2
cylinder.
Fill the water bottle to the Water-Symbol mark.
CO2 cylinder is too cold. Wait until CO2 cylinder reaches room
temperature.
Water is too warm. Use very cold water 0.5°-5.5° C (33°-42°
F).
Slight Carbonation
CO2 did not mix well with water. Allow for 10 seconds after
CO2 was released into the water to complete mixing.
CO2 cylinder is close to empty. Use a brand new CO2
cylinder.
The CO2 cylinder is too cold. Wait until the CO2 cylinder
reaches room temperature.
The water is too warm. The colder the water temperature the
higher the carbon dioxide concentration. Use very cold water
0.5°-5.5° C (33°-42° F).
Press on the carbonation button for a longer period of time.
Water overflow from the water bottle
during carbonation
There is too much water in the bottle. Do not fill water bottle
over the suggested water level line.
During the carbonation process small
ice particles are visible
This is normal when you carbonize with very cold water. The
ice particles will disappear soon again.
Foam rises too quickly while
carbonating or releasing pressure
Use shorter carbonation bursts. Every beverage will foam
differently. If the foam is coming out when you are pressing
the Press Key, next time you carbonate that beverage: 1) Pour
less beverage to leave more room for the foam to rise up; 2)
Use shorter bursts; 3) Wait longer between each carbonation
press. This is a machine that allows you to use your own
imagination to design your own sparkling beverages and learn
to make beverages to your liking.

12
Important Safeguards
This appliance is intended for countertop use only.
1. The SodaMagic 'Fancy' is designed for making carbonated water. This device is also intended to be
used for carbonating water with other liquids such as syrups, pulpless fruit juice etc.
2. Please check the machine unit and the accessories such as the PET water bottles before each use.
If the machine or water bottle are damaged or deformed, please do not use until the defect has been
taken care of.
3. DO NOT store the water bottle, Fizz Infuser or CO2 cylinder in a freezer.
4. DO NOT store the water bottle, Fizz Infuser or CO2 cylinder near or in a stove / oven or other heat
source, such as a heated car. Also avoid strong direct sunlight.
5. If the CO2 cylinder is colder or warmer than room temperature, it must be gradually brought up to
room temperature before use. DO NOT place it in the freezer or on a heat source to accelerate the
process.
6. Inspect that the CO2 cylinder and water bottle are firmly attached before each use.
7. Replace water bottle if it is scratched, deformed or older than 3 years since purchase.
8. Never transport a unit with a full water bottle attached.
9. DO NOT make any modifications or repairs to the unit and accessories, maintenance work can only
be done by our authorized service personnel.
10. Only use the SodaMagic approved accessories, such as the water bottles and CO2 cylinders.
11. WARNING! Food Safety Hazard: Always use only food & beverage grade CO2.
12. Be aware of the foaming rate of the beverage you are carbonating. If the beverage starts generating
a lot of foam slow down your carbonation or pressure release rate and wait for the foam to settle.
13. Slowly open and remove the Fizz Infuser from water bottle by unscrewing it counter-clockwise.
14. Always place the unit on a level, stable and water-resistant surface.
15. The unit must always be upright during the operation.
16. DO NOT submerge the unit under water and do not clean while in operation.
17. Only use the unit when a filled water bottle is inserted. Never attempt to fill an empty or not
completely filled or not fully inserted water bottle with CO2.
18. Hand wash the water bottle with soap and warm water. Never place in dishwasher. Never use
brushes, abrasives, or chemical cleaners.
19. DO NOT use the water bottle if it is deformed, scratched, or discolored, or older than 3 years since
purchase.
20. WARNING: Explosion Hazard. Always store CO2 cylinders in a cool, dry place, away from any type
of heat exposure. Exposing to heat can cause the cylinder pressure to build up and release CO2
gas unexpectedly. Do not touch the cylinder if CO2 is being released; wait until all CO2 is
discharged and the cylinder has come to room temperature.
21. WARNING: Cold-burn Hazard. Discharging CO2 gas can cause skin to freeze.
22. The water bottle storage temperature range is MAX: +40°C (+120°F), MIN: +0.5°C (+34°F). Never
store outside this range.
23. Use the unit to carbonate pulp free drinks only.
24. This device is designed for personal or household use, it is not suitable for commercial use.
25. The CO2 cylinder is under high pressure.
26. Our product and its accessories must only be used by an adult or under adult supervision.

13
Guarantee and Registration
Guarantee
We have taken great care in the design, production
of our Sparkling Water Machines and delivery to
you in a perfect condition.
We offer a one year guarantee from the date of
purchase (must provide the proof of purchase),
should there be any fault. We will either repair or
replace the Sparkling Water Machine free of
charge.
If the damages are caused due to improper
handling or unauthorized disassembly and repair,
the guarantee will be voided.
Our products are constantly being improved and
enhanced, some specifications are subject to
change without notice.
Product Warranty Registration
Registering online is quick and easy!
Please register your Sparkling Water Machine
under: www.SodaMagic.hk

14
Authorized Retail Partners and CO2 Refills in Hong Kong
SodaMagic
Room D, 7/F
Hollywood Centre
77-91 Queen's Road West
Sheung Wan
Hong Kong
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
www.SodaMagic.hk
SodaMagic