Solaris LCD1U19-04 User manual

Toll Free: 1-888-865-6888
Tel: [phone] Fax: [phone]
Email: [email protected]

17” / 19” LCD 1152 x 900 Native Resolution
Options :
- DC power
User Manual
1U SUN LCD Console Drawer
LCD1U17-13 / LCD1U19-04

Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
www.rackmountmart.com

< Part. 3 > Options
3.1 48V, 24V or 12VDC power P.14
< Part. 2 > Specifications / OSD
2.1 Product Specifications
2.2 Keyboard / Mouse Specifications
2.3 On-screen Display Operation ( OSD )
P.8 - 9
P.10 - 11
P.12 - 13
< Part. 1 >
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Installation
1.4 Connection
Contents
P. 1
P.1 - 2
P.3 - 5
P.6 - 7
www.rackmountmart.com
LCD1U17-13 / LCD1U19-04

< Part. 4 > KVM Integration
Contents
Matrix
Cat6 KVM Local Remote 8-port 16-port 32-port
111
112
110
120
Matrix
DB-15 KVM Local Remote 8-port 16-port 32-port
111
112
110
120
DVI-D
KVM Local Remote 12-port - -
Combo
Cat6 KVM Local Remote 8-port 16-port 32-port
101
110
Combo
DB-15 KVM Local Remote 8-port 16-port 32-port
101
110
USB Hub
DB-15 KVM Local Remote 8-port 16-port 32-port
101
110
www.rackmountmart.com
- -MUIP163IP -MUIP323IP
- -MUIP164IP -MUIP324IP2
- -MU162 -MU322
- -MU163 -MU323
1 3 0 - -MU164 -MU324
-M83 -M163 -
1 3 0 -M84 -M164 -
1 0 0 -12DVI - -
-U8KVM2 -U16KVM2 -U32KVM2
1 0 0 -U8KVM -U16KVM -U32KVM
-8KVM2 -16KVM2 -
1 0 0 -8KVM-u -16KVM-u -
-H8KVM2IP -H16KVM2IP -
-H8KVM2 -H16KVM2 -
1 0 0 -H8KVM -H16KVM -
-8KVM2IP -16KVM2IP -
-M82 -M162 -
-M84IP2 -M164IP2 -
-M83IP -M163IP -
-U8KVM2IP -U16KVM2IP -U32KVM2IP

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4
www.rackmountmart.com

6
1
2
5
LCD interchangeable module kit
Installation Slides
LCD membrane
Membrane switch (KVM option)
Micro switch for screen auto power off
1
2
3
6
7
7
8
Keyboard interchangeable module kit
Mouse interchangeable module kit
Blue Power LED
Front USB port for device access ( USB Hub KVM only )
Molded front handle
4
3
8
9
10
4
10
5
9
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
The above package content is only for the single console models.
It varies with options such as KVM & DC power.
< 1.1 > Package Content
P. 1
< Part 1 >
< 1.2 > Structure Diagram
www.rackmountmart.com
- LCD-A3004 6ft DVI-D console cable X 1
( Alternative : LCD-A1014 6ft VGA console cable )
LCD1U17-13 or LCD1U19-04 unit X 1

Front View
< 1.2 > Dimension
Model Product Dimension
(W x D x H)
Net
Weight
441.6 x 460 x 44 mm
17.4 x 18.1 x 1.73"
12 kg
26 lb
441.6 x 500 x 44 mm
17.4 x 19.7 x 1.73"
13 kg
29 lb
The weight is only for the single console models. It varies with accessories & options
such as KVM & DC power.
P. 2
Side View UNIT : mm
1mm = 0.03937 inch
Top View
www.rackmountmart.com
LCD1U17-13
LCD1U19-04

< 1.3 > Installation - How to install Installation Slides
■Fix the LCD console drawer into the rack.
Complete the installation
Step 3
■Insert the left and right rear mounting brackets into
the LCD console drawer.
Step 1
P. 3
Step 2
■Measure the depth of the front and rear mounting rails.
■Align each rear mounting bracket to a suitable length.
M6 screw, cage nut & cup washer x 8 are provided.
www.rackmountmart.com

Step 1
■Release front mounting ears before applying 2 post
rack brackets.
■Insert rear mounting brackets into the LCD console
drawer.
< 1.3 > Installation - How to install 2 post rack brackets
Step 2
■Align each rear mounting bracket to a suitable length.
■Fix the LCD console drawer into the 2 post rack.
Complete the installation
Step 3
P. 3
M6 screw, cage nut & cup washer x 8
are not provided.
Rear mounting
Front mounting
P. 4
www.rackmountmart.com
Optional: Call for details

P. 5
■Hold the handle and slide out the
drawer.
■Operate the LCD console drawer.
■Flip up the LCD to a suitable angle.
< 1.3 > Installation- How to use the drawer
www.rackmountmart.com

DVI-D KVM
DVI-D
LCD Console Drawer
USB server
P. 6
DVI console KVM
LCD Console Drawer
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
KVM
console cable
Power
Power
DVI-DUSB
console cable
DVI-D USB
www.rackmountmart.com
< 1.4 > Connection to USB Server via LCD-A3004 cable
< 1.4 > Connection to external KVM via LCD-A3004 cable
LCD-A3004 DVI-D
LCD-A3004 DVI-D

USB server
P. 7
KVM
KVM
LCD Console Drawer
LCD Console Drawer
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
console cable
Power
Power
USB console KVM
VGAUSB
USB VGA
console cable
www.rackmountmart.com
< 1.4 > Connection to USB Server via LCD-A1014 cable
< 1.4 > Connection to external KVM via LCD-A1014 cable
LCD-A1014 VGA
LCD-A1014 VGA

< 2.1 > Product Specifications
Audio
Connectivity Audio Input Connector 3.5mm stereo jack
Impedance / Power level 30kΩ/ 750mV
Audio Output Connector 3.5mm stereo jack
Resistance / Power level 30kΩ/ 2.8V
Speaker Output Power 2 x 2W
*When the audio output is connected, speaker output is OFF
Video
Connectivity Digital HDMI HDMI 1.1, CEA-861-D
DVI DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption Screen display ON 25W or less
Power saving mode 4W or less
Power button OFF 1W or less
Regulatory Safety Approval cUL, FCC & CE
LCD
Panel Manufacturer
Panel Size ( diagonal ) 17-inch TFT color LCD 19-inch TFT color LCD
Display pixel ( dots x lines ) 1152 x 900 ( Direct ) 1152 x 900 ( Direct )
1280 x 1024 ( Native ) 1280 x 1024 ( Native )
Brightness ( typ. ) 250 250
Contrast Ratio ( typ. ) 1000:1 1000:1
Color 16.7 M 16.7 M
Viewing Angle ( L/R/U/D ) 80/80/80/80 80/80/80/80
Response Time ( ms ) 5 5
Dot pitch ( mm ) 0.264 0.294
Display Area ( mm ) 337.92H x 270.33V 376.32H x 301.05V
Surface treatment Haze 25%, Hard-coating
Surface hardness 3H 3H
Backlight Type CCFL CCFL
MTBF ( hrs ) 50,000 50,000
P. 8
< Part 2 >
www.rackmountmart.com
17 19

Physical
Specification
Product ( W x D x H ) 441.6 x 460 x 44 mm 441.6 x 500 x 44 mm
17.4 x 18.1 x 1.73 inch 17.4 x 19.7 x 1.73 inch
Net Weight 12 kgs / 26 lbs 13 kgs / 29 lbs
Applicable
Format DVI-D / VGA Input PC Signal 1152 x 900 x 66Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P. 9
Environmental
Conditions Operating Temperature 0 to 50°C degree
Humidity 20~90%, non-condensing
Storage Temperature -5 to 60°C degree
Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
www.rackmountmart.com
17 19

■Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
■104 key notepad keyboard with full numerical pad and SUN function
■USB interface
S keyboard integrated with touchpad / trackball
Supporting layouts
America
United States
Key force 55 ± 5g
Travelling distance 3 ± 0.3mm
Switch life > 10 million life cycle time
Software support MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC
Linux / Mac / SUN system
Num Cap s Scro l l Comp oseNum Cap s Scro l l Comp ose
< 2.2 > Keyboard / Mouse Specifications
P.10
S keyboard integrated with trackball
Sb
S keyboard integrated with touchpad
Se
www.rackmountmart.com

< 2.2 > Keyboard / Mouse Specifications
P. 11
Audio / Display Keys * Please ask your supplier for full details
F9
Audio : Mute
Display : Degauss
F11
Audio : Decrease volume
Display : Decrease contrast
F12
Audio : Increase volume
Display : Increase contrast
Num LED in Green mode
Key pad behaves as a normal key
pad mode
Num LED in Off mode
Key pad behaves as a SUN Solar
system administration command mode
How to Use "S" Keyboard
www.rackmountmart.com

Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Scroll through menu options and adjust
the displayed control
Display the OSD menu
Act as an Enter key to select screen setting options
Turn the monitor on or off
Membrane Switch Function
Remark : All LED touch buttons in WHITE light.
The LED of Power touch button will flash continuously when there is no signal input.
All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power ).
Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).
1
2
< 2.3 > On-screen Display Operation ( OSD )
P.12
www.rackmountmart.com

< 2.3 > On-screen Display Operation ( OSD )
P.13
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
www.rackmountmart.com

KVM
DVI-D
( 1 ) Option excludes 1 x power cord and 1 x AC power adapter.
( 2 ) LCD1U17-13 depth will be extended from 460mm ( 18.1” ) to 530mm ( 20.9” )
( 3 ) LCD1U19-04 depth will be extended from 480mm ( 18.9” ) to 570mm ( 22.4” )
*** For DC power option :
DC power
Model 12V 24V 48V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V
Input current
- No load 50 mA 50 mA 50 mA
- Full load 4950 mA 2450 mA 1220 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A
Efficiency 84% 85% 85%
< 3.1 > Options : DC Power
P.14
< Part 3 >
www.rackmountmart.com
The company reserves the right to modify product specifications without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2012 Synergy Global Technology Inc. All rights reserved.