Sony BDP-BX58 User manual

Sony Corporation
Home Entertainment Business Group
SERVICE MANUAL
9-890-745-11
2010L6900-1
© 2010.12
Published by Design Engineering Dept.
BLU-RAYDISC / DVD PLAYER
Ver. 1.0 2010.12
BDP-BX58/S480/S483/S580
RMT-B109A/B109P/B110A/B110P
SPECIFICATIONS
System
Laser: Semiconductor laser
Inputs and Outputs:
(Jack name:Jack type/Output level/Load impedance)
HDMI Out :
HDMI 19-pin standard connector
Component Video out:
(Y, PB, PR
Phono jack/Y: 1 0 Vp-p/
PB, PR: 0 7 Vp-p/75 ohms
Phono jack/1 0 Vp-p/75 ohms
LAN (100):
100BASE-TX Terminal
USB:
USB jack Type A (For connecting a USB memory,
General
Power requirements:
120V AC, 60Hz (US, CND)
220 – 240V AC, 50/60Hz (AEP,UK, AUS,RUS,)
Powerconsumption:
20W (BDP-S480/S483)
Dimensions (approx.):
430 mm × 199 mm × 36mm
(17 in × 7
4/5in × 17/16 in.)
(width/depth/height) incl projecting parts
Mass (approx.):
gk71
Operating temperature:
5 ºC to 35 ºC(41 F to 95 F)
Operating humidity:
25 % to 80 %
Supplied accessories:
Specifications and design are subject to change
without notice
•Audio/video cable (phono plug ×3) (1)
•Remote commander (remote) (1)
•Size AA (R6) batteries (2)
Photo: BDP-S480
Remote : RMT-B109A
•HDMI cable (1) (BDP-BX58:US)
(BDP-S480:US/S580:US/BX58:US)
ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks. ENERGY STAR is a
registered mark owned by the U.S. government.
US Model
Canadian Model
Saudi Arabia Model
Latin America Model
Korean Model
Indian Model
Brazilian Model
Taiwan Model
AEP Model
UK Model
Australia/NZ Model Argentina Model
Middle East Model
memory card reader,digital still camera and digital
video camera)
•(1) (BDP-S480 : TW only)
LAN cable
(Except AEP,UK,E,AR,KR,IN,TW,BR)
22W (BDP-S580)
110 – 240V AC, 50/60Hz (E,AR,BR,EA,KS,IN)
110V AC, 60Hz (TW)
) :
Line Out R-Audio-L:
Phone jack/2 Vrms/10 kilohms
Digital Out(Coxial):
Phono jack/0 5 Vp-p/75 ohms
BDP-S480
BDP-S480/S580/BX58
BDP-S480/S580
ºº
TM
BDP-S580
BDP-S480/S483
BDP-S480/S580
220V AC, 60Hz (KR)
Russian Model
Wireless(BDP-S580/BX58 only)
IEEE 802 11 b/g/n
Frequency Range:
Wireless LAN standard:
2 4GHz Band:Channels 1-11(US, CND)
Modulation:
DSSS and OFDM
2 4GHz Band:Channels 1-13 (OTHERS)
Line Out Video:

– 2 –
BDP-BX58/S480/S483/S580
SAFETY CHECK-OUT
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes).
Leakage current can be measured by any one of three methods.
1. Acommercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers' instructions to use these
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operatedAC voltmeter. The “limit” indication
is 0.75V, so analog meters must have an accurate low-voltage
scale.The Simpson 250andSanwaSH-63Trdare examplesof a
passive VOM that is suitable. Nearly all battery operated digital
multimeters that have a 2VAC range are suitable (See Fig.A)
1. Check
thearea of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Checktheinterboardwiringtoensurethatnowiresare“pinched”
or contact high-wattage resistors.
3. Lookforunauthorizedreplacementparts,particularlytransistors,
that were installed during a previous repair. Point them out to
the customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs
of deterioration. Point them outto the customer and recommend
their replacement.
5. Check the line cord for cracks and abrasion. Recommend the
replacement of any such line cord to the customer.
6. Check the B+ voltage to see it is at the values specified.
7. Check the antenna terminals, metal trim, “metallized” knobs,
screws,andall otherexposedmetal partsforAC leakage. Check
leakage as described below.
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
1.5k Ω 0.15µF(0.75 V)
Parts on Set
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
•Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
•Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
CAUTION:
The use of optical instrument with this product will increase eye
hazard
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radia-
tion exposure.
ARN NG
educe sk ri
donote osethis pparatus
n or moist re.
i e ctr cal sh ck, do not
a inet Refe i gt
ied pe s nnel only
e o t lik
CAUTION
Theuseo
azar As he
s lu r y D s
armf l t eyes, do not a empt to
isassemble the cabi et.
f
ersonn l nly
This label is located on the laser
protective housing inside the
enclosure.
Th s appliance is classi ed as a
C S LA u
CLAS 1 LAS PROD CT
r .
(Except US Canadian E)
United ing om a d
p l c o r l
A molded p u
BS1363 is t d to this equipment
o y ur safe y nd c nven ence.
d
sup lied n ed to bereplaced a 5
AMP fuse approv d byAS A or
B I to BS1362 (i.e , marked with
s b u .
If the plug s ppl ed with this
ove I y u l th
cover please c ntact your nearest
you w l he prevent potential
n g qu e o
environment and hum n he
which could otherw se be caused
byinappro r at
t i T
recycling o this pro u
y c c O ce
you h use ld st sal
pu a ed the prod ct
Disp
tt
his
By
pre
elec
thes
a
batt r
wast
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 25 cm FROM THE SURFACE OF THE OBJEC-
TIVE LENS ON THE OPTICAL PICK-UP BLOCK.
For customers in European countries
product. The CLASS 1 LASER PRODUCT
MARKING is located on the rear exterior.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK OR DOTTED LINE WITH
MARK ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE-
MENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

– 3 –
TABLE OF CONTENTS
1. SERVICE NOTE
1-1. Disc Removal Procedure If The Tray Cannot Be
Ejected (Forced Ejection)............................................. 1-1
1-2. Work when optical device are replaced........................ 1-1
1-3. Test Disc....................................................................... 1-2
1-3-1. Operation and Display............................................. 1-2
1-4. Drive Repairing............................................................. 1-15
1-4-1. Preparation.............................................................. 1-15
1-4-2. Checking Flow ~ Drive (BU) section ~ .................... 1-15
1-4-3. BU Check Flow [zz] ~.............................................. 1-16
1-4-4. BU (Optical Block) Repair Guide............................. 1-16
1-4-5. BU Adjustment Flow [yy] ~...................................... 1-17
1-4-6. KEM-470AAA/C2RP Packing Spec. ....................... 1-17
1-4-7. KEM-470AAA/C2RP Packing.................................. 1-18
1-4-8. BU Data Decode Jig................................................ 1-19
1-4-9.
Loading For Service
.........................................
1-20
1-4-10. Laser Caution Label................................................ 1-20
2. DISASSEMBLY
2-1. Disassembly Flow ........................................................ 2-1
2-2. Upper Case.................................................................. 2-1
2-3. Tray Cover Assy .......................................................... 2-2
2-4. Front Panel Assy, FL-203 and IF-170 Board.... ............... 2-2
2-5. Rear Panel Block ......................................................... 2-3
2-6. MB-139 Board ............................................................. 2-3
2-7. BD Drive
.....................................................................
.. 2-4
2-8. Switching Regulator..................................................... 2-5E
3. BLOCK DIAGRAM
3-1. Overall Block Diagram.................................................. 3-1
3-2. DSP Block Diagram...................................................... 3-2
3-3. AV OUT Block Diagram................................................ 3-3
3-4. USB/ETHER, Block Diagram .................................. 3-4
3-5. Power Block Diagram .......................................... 3-5E
4. SCHEMATIC DIAGRAM
4-1. This Note Is Common For Schematic Diagrams.......... 4-1
4-2. Frame Schematic Diagram........................................... 4-2
4-3. IF-170 Board (FRONT RIGHT) Schematic Diagram ... 4-3
4-4. IF-170 Board (USB FRONT) Schematic Diagram ...... 4-4
4-6. MB-139 Board (DDR 3 A)
Schematic Diagram (1/17)............................................ 4-6
4-7. MB-139 Board (DDR 3 B)
Schematic Diagram (2/17)............................................ 4-7
4-14. MB-139 Board (AUDIO)
Schematic Diagram (9/17)............................................ 4-14
4-15. MB-139 Board (VIDEO)
Schematic Diagram (10/17).......................................... 4-15
4-16. MB-139 Board (GPIO/JTAG)
Schematic Diagram (11/17).......................................... 4-16
4-17. MB-139 Board (IF CON)
Schematic Diagram (12/17).......................................... 4-17
4-18. MB-139 Board (FE OP/GIO)
Schematic Diagram (13/17).......................................... 4-18
4-19. MB-139 Board (FE_POWER/MOTOR DRIVE)
4-23. Waveforms ................................................................... 4-23E
5. PRINTED WIRING BOARD
5-1. This Note Is Common For Printed Wiring Boards........ 5-1
5-2. FL-203 Board (REAR) Printed Wiring Board.... 5-2
5-3. IF-170 Board
Printed Wiring Board ...................................................... 5-3
5-4. MB-139 Board(MAIN)
Printed Wiring Board (Side A) ..................................... 5-4
5-5. MB-139 Board (MAIN)
Printed Wiring Board (Side B)...................................... 5-5E
6. IC PIN FUNCTION DESCRIPTION................... 6-1
7. SERVICE MODE..................................................... 7-1
8. ERROR LOG LIST................................................. 8-1
9. TROUBLESHOOTING............................................. 9-1
10. REPAIR PARTS LIST
10-1. Exploded Views............................................................ 10-1
10-1-1. Case Section........................................................... 10-1
10-1-2. ........................................... 10-2
10-1-3. Main Chassis Section
............................................................. 10-3
10-1-4. BD Section .......................................................... 10-4
Accessories
10-2. Electrical Parts List....................................................... 10-5
BDP-BX58/S480/S483/S580
Schematic Diagram (14/17) ........................................ 4-19
4-11. MB-139 Board (USB) Schematic Diagram (6/17)......... 4-11
4-12. MB-139 Board (HDMI)
Schematic Diagram (7/17)............................................ 4-12
4-13. MB-139 Board (ETHERNET)
Schematic Diagram (8/17)............................................ 4-13
2-9. Circuit Boards Location................................................ 2-5E
1-5. Rear Panel Assembly Caution...................................
1-23E
egaPeltiTnoitceS egaPeltiTnoitceS
1-3-2. Main functions ......................................................... 1-9
4-9. MB-139 Board (POWER 2)
Schematic Diagram (4/17)............................................ 4-9
4-10. MB-139 Board (FLASH/HOST)
Schematic Diagram (5/17)............................................ 4-10
4-8. MB-139 Board (POWER)
Schematic Diagram (3/17)............................................ 4-8
4-5. FL-203 Board (POWER)
Schematic Diagram ... 4-5
4-20. MB-139 Board (DC FAN)
Schematic Diagram (15/17).......................................... 4-20
4-21. MB-139 Board (VIDEO IN OUT)
Schematic Diagram (16/17).......................................... 4-21
4-22. MB-139 Board (SATA)
Schematic Diagram (17/17) ........................................ 4-22

1-1
BDP-BX58/S480/S483/S580
SECTION 1
SERVICE NOTE
1-1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. Remove the upper case. (Refer to page 2-1)
2. Insert a clip in the hole of a drive and open a tray.
Note
1-2. Work when optical device are replaced
Note: Please do the following work when you replace the optical device.
1. Install it in PC after downloading two set of software from following URL.
(Refer to “1-4-8. BU Data Decode Jig” on page 1-19)
STEP 1
Microsoft .NET Framework Version 2.0 Redistributable Package (x86)
http://www microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5
STEP 2
Microsoft .NET Framework 2.0 Service Pack 1 (x86)
http://www microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3-aacf-a7633f706ba5
2. Take a photograph of the bar code on the optical device. The valid bar code photo as shown in Fig.2
3. Drag-and-drop the bar code photograph to the icon of decode software (BDPRdec).
* The decode software is a complete set of “BDPRdec”, “Tasman.Bars.dll”, and “SavePath”.
* Because decode software cannot be attached, it separately distributes it.
4. Input the password when you start decode software.
* Inquire of each service headquarters because the password cannot be disclosed.
5. Write the decode data to the set.
(Refer to “1-4-4. BU (Optical Block) Repair Guide” on page 1-16 and “1-4-5. BU Adjustment Flow [yy]” on page 1-17)
tray
Fig.2
Fig.1
(Use clip diameter about 1.2 mm)
hole
(12~32)mm
clip

1-2
BDP-BX58/S480/S483/S580
1-3. TEST DISC
Part No. Description Layer
J-6090-199-A BLX-104 Single Layer
J-6090-200-A BLX-204 Dual Layer
J-2501-307-A CD (HLX-A1)
J-2501-305-A HLX-513 Single Layer (NTSC)
J-2501-306-A HLX-514 Dual Layer (NTSC)
J-6090-077-A HLX-506 Single Layer (PAL)
J-6090-078-A HLX-507 Dual Layer (PAL)
1-3-1. Operation and Display
Check Items
1) BLX-104
1. Select 23.976Hz/1080p
2. Play “4.Motion pictures”
3. Check whether player can play back or not
4. Check each outputs
Video:
Composite/component/HDMI
Audio:
Digital out (Coaxial/Optical)/Audio out/5.1Ch output
* When 1080/24p monitor is nothing, 1080i (59.94Hz or 50Hz) can use instead of 1080/24p.
However this is temporary correspondence.
2) BLX-204
1. Select 1080i (59.94Hz or 50Hz)
2. Play “4.Motion pictures”
3. Check whether player can play back or not
(Check the picture and sound output)
3) CD (HLX-A1)
Check whether player can play back or not
(Check the sound output)
4) HLX-513/514 (NTSC), HLX-506/507 (PAL)
1. After displayed Main Menu, select “1.Video”
2. Play “1.Color Bar 100%”
(Check the picture and sound output)
3. Return to Menu
4. Play “Demonstration 4:3” or “5.Demonstration 16:9”
(Check the picture and sound output)

1-3
BDP-BX58/S480/S483/S580
1-3-1-1. BLX-104 Menu Function (1)
Main Menu
X
1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed.
1-3-1-2. BLX-104 Menu Function (2)
Main Menu
Sub_menu1 is displayed
To Main Menu after playback from T2_C1 to T19_C1
To Main Menu after playback of T20_C1
To Main Menu after playback of T21_C1
Sub_menu3 is displayed
To Main Menu after playback from T54_C1 to T60_C1
To Main Menu after playback of T61_C1
To Main Menu after playback of T62_C1
* When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively dis-
played.
* When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.
* 5. AV Sync does not operate.
Note:
Txx_ Cxx
Chapter No.
Title No.

1-4
BDP-BX58/S480/S483/S580
1-3-1-3. BLX-104 Menu Function (3)
Main Menu
To Main Menu after playback from T23_C1 to T40_C1
To Main Menu after playback of T41_C1
To Main Menu after playback of T42_C1
Sub_menu2 is displayed
To Main Menu after playback from T44_C1 to T50_C1
To Main Menu after playback of T51_C1
To Main Menu after playback of T52_C1
Sub_menu4 is displayed
* When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively dis-
played.
* When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively
displayed.
* 5. AV Sync does not operate.

1-5
BDP-BX58/S480/S483/S580
1-3-1-4. BLX-104 Menu Function (4)
Sub menu1
1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% tReturn to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selec-
tively displayed on Sub menu1 screen.
3) Selection of 2. Color Bar 75% tReturnto Sub menu1 after seamless playback fromT1_C2 to T1_C13. 1. Color Bar 100% is selectively
displayed on Sub menu1 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) AtthedisplayofSubmenu1,MainMenuisselectedtJumptoMainMenu.AtthedisplayofMainMenu,1.VideoSignalof59.94Hz/1080i
is selectively displayed.
6) Selection of LPCM Audio tPlayback from T2_C1 to T19_C1. SubPic that corresponds toAudio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
7) Selection of Dolby AC-3 Audio tPlayback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
8) Selection of Motion Picture tReturn to Sub menu1 after playback of T21_C1. 1. ColorBar 100% is selectively displayed on Sub
menu1 screen.
9) At the selection of Main Menu, 1. VideoSignal of 1080/59.94i of Main Menu is selectively displayed.
10) AV Sync does not operate.

1-6
BDP-BX58/S480/S483/S580
1-3-1-5. BLX-104 Menu Function (5)
Sub menu2
X
X
X
X
X
X
1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% tReturn to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is
selectively displayed on Sub menu2 screen.
3) Selection of 2. Color Bar 75% tReturn to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu2 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu2, Main Menu is selected tJump to Main Menu. At the display of Main Menu, 1. Video Signal of
23.976Hz/1080P is selectively displayed.
6) Selection of LPCM Audio tPlayback from T44_C1 to T50_C1. SubPic that corresponds toAudio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
7) Selection of Dolby AC-3 Audio tPlayback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
8) Selection of Motion Picture tReturn to Sub menu2 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub
menu2 screen.
9) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.
10) AV Sync does not operate.

1-7
1-3-1-6. BLX-104 Menu Function (6)
Sub menu3
X
X
X
X
X
X
1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% tReturn to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is
selectively displayed on Sub menu3 screen.
3) Selection of 2. Color Bar 75% tReturn to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu3 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu3, Main Menu is selectedtJump to Main Menu.At the display of Main Menu, 1. Video Signal of 50Hz/1080i
is selectively displayed.
6) Selection of LPCM Audio tPlayback from T54_C1 to T60_C1. SubPic that corresponds toAudio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
7) Selection of Dolby AC-3 Audio tPlayback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
8) Selection of Motion Picture tReturn to Sub menu3 after playback of T62_C1. 1. Color Bar 100% is selectively displayed on Sub
menu3 screen.
9) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.
10) AV Sync does not operate.
BDP-BX58/S480/S483/S580

1-8
1-3-1-7. BLX-104 Menu Function (7)
Sub menu4
X
1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% tReturn to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is
selectively displayed on Sub menu4 screen.
3) Selection of 2. Color Bar 75% tReturn to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu4 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) AtthedisplayofSubmenu4,MainMenuisselectedtJumptoMainMenu.Atthedisplayof MainMenu,1.VideoSignalof 59.94Hz/720P
is selectively displayed.
6) Selection of LPCM Audio tPlayback from T44_C1 to T50_C1. SubPic that corresponds toAudio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
7) Selection of Dolby AC-3 Audio tPlayback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
8) Selection of Motion Picture tReturn to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub
menu4 screen.
9) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.
10) AV Sync does not operate.
BDP-BX58/S480/S483/S580

1-9
1-3-2-1. BLX-204 Menu Function (1)
Main Menu
1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed.
1-3-2-2. BLX-204 Menu Function (2)
Main Menu
Sub_menu1 is displayed
To Main Menu after playback from T2_C1 to T19_C1
To Main Menu after playback of T20_C1
To Main Menu after playback of T21
tT63tT64tT65tT66
Sub_menu3 is displayed
To Main Menu after playback of T54_C1-T60_C1
tT83_C1-T94_C1
To Main Menu after playback of T61_C1
To Main Menu after playback of T62
tT82
To Main Menu after playback of T67_C1
To Main Menu after playback of T83_C1
* When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively dis-
played.
* When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.
Note:
Txx_ Cxx
Chapter No.
Title No.
1-3-2 Menu Function
BDP-BX58/S480/S483/S580

1-10
1-3-2-3. BLX-204 Menu Function (3)
Main Menu
Sub_menu4 is displayed
To Main Menu after playback from T23_C1 to T40_C1
To Main Menu after playback of T41_C1
To Main Menu after playback of T42_C1
Sub_menu2 is displayed
To Main Menu after playback of T44_C1-T50_C1tT71_C1-T81_C1
To Main Menu after playback of T51_C1
To Main Menu after playback of T52_C1tT69
To Main Menu after playback of T68_C1
To Main Menu after playback of T70_C1
* When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively dis-
played.
* When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively
displayed.
BDP-BX58/S480/S483/S580

1-11
1-3-2-4. BLX-204 Menu Function (4)
Sub menu 1
1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% tReturn to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selec-
tively displayed on Sub menu1 screen.
3) Selection of 2. Color Bar 75% tReturnto Sub menu1 after seamless playback fromT1_C2 to T1_C13. 1. Color Bar 100% is selectively
displayed on Sub menu1 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu1, Main Menu is selected tJump to Main Menu. At the display of Main Menu, 1. Video Signal of
59.94Hz/1080i is selectively displayed.
6) Selection of LPCM Audio tPlayback from T2_C1 to T19_C1. SubPic that corresponds toAudio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
7) Selection of Dolby AC-3 Audio tPlayback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
8) Selection of Motion Picture tReturn to Sub menu1 after playback of T21_C1. 1. Color Bar 100% is selectively displayed on Sub
menu1 screen.
9) Selection of AV Sync tReturn to Sub menu1 after playback of T67_C1. 1. Color Bar 100% is selectively displayed on Sub menu1
screen.
10) At the selection of Main Menu, 1. Video Signal of 1080/59.94i of Main Menu is selectively displayed.
BDP-BX58/S480/S483/S580

1-12
1-3-2-5. BLX-204 Menu Function (5)
Sub menu 2
1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% tReturn to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is
selectively displayed on Sub menu2 screen.
3) Selection of 2. Color Bar 75% tReturn to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu2 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu2, Main Menu is selected tJump to Main Menu. At the display of Main Menu, 1. Video Signal of
23.976Hz/1080P is selectively displayed.
6) Selection of LPCMAudio tPlayback from T44_C1 to T50_C1 and from T71_C1 toT81_C1. SubPic that corresponds toAudio stream
1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
7) Selection of Dolby AC-3 Audio tPlayback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
8) Selection of Motion Picture tReturn to Sub menu2 after playback of T52_C1 and T69. 1. Color Bar 100% is selectively displayed on
Sub menu2 screen.
9) Selection of AV Sync tReturn to Sub menu2 after playback of T70_C1. 1. Color Bar 100% is selectively displayed on Sub menu2
screen.
10) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.
BDP-BX58/S480/S483/S580

1-13
1-3-2-6. BLX-204 Menu Function (6)
Sub menu 3
1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% tReturn to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is
selectively displayed on Sub menu3 screen.
3) Selection of 2. Color Bar 75% tReturn to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu3 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu3, Main Menu is selectedtJump to Main Menu.At the display of Main Menu, 1. Video Signal of 50Hz/1080i
is selectively displayed.
6) Selection of LPCMAudio tPlayback from T54_C1 to T60_C1 and from T84_C1 toT94_C1. SubPic that corresponds toAudio stream
1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
7) Selection of Dolby AC-3 Audio tPlayback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
8) Selection of Motion Picture tReturn to Sub menu3 after playback of T62_C1 and T82. 1. Color Bar 100% is selectively displayed on
Sub menu3 screen.
9) Selection of AV Sync tReturn to Sub menu3 after playback of T83_C1. 1. Color Bar 100% is selectively displayed on Sub menu3
screen.
10) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.
BDP-BX58/S480/S483/S580

1-14
1-3-2-7. BLX-204 Menu Function (7)
Sub menu 4
X
1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% tReturn to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is
selectively displayed on Sub menu4 screen.
3) Selection of 2. Color Bar 75% tReturn to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu4 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) AtthedisplayofSubmenu4,MainMenuisselectedtJumptoMainMenu.Atthedisplayof MainMenu,1.VideoSignalof 59.94Hz/720P
is selectively displayed.
6) Selection of LPCM Audio tPlayback from T44_C1 to T50_C1. SubPic that corresponds toAudio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
7) Selection of Dolby AC-3 Audio tPlayback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
8) Selection of Motion Picture tReturn to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub
menu4 screen.
9) Selection of AV Sync tReturn to Sub menu4 after playback of T68_C1. 1. Color Bar 100% is selectively displayed on Sub menu4
screen.
10) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.
BDP-BX58/S480/S483/S580

1-15
.4-1 DRIVE REPAIRING
1-4-1.
Preparation
1-4-2.
Checking Flow ~ Drive (BU) section ~
•ESD Measures
It is necessary to check the working space ESD condition
before starting the Drive Part (BU) repairs
The ESD-resistance of BD Laser is weaker than DVD/CD Laser
To prevent ESD destruction, please make sure the working
space and human ESD.
Drive flowchart
BDP-S480 can play the BD-disc
BLX-104
BDP-S480 can play the DVD/CD-disc
CheckDrive Power Supply
CN301Pin 3: 12V
IC309 Pin 1: 5V CheckPS301, PS302
ReplacePS when open
Check / replace the FFC cable, then check
BDP-S480 operatesnormally
OP FFC cable (1-838-615-11)
Check the Optical Block Unit (BU) by
servicemode. (Flowchartzz)
BU IOP is OK? Replacethe Optical Block Unit (BU)
Optical Block Unit (BU) replace
(Flowchartyy)
OK
DVD: HLX-513
CD: HLX-A1
NO
YES
NO
YES
YES
NO NO
NO
SPD FFC cable (1-838-617-11)
•How to open FFC Holder. Refer below picture.
1
2
BDP-BX58/S480/S483/S580

1-16
1-4-3. BU Check Flow [zz] ~
Before BU Replacement
1-4-4. BU (Optical Block) Repair Guide
BDP 6G (BDP-S480) series component structure is as same as conventional DVD Players.
However BD player requires precise read out functions and also secure contents Protection
system.
Since above requirement, it is necessary to set/adjust BU data to EEPROM.
The following cases need Adjustments;
(1)Replace BU (MB is original)
(2)Replace MB (BU is original)
(3)Replace both BU and MB
•JIG Requirement
Digital camera (recommend with macro mode)
Barcode decoder (BDPRdec_ver2.0) installed in JIG PC’s
USB memory
ESD work bench
•Procedure (all cases) Refer the diagram
Remarks:
The servo adjustment procedure will be carried out during OP data Writing.
There is no manual adjustment procedure. LD ON TIME history doesn’t carry over.
Do not touch any optical block parts, Turn Table and during replacing. BD Laser diode
is very sensitive!
Optical Block Unit (BU) IOP check flow (zz) ~ [Before BU Replacement]
Enter Service Mode
Press<OPEN/CLOSE>., <PLAY>,<STOP>
and plug in AC Power
Inside *Service Mode Menu
Select [8] Drive
Inside *Drive
Select [7] OP Check Menu
Inside *OP Check Menu
Select [2] dIOP then press 'ENTER'
SpecificationdIOP
BD: 6mA
DVD, CD: 9mA
IOP outof specificationneed BU
replacement
OpticalBlock Unit (BU) replace
(Flowchartyy)
AC Power OFF
NO
YES
+
-+
-
BDP-BX58/S480/S483/S580

1-17
1-4-5. BU Adjustment Flow [yy] ~
1-4-6. KEM-470AAA/C2RP Packing Spec.
Optical Block Unit (BU) OP Data Write Flow (yy) ~ [After BU/MB Replacement]
Removethe defective BU from Loading
Assy and also remove BU insulator (4pcs)
Unpacknew BU and take OP Data Barcode
photo by camera
AssembleBU with Insulators to Loading
Assy (tighten screw with 2kgf)
Decode the OP Data Barcode phot using
BDPRdec.exe and save the test data to
USB memory(File Name: BuData.txt)
Enter Service Mode and insert USB memory
to USB connector
Select [8] Drive -->
Select [1] Drive OP data Write
PressENTER
After FinishingReWriteOPdata
--> Turn AC Power OFF
And confirmdIOP by select [7] OP Check
Menu to verify IOP in specification
IOP in specification --> Turn AC Power OFF
TurnPower ON and check playback
performanceusing BD, DVD and CD BLX-104
DVD: HLX-513
CD: HLX-A1
The following cases need OP Data Write:
(1) Replace BU (MB is original)
(2) Replace MB (BU is original)
(3) Replace both BU and MB
JIG requirement
Digital camera (with macro mode)
Barcode decoder (BDPRdec exe)
installed in jig
PC's (jig purpose)
USB memory
ESD free work bench
BDP-BX58/S480/S483/S580