Sony XM-GTR2022 User manual

XM-GTR2022
2/1 channel GTR amp
202W x 2 RMS (20Hz-20kHz, <1%THD+N, at 4 Ohm, 14.4V)
1
Maximum power output of 400W per channel at 4 Ohm.
250W x 2 RMS (20Hz-20kHz, <1%THD+N, at 2 Ohm, 14.4V)
Maximum power output of 600W per channel at 4 Ohm.
500W x 1 RMS (20Hz-20kHz, <1%THD+N, at 4 Ohm mono, 14.4V)
This unit can be used as a bridging amplifier with a maximum
output of 1200W at 4 Ohms.
Direct connection (High Level Input) can be made with the speaker
output of your car audio unit if it is not equipped with RCA line output.
Hi- Level Sensing power On feature allows the unit to be activated
without need for remote connection.
Built in variable 12 dB/Oct LPF (Low Pass Filter) from 50-300Hz
enables users to concentrate the power on lower frequencies.
Variable 0-10 dB 40Hz bass boost provides additional bass
response at lower frequencies.

Sony Electronics Inc. • 16530 Via Esprillo • San Diego, CA 92127 • 1.800.222.7669 • www.sony.com
Last Updated: 01/20/2010
XM-GTR2022
2/1 channel GTR amp
Please visit the Dealer Network for current information at
www.sony.com/dn
Features
202W x 2 RMS (20Hz - 20kHz, 1%THD+N, at 4 Ohm, 14.4V)
1
Maximum power output of 400W per channel at 4 Ohm.
250W x 2 RMS (20Hz - 20kHz, 1%THD+N, at 2 Ohm, 14.4V)
500W x 1 RMS (20Hz - 20kHz, 1%THD+N, at 4 Ohm mono,
14.4V)
This unit can be used as a bridging amplifier with a
maximum output of 1200W.
High Level input with Sensing Power On Direct connection
(High Level Input) can be made with the speaker output of
your car audio unit if it is not equipped with RCA line output.
Hi - Level Sensing power On feature allows the unit to be
activated without need for remote connection.
Variable LPF filter and 40 Hz boost Built in variable 12 dB/Oct
LPF (Low Pass Filter) from 50 - 300Hz enables users to
concentrate the power on lower frequencies.
Variable 0 - 10 dB 40Hz bass boost provides additional bass
response at lower frequencies.
Specifications
Audio
FrequencyResponse: 5 - 50kHz (+0/ - 3 dB)
InputLevel: 0.3 - 6.0V (RCA input) or 1.2 - 12.0V (High Level Input)
Impedance: 2 - 8 Ohms Stereo or 4 - 8 Ohms Mono
Operation: 2/1 channel configuration
ToneControl(s): Low Pass Filter: 50 - 300Hz, - 12dB/Oct
HarmonicDistortion: 0.01% (at 1kHz)
LowBoost: 0 - 10dB (40Hz)
Signal - to - Noise Ratio (dB): 93 dBA
Power
OutputPower: Maximum Output: 400W x2 or 1200W x1 (at 4
Ohms)
CurrentDrain: At rated output:48A (at 4 Ohms)
Remote Input: 1 mA
RatedOutput: 202 Watts x 2 RMS (20Hz - 20kHz, 1% THD+N, 4
Ohms, 14.4V)
250 Watts x 2 RMS (20Hz - 20kHz, 1% THD+N, 2 Ohms, 14.4V)
500 Watts x 1RMS Mono (20Hz - 20kHz, 1.0% THD+N, at 4 Ohms,
14.4V)
PowerRequirements: 12V DC Car Battery (Negative Ground)
Internal Power Supply: OTL Output Transformerless Circuit
Pulse Power Supply
InputVoltage: 10.5 - 16V Power Supply Voltage
Inputs and Outputs
RCA Audio Input(s): Pin Jacks: 0.3 - 6V
AudioIn: RCA Pin Jacks, High Level Input Connector
AudioOut: Speaker terminals with screws
Dimensions
Weight: 11 lbs. 13 oz
1
Measurements: 10 7/8 x 2 1/4 x 15 7/8"
(276 x 57 x 403mm)
Supplied Accessories
Mounting Screws (4)
High Level Input Cord
Color: Black and Gray
UPC Code: 027242721159
1.CEA - 2006Compliant — Standardized “ Voluntary ” Testing&MeasurementMethodsforMobileAudio
Amplifiers. This standard advocates a uniform method for determining an amplifier ’ s RMS power and signal -
to - noiseratio. Using 14.4 volts, RMS watts are measuredinto a 4 - ohmimpedanceloadat1 percent Total
HarmonicDistortion (THD) plus noise, at a frequencyrange (for general purpose amplifiers) of 20Hz to
20,000Hz.
©2009Sony Electronics Inc. All rights reserved. Reproductioninwholeor in part without written permission is
prohibited.Sony,MemoryStick,nav - u, Quick - BrowZer,Walkman, Xplod, ZAPPIN, and the Sony,nav - uand
Xplodlogos are trademarks of Sony. iPhone andiPod are trademarks of Apple Inc.,registeredin the U.S. and
othercountries.Bluetoothisa trademark of Bluetooth SIG, Inc. NAVTEQ Maps & Traffic is a trademark of
NAVTEQ.Allothertrademarksaretrademarksoftheirrespectiveowners.Featuresandspecificationsare
subjectto change without notice. Non - metricweights and measures are approximate.