Sony XM-GTX1302 Marketing User manual

XM-GTX1302
2/1 channel GTX amp
130 Watts x 2 RMS (20Hz-20kHz, <1%THD+N, at 4 Ohm, 14.4V)
1
Maximum power output of 280 Watts per channel at 4 Ohm.
170 Watts x 2 RMS (20Hz-20kHz, <1%THD+N, at 2 Ohm, 14.4V)
Maximum power output of 400 Watts per channel at 2 Ohm.
340 Watts x 1 RMS (20Hz-20kHz, <1%THD+N, at 4 Ohm mono, 14.4V)
This unit can be used as a bridging amplifier with a maximum
output of 800 Watts at 4 Ohms.
Direct connection (High Level Input) can be made with the speaker
output of your car audio unit if it is not equipped with RCA line output.
Hi- Level Sensing power On feature allows the unit to be activated
without need for remote connection.
Built in 80Hz 18 dB/Oct LPF (Low Pass Filter) enables users to
concentrate the power on lower frequencies.
Built in 80Hz 12 dB/Oct HPF (Hi-Pass Filter) enables users to block low
frequencies to improve the audio systems efficiency.
Variable 0-10 dB 40Hz bass boost provides additional bass
response at lower frequencies.

Sony Electronics Inc. • 16530 Via Esprillo • San Diego, CA 92127 • 1.800.222.7669 • www.sony.com
Last Updated: 04/13/2011
XM-GTX1302
2/1 channel GTX amp
Please visit the Dealer Source for current information at
www.sony.com/dealersource
Features
130 Watts x 2 RMS at 4 Ohms
1
280 Watts x 2 max power at 4 Ohms
170 Watts x 2 RMS at 2 Ohms
400 Watts x 2 max power at 2 Ohms
340 Watts x 1 RMS at 4 Ohms
800 Watts x 1 max power at 4 Ohms This unit can be used as
a bridging amplifier with a maximum output of 800 Watts at 4
Ohms.
High Level input with Sensing Power On Direct connection
(High Level Input) can be made with the speaker output of
your car audio unit if it is not equipped with RCA line output. Hi -
Level Sensing power On feature allows the unit to be activated
without need for remote connection.
80 Hz Low - pass filter, 18 dB/oct Built in 80Hz 18 dB/Oct LPF
(Low Pass Filter) enables users to concentrate the power on
lower frequencies.
80 Hz High - pass filter, 12 dB/oct Built in 80Hz 12 dB/Oct HPF
(Hi - Pass Filter) enables users to block low frequencies to
improve the audio systems efficiency.
0 - 10 dB Variable 40Hz Low boost Variable 0 - 10 dB 40Hz bass
boost provides additional bass response at lower frequencies.
Specifications
Audio
FrequencyResponse: 5 - 50 kHz (+0/ - 3 dB)
InputLevel: 0.3 - 6.0V (RCA input) or 1.2 - 12.0V (High Level Input)
Impedance: 2 - 8 Ohms Stereo or 4 - 8 Ohms Mono
Operation: 2/1 channel configuration
ToneControl(s): Low Pass Filter: 80Hz, 18dB/Oct
High Pass Filter: 80Hz, 12dB/Oct
HarmonicDistortion: 0.05% (at 1kHz)
LowBoost: 0 - 10dB Variable (at 40Hz)
Signal - to - Noise Ratio (dB): 93 dBA
Power
OutputPower: Maximum Output: 280 Watts x2 or 800 Watts x1
(at 4 Ohms)
CurrentDrain: At rated output: 30A (at 4 Ohms)
Remote Input: 1 mA
RatedOutput: (20Hz - 20kHz, 1% THD+N, 14.4V) 130 Watts x 2
RMS (4 Ohms)
170 Watts x 2 RMS (2 Ohms)
340 Watts x 1 RMS Mono (4 Ohms)
PowerRequirements: 12V DC Car Battery (Negative Ground)
Internal Power Supply: OTL Output Transformerless Circuit
Pulse Power Supply
InputVoltage: 10.5 - 16V Power Supply Voltage
Inputs and Outputs
RCA Audio Input(s): Pin Jacks: 0.3 - 6V
AudioIn: RCA Pin Jacks, High Level Input Connector
1
AudioOut: Speaker terminals with screws
Dimensions
Weight: 6 lbs. 10 oz.
Measurements: 15 1/8" x 2 1/4" x 10" (384 x 55 x 252 mm)
Supplied Accessories
Mounting Screws (4)
High Level Input Cord (1)
Protection cap (1)
Color: Gray and Silver
UPC Code: 027242773059
1.CEA - 2006Compliant — Standardized “ Voluntary ” Testing&MeasurementMethodsforMobileAudio
Amplifiers. This standard advocates a uniform method for determining an amplifier ’ s RMS power and signal -
to - noiseratio. Using 14.4 volts, RMS watts are measuredinto a 4 - ohmimpedanceloadat1percentTotal
HarmonicDistortion (THD) plus noise, at a frequencyrange (for general purpose amplifiers) of 20Hz to
20,000Hz.
©2010SonyElectronicsInc.Allrightsreserved.Reproductionin whole or in part without writtenpermissionis
prohibited.Sony, Quick - BrowZer,Walkman, Xpl
ō d, ZAPPIN, and the Sony and Xpl ō dlogosaretrademarksof
Sony.iPodisatrademarkofAppleInc.All other trademarks are trademarks of theirrespectiveowners.
Features and specifications are subject to change without notice. Non - metricweightsandmeasuresare
approximateand may vary.