
To
Tori
No test signal is better than her music
and no test instrument better than the
humanear.
Campion should be placed in an open space away from moisture and with
adequate ventilation.
The device is connected to the mains via an IEC mains lead which is provided with
your Campion amplifier.
The IEC socket on the rear of the device has a replaceable fuse; see the
specifications at the end of this manual for correct values.
Be sure that all appliances are turned off before disconnecting or connecting
anything.
Campion has five inputs; Tp, CD, DIR, L1, L2 (Phono) and one output; LnOut.
We recommend using DIR for best sonic performance. Tp, L1 should be used for
line level signals e.g. Tape source. CD input is provided for high output level CD
players. L2 is the phono input together with the earth stud, do not use this input for
any other source.
Beware, do not have the Tape Source selected when LnOut is connected to it whilst
recording as this will result in a very nasty experience.
For best loudspeaker connection use 4 mm banana plugs or spade connectors and
be sure never to short positive and negative wires as this could have a detrimental
effect on your speakers and your amplifier.
The controls on the front panel are, from left to right; Power, Source select and
Volume.
When cleaning your Campion never use solvents. A clean dry cloth would be
adequate.
Please note that there are no user serviceable parts inside the device and you
should refer any problems to your dealer. Tampering with the device may void
your warranty.