Sony KV-F25 User manual

Trinitron Color TV

1995 by Sony Corporation
3-810-564-11 (1)
Operating Instructions
MN11
KV-F25
KV-F29

2

3
TV
SYSTEM
B/G I D/K M
TV
SYSTEM AUTO PROGR
MANUAL
PROGR
COLOR
SYSTEM
LVIDEO
S1 VIDEO
2
(MONO)
VIDEO IN 3
–R
AUDIO
–
AUTO
PROGR
– MENU + ENTER
(CLEAR)

4

Getting Started 5
Table of contents Getting Started
6Connections
7Presetting channels
9Introducing the menu
10 Changing the menu language
Operations
11 Watching the TV
12 Adjusting the picture
14 Adjusting the sound
15 Selecting a stereo or bilingual program
16 Viewing Teletext
17 Customizing the TV (SET UP)
Additional Information
20 Troubleshooting
back Specifications
cover

Getting Started
6
Getting Started
Connections
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable.
Plug the connector into the (antenna) socket at the rear of the TV.
Rear of TV
or
On a wall
Rear of TV
Connecting optional equipment
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder,
headphones, or stereo system.
to antenna
output
Video (yellow)
Audio-L (white)
Audio-R (red) to video
and audio
outputs
to antenna
socketRear of TV
to video
and audio
inputs
to S video
output
to video and
audio outputs
Camcorder
: Signal
flow
LVIDEO
S1 VIDEO (MONO)
VIDEO IN 3
–R
AUDIO
–
Note on the S1-Video signal
When inputting the S1-Video signal through the VIDEO IN 1 or
VIDEO IN 3 jack, turn wide mode OFF if you do not want to
display the picture in wide mode (see page 17).
Note on the video input
When no signal is input, the screen becomes blue.
When connecting a monaural VCR
Connect the yellow plug to VIDEO and the black plug to
AUDIO-L (mono).
When both S1-Video and video signals are input
The S1-Video input signal is selected. To view a video signal,
disconnect the S1-Video connection.
MON/TV
OUT
VIDEO IN
12
VIDEO
L
R
(MONO)
S1 VIDEO
AUDIO
VCR

Getting Started 7
Presetting channels
You can preset TV channels easily by storing all the
receivable channels automatically. You can also preset
channels manually or disable program positions.
Presetting channels automatically
You can preset up to 100 TV channels in numerical
sequence from program position 1.
1
3Press AUTO PROGR.
1 2 3 1
To start presetting channels automatically
from the specified program position
1Press MANUAL PROGR.
2Press TV SYSTEM to select your local TV system.
3Press PROGR +/– to select the program position.
4Press AUTO PROGR.
AUTO
PROGR
1Press POWER.
When the TV is in standby mode after pressing
POWER, press POWER on the remote commander.
2Press TV SYSTEM to select your local TV
system.
POWER
B/G ID/K M
TV
SYSTEM
23
POWER
TV
SYSTEM AUTO PROGR
MANUAL
PROGR
COLOR
SYSTEM
–MENU+ ENTER
(CLEAR)

Getting Started
8
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press PROGR
+/–.
1Press PROGR +/–until the unused or
unwanted program position appears on the
screen.
2Press MANUAL PROGR.
3Press ENTER (CLEAR) on the TV.
4Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.
Presetting channels manually
To change the program position for a channel or to
receive a channel with a weak signal, preset the
channel manually.
1Press MANUAL PROGR.
2Press PROGR +/–until the required program
position appears on the screen.
3Press TV SYSTEM to select your TV system.
4Press + or –until the required channel
picture appears on the screen.
5Press MANUAL PROGR.
If the TV system is not properly selected
The color of the picture may be poor and/or the sound
may be noisy. In this case, select the appropriate TV
system.
1Press PROGR +/–to select the program position.
2Press TV SYSTEM until the picture and sound
become normal.
TV SYSTEM
Note
•The setting of the TV SYSTEM is memorized for each program
position.

9
Getting Started
Introducing the
menu
You can use the on-screen menus to set the picture
quality, sound, and other settings. You can use buttons
on both the remote commander and the TV to operate
the menus.
Main menu
／中文
(∗KV-F29MN11 only)
Getting back to the previous menu
Move the cursor (z) up to the first line of each
menu (except the main menu), and press
ENTER.
Notes
•If more than 60 seconds elapse after you press a button, the
menu screen disappears automatically.
•You can display all of the features available for the TV in
DEMO mode.
Cancelling the menu screen
Press MENU.
9

10 Getting Started
Changing the menu
language
If you prefer Chinese to English, you can change the
menu language. You can use buttons on both the
remote commander and the TV.
Getting back to the English menu
1Press MENU.
+ or –
MENU
1Press MENU.
2Press + or –to move the cursor (z) to
LANGUAGE.
3Press ENTER.
4Press + or –to select CHINESE.
／中文
5Press ENTER.
／中文
／中文
6Press MENU to return to the normal screen.
MENU
ENTER
ENTER
MENU
MENU
3Press ENTER.
／中文
ENTER
4Press ENTER.
／中文
ENTER
5Press MENU to return to the normal screen.
MENU
ENTER
2Press + or –to move the cursor (z) to the
fourth line from the top (“/LANGUAGE”).