Sony PlayStation 4 Manual

SETUP INSTRUCTIONS FOR PLAYSTATION 4
1. Ensure that Circuit Breakers 2B, 3A, and 3B have been turned on in the electrical panel.
2. Turn power on for the Television, Sound bar, and the PlayStation
3. Using the television remote, select source to HDMI 1
4. Press the PS button on the controller, and then select a user.
You can use up to 4 controllers at the same time. When you press the PS button, a
color is assigned to the user and the light bar lights up. The color that is assigned
to the user depends on the order in which the users press the PS button. The first
user is blue, the second is red, the third is green, and the fourth is pink.
5. If controllers are not automatically paired to the console follow the steps below
a. Perform device registration (pairing). Connect the PS4™ system and the
controller with a USB cable while the PS4™ system is turned on.
b. If you want to use 2 or more controllers, perform device registration for each
controller.

2
2. Charging the PS4 Controller Batteries
Docking Station
a. Place controller upside down in charging station slot.
b. Let it remain on the charger for 2.5 to 3 hours to fully charge controller
c. Red/green LED indicator light shows when controllers are charging and when
they are fully charged; has over-charge protection
USB Cable
a. When you connect the PS4™ system and the controller with a USB cable, the
controller's battery is charged. The PS4™ system must be turned on or in rest
mode. You can check the charge level of the battery on the screen that is
displayed when you press and hold the PS button for at least 1 second.
While in rest mode, the light bar slowly blinks in orange. When charging is
complete, the light bar turns off.
b. It takes approximately 2 hours to charge the controller when the battery has no
remaining charge.
c. Charge the controller in an environment where the ambient temperature is
between 10 °C and 30 °C (50 °F and 86 °F). You might not be able to efficiently
charge the controller in other environments.
d. Even when not using the controller for a prolonged period of time, completely
charge it once a year to keep it functioning.
e. Battery life varies depending on how you use the controller and the environment
in which the controller is used and stored.
f. To charge while the system is in rest mode, you must select an option other than
[Off] in (Settings) > [Power Save Settings] > [Set Functions Available in
Rest Mode] > [Supply Power to USB Ports].

3
3. Basic information about use of the controller is listed below.
Front
A ) Directional buttons
B ) SHARE button
C ) Touch pad/Touch pad button
Press the touch pad to use the touch pad button.
D ) Speaker
E ) OPTIONS button
F ) button/ button/ button/ button
G ) Right stick/R3 button
Press down on the stick to use it as the R3
button.
H ) PS button
I ) Stereo headset jack
J ) Extension port
K ) Left stick/L3 button
Press down on the stick to use it as the L3
button.
Top
A ) R1 button
B ) R2 button
C ) Light bar.
D ) L1 button
E ) L2 button
F ) USB port
Step-by-step Instructions
https://manuals.playstation.net/document/gb/ps4/basic/install.html