–5 –
3
. Insert a VIDEO CD.
1Slide OPEN to open the lid. 2Fit the VIDEO CD to the pivot and
close the lid.
OPEN switch
Label side up
4
. Play a VIDEO CD.
1Press uon the main unit or the wireless remote control.
2Adjust the volume on the equipment connected to this player. (You cannot adjust the
volume on this player except for the signals output from the i/REMOTE jack).
To stop playing, press x.
The player also turn off.
u
VOLUME +/–
u
Do this
Press u.
Press x/CHG (x).
Press u
Press >repeatedly until you find the scene or track.
Press .repeatedly unitl you find the scene or track.
Press the number button of the track (wireless remote
control only).
Press .or >and hold it down until mor M
appears on the TV screen.
To
Pause
Stop
Resume play after pause
Locate the next or succeeding tracks
Locate the current or preceding tracks
Locate a specific track directly
Locate a point in the track while monitoring
the picture*
* To return to normal playback, press u.
The above operations can also be done with the buttons on the supplied earphones with remote
control or wireless remote control.
About the display
•No indication appears on the display while you operate the unit with the wired remote control.
•During play, the track number and the elapsed playing time of the current track appear.
•During pause, the elapsed playing time flashes.
If the volume level does not increase (when listening with the
headphones/earphone)
Is AVLS set to “LIMIT”? Set AVLS to “NORM.”For details, see “To protect your hearing
(AVLS)”on page 24.
If a cable is connected to the AUDIO OUT jack, you cannot adjust the volume. In such a case,
disconnect the cable.
Removing the VIDEO CD
Remove theVIDEO CD as illustrated.
Dent
Playing an audio CD
You can also use rechargeable batteries, alkaline batteries and a car battery. (See “Connecting a
power source”on pages 28 - 30.)
1
. Connect your CD player.
1Connect the AC power adaptor.
2Connect the earphones with remote
control.
Connect the earphones firmly. A
loose connection may cause noise
during playback.
to DC IN
4.5V
AC power
adaptor
to an AC outlet
to i/REMOTE
2
. Insert an audio CD.
1Slide OPEN to open the lid.
OPEN switch
Label side up
2Fit the audio CD to the pivot and
close the lid.
3
. Play an audio CD.
1Press u on the main unit or press
the jog lever on the remote control
toward u.
2Adjust the volume by pressing
VOLUME + or –.
To stop playing, press x.
The player is also turned off.
u
VOLUME +/–
Jog lever
VOLUME
Earphones with
remote control
(supplied)
Note
When playing back an audio CD using the AC
power adaptor, it takes a while until the sound is
heard.
Press
u
x/CHG (x)
u
.once**
.repeatedly**
>once**
>repeatedly**
Number buttons of the track (wireless remote
control only)**
Hold down >**
Hold down .**
To
Pause
Stop
Resume play after pause
Find the beginning of the current track (AMS*)
Find the beginning of previous tracks (AMS)
Find the beginning of the next track (AMS)
Find the beginning of succeeding tracks (AMS)
Locate a specific track directly
Go forward quickly
Go backwards quickly
* Automatic Music Sensor
** These operations are possible during both play and pause.
The above operations can also be done with the buttons on the supplied earphones with remote
control or wireless remote control.
If you press REPEAT/ENTER (RPT/ENT) to display “REPEAT”, you can locate the tracks continuously in the
following order:
•When using >: next track tnext track ...... last track tfirst track tsecond track ......
•When using .: previous track tprevious track ...... first track tlast track ......
About the display
•When playing an audio CD using the AC power adaptor, indications on the remote control
display window go off until the sound is heard.
•When you press u, the total number of tracks in the audio CD and total playing time appear
for about two seconds.
•During play, the track number and the elapsed playing time of the current track appear.
•Between tracks, the time to the beginning of the next track appears with the “-”indication.
•During pause, the elapsed playing time flashes.
If the volume level does not increase
Is AVLS set to “LIMIT”? Set AVLS to “NORM.”For details, see “To protect your hearing
(AVLS)”on page 24.
If a cable is connected to the AUDIO OUT jack, you cannot adjust the volume. In such a case,
disconnect the cable.
Removing the audio CD
Remove the audio CD as illustrated.
Dent
