SONIQ AWM2302 User manual

Instruction Manual
www.soniq.com
Fixed Flat Panel Wall Mount
AWM2302
Printed in China

NOTE: Read the entire instruction manual before installing and assembling.
Component Checklist
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any
parts are missing or faulty, telephone your local distributor for a replacement.
Package W
Package M
WARNING
• This mounting bracket was designed to be installed and utilised ONLY as specified in this manual. Improper
installation of this product may cause damage or serious injury.
• Any person installing this product must have at least a minimum level of building and constructing knowledge.
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached
hardware and components.
• Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the items, This greatly reduces
their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal
injury.
The installer must be fully aware of the position of any electrical wiring, plumbing or other typical building construction
materials that may be hidden in the wall where this bracket is intended to be installed. Drilling into or contact with an
unknown space can result in being electrocuted and possible death or damage to the building structure or amenities.
M5x12 BM(x4)
M-B
M4x12 BM(x4)
M-A
M6x12 BM(x4)
M-C
D5 washer(x4)
Ø5.2xØ10x1mm
M-D
D6 washer(x8)
Ø6.5xØ16x1.6mm
W-C
concrete anchor(x4)
W-B
ST6.3x55(x4)
W-A
wall plate(x1)
A
adaptor bracket(x2)
B
bubble level(x1)
C

IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any
parts are missing or faulty, telephone your local distributor for a replacement.
• This mounting bracket was designed to be installed and utilised ONLY as specified in this manual. Improper
installation of this product may cause damage or serious injury.
• Any person installing this product must have at least a minimum level of building and constructing knowledge.
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached
hardware and components.
• Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the items, This greatly reduces
their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal
injury.
The installer must be fully aware of the position of any electrical wiring, plumbing or other typical building construction
materials that may be hidden in the wall where this bracket is intended to be installed. Drilling into or contact with an
unknown space can result in being electrocuted and possible death or damage to the building structure or amenities.
1. Solid Brick and Concrete Mounting
2. Install the Adaptor Brackets
Installers must verify that the supporting surface will safely support the combined weight of the equipment and all
attached hardware and components.
WARNING
C
A
W -B
W - A
W - C
C
A
X X
√
ø10 m m
( )ø3/8"
2
1
Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
• Position the adaptor brackets as close as possible to the center of the TV.
• Screw the adaptor brackets onto the TV.
Tighten all screws but do not over tighten.
Mark the exact
location of
mounting holes
Drill pilot holes
Screw the wall
plate onto the
wall

Tighten the bottom bolts to secure the adaptor brackets to the wall plate firmly.
wall
bolt
wall
3. Hang the TV onto the Wall Plate
CAUTION: DO NOT EXCEED RATED
LISTED WEIGHT CAPACITY. SERIOUS
INJURY OR PROPERTY DAMAGE MAY
OCCUR!
75x75
100x100
200x100
200x200
43"
MAX 40kg
(88lbs)
RATED
HOTLINE
• AUSTRALIA : 1300 765 663
• NEW ZEALAND : 0800 100 236
Maintenance
• Check that the bracket is secure and safe to use at regular intervals(at least every three months).
• Please contact your dealer if you have any questions.
AWM2302