GEM LZ-GL600 User manual

LZ-GL600 Bracket
In-swing doors
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-LZ-GL600 Ver. E Published on 2011.09.08
Application of the Electromagnet:
GL600-S
Unit:mm
21
6 7 Finish
4
5
3
Power
43
203
40
203
48
8
55.5
5
42
48
203
6
50.5
203
44
Installation of LZ bracket on In-swing Doors
Install L bracket on the door frame.
M a k e s u r e t h e d o o r m a y b e
opened/closed.
Fas t en the electr o magnet to L
bracket with fixing screws.
Assemble Z bracket. Make sure it is
still loose.
Insert th e guide pi n s into the
armature plate.
Fasten the armature plate to Z
bracket. Insert the rubber washer
between them.
Close the door and turn on the
power.
L e t t h e a r m a t u r e p l a t e a n d
electromagnet bond together. Press
Z bracket to the door leaf.
Fasten Z bracket to the door leaf.
Minimal:51mm
L-Bracket
Z-Bracket
In-swing
Frame
Door
Armature
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw