Solid Signal LCD-500 User manual

English
Installation Instruction
UNPACKING INSTRUCTIONS
! Carefully open the carton, remove contents and lay out on cardboard or other
protective surface to avoid damage.
! Check package contents against the Supplied Parts List in the next page to assure
that all components were received undamaged. Do not use damaged or defective
parts.
! Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before
beginning the installation, and carefully follow all instructions contained herein. Use
proper safety equipment during installation.
!Please call a qualified installation contractor for help if you don't understand these
directions or have any doubts about the safety of the installation.
Do not use this product for any purpose or in any configuration not explicitly specified
in this instruction. We hereby disclaims any and all liability for injury or damage
arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
1
Monoprice Adjustable Tilting Desk Mount Bracket
Model: LCD-500 (PID#5400)
VESA Compliant up to 100x100
Max Weight: 33lbs

Supplied Par ts List
2
CAUTION!
WARNING
!This TV Desk mount must be securely attached to
the horizontal desk. If the mount is not properly
installed it may fall, resulting in possible injury
and/or damage.
Tools Required Phillips Screwdriver
(1) Desk Bracket Assembled-a
(4)M4 Space-f
(4)M4x12 Bolt-c (4)M4x30 Bolt-d (8)M4 Washer-e
(1)Mornitor Bracket-b
(1)Safety Knob-g

Step 1 Mounting the Bracket to the Desk
3
Make the tube extension by
loose and fasten the knob

4
Step 2 Mounting the Monitor Bracket to a TV
Step 3
Thanks for choosing our products, enjoy the using.
Attaching TV to Desk Bracket and Adding the Knob
g
For Flat Back TV For Curved Back TV
c
This way up!
deef
This way up!
e