Sony PS4 Pro User manual

Safety Guide
安全指南
安全指南
CUH-7006B
4-597-874-32(2)

2
CUH-7006B 4-597-874-32(2) EN/CT/CS
EN
WARNING
To avoid electrical shock, do not open the
enclosure. Refer servicing to qualified personnel
only.
Caution
Use of controls or adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
The use of optical instruments with this product
will increase eye hazard.
This appliance is classified as a CLASS 1 LASER product under
IEC60825-1:2007.
Photosensitivity/Epilepsy/Seizures
A very small percentage of individuals may experience
epileptic seizures or blackouts when exposed to certain light
patterns or flashing lights. Exposure to certain patterns or
backgrounds on a television screen or when playing video
games may trigger epileptic seizures or blackouts in these
individuals. These conditions may trigger previously
undetected epileptic symptoms or seizures in persons who
have no history of prior seizures or epilepsy. If you, or
anyone in your family, has an epileptic condition or has had
seizures of any kind, consult your physician before playing.
IMMEDIATELY DISCONTINUE use and consult your physician
before resuming gameplay if you or your child experience
any of the following health problems or symptoms:
• dizziness,
• altered vision,
• eye or muscle twitches,
• loss of awareness,
• disorientation,
• seizures, or
• any involuntary movement or convulsion.
RESUME GAMEPLAY ONLY ON APPROVAL OF YOUR
PHYSICIAN.
Use and handling of video games to reduce the likelihood
of a seizure
• Use in a well-lit area and keep as far away as possible from
the television screen.
• Avoid large screen televisions. Use the smallest television
screen available.

3
EN
CUH-7006B 4-597-874-32(2) EN/CT/CS
• Avoid prolonged use of the PlayStation®4 system. Take a
15-minute break during each hour of play.
• Avoid playing when you are tired or need sleep.
3D images
Some people may experience discomfort (such as eye strain,
eye fatigue, or nausea) while watching 3D video images or
playing stereoscopic 3D games on 3D televisions. If you
experience such discomfort you should immediately
discontinue use of your television until the discomfort
subsides.
Sony Interactive Entertainment recommends that all viewers
take regular breaks while watching 3D video images, or
playing stereoscopic 3D games. The length and frequency of
necessary breaks may vary from person to person - please
take breaks that are long enough to allow any feelings of
discomfort to subside. If symptoms persist, consult your
doctor.
The vision of young children (especially those under 6 years
old) is still under development. Sony Interactive
Entertainment recommends that you consult with a doctor
(such as a pediatrician or eye doctor) before allowing a
young child to watch 3D video images or play stereoscopic
3D games. Adults should supervise young children to ensure
they follow the recommendations listed above. When using
any 3D enabled device with your PS4™ system you should
read the instruction manual for that device.
Radio waves
Radio waves may aect electronic equipment or medical
devices (for example, pacemakers), which may cause
malfunctions and possible injuries.
• If you use a pacemaker or other medical device, consult
your doctor or the manufacturer of your medical device
before using the wireless networking feature (Bluetooth®
and wireless LAN).
• Do not use the wireless networking feature in the
following locations:
– Areas where wireless network use is prohibited, such as
in hospitals. Abide by medical institution regulations
when using the system on their premises.
– Areas near fire alarms, automatic doors and other types
of automated equipment.
PS4™ system and DUALSHOCK®4 wireless controller
compliance with IMDA standards
Complies with
IMDA Standards
DB102988

4
CUH-7006B 4-597-874-32(2) EN/CT/CS
Contents
WARNING...............................................................................2
Precautions............................................................................5
Replacing the hard disk drive..............................................11
When disposing of the wireless controller......................... 15
Specifications ...................................................................... 16
HARDWARE WARRANTY ...................................................... 19
Copyright and trademarks..................................................20

5
EN
CUH-7006B 4-597-874-32(2) EN/CT/CS
Precautions
Before using this product, carefully read this manual and
retain it for future reference. Parents and guardians of
children should read this manual and make sure that the
child follows all safety precautions.
Safety
This product has been designed with the highest concern for
safety. However, any electrical device, if used improperly, has
the potential for causing fire, electrical shock or personal
injury. To help ensure accident-free operation, follow these
guidelines:
• Observe all warnings, precautions and instructions.
• Regularly inspect the AC power cord for damage.
• Stop use, unplug the AC power cord from the electrical
outlet and disconnect any other cables immediately if the
device functions in an abnormal manner, produces
unusual sounds or smells or becomes too hot to touch.
• For more information on product safety and support, visit
our website ( back cover).
Use and handling
• Do not use the system in a closed cabinet or other
locations where heat may build up. Doing so may cause
the system to overheat and may lead to fire, injury or
malfunction.
• If the system's internal temperature becomes elevated, a
message will be displayed. In this case, turn o the system
and leave it unused for a while. After the system cools
down, move it to a location with good ventilation, and
then resume use.
• Use in a well-lit area and keep as far away as possible from
the television screen.
• Avoid prolonged use of the PS4™ system and wireless
controller.
• Stop using the system immediately if you begin to feel
tired or if you experience discomfort or pain in your hands
or arms while operating the wireless controller. If the
condition persists, consult a doctor.
• If you experience any of the following health problems,
discontinue use of the system immediately. If symptoms
persist, consult with your doctor.
– Dizziness, nausea, fatigue or symptoms similar to
motion sickness
– Discomfort or pain in a part of the body, such as eyes,
ears, hands or arms
• Keep the system, accessories, and any small components
out of the reach of small children.
• Keep this product out of the reach of small children. Small
children may swallow small parts or may wrap the cables
around themselves, which may inflict injury or cause an
accident or a malfunction.

6
CUH-7006B 4-597-874-32(2) EN/CT/CS
• Make sure the AC power cord is unplugged from the
electrical outlet before you connect the HDMI cable.
• Any TV or component connected to the system must be
functioning properly and free of defects. If a TV or
component connected to the system is faulty or defective,
it may cause damage to the TV or component, or to the
system itself. As with all electrical products, connection to
faulty or defective components, or the failure to connect to
a properly wired outlet, may cause sparking and pose a fire
hazard.
• Do not touch the system or connected cables or
accessories during an electrical storm.
• Do not use the system or accessories near water.
• Do not allow liquid, small particles or other foreign objects
to get into the system or accessories.
• Do not touch the connectors of the system or accessories.
• Do not expose the system or accessories to dust, smoke or
steam. Also, do not place the system in an area subject to
excessive dust or cigarette smoke. Dust build-up or
cigarette smoke residue on the internal components (such
as the lens) may cause the system to malfunction.
• Do not expose the system or accessories to high
temperatures, high humidity or direct sunlight.
• Do not place the system or accessories on surfaces that
are unstable, tilted or subject to vibration.
• Do not set the system other than in the vertical or
horizontal position. When setting the system in the vertical
position, use the vertical stand (sold separately) for this
model of the system.
• Be careful when carrying the system. If you do not have a
good grip, the system may drop causing potential damage
or injury.
• Do not turn o the system while data is being saved on or
loaded from the hard disk drive.
• Do not remove the AC power cord from the electrical outlet
until the power indicator has turned o. If you disconnect
the AC power cord while the power indicator is lit or
blinking, data may be lost or corrupted, or the system may
be damaged.
• Do not move the system or adjust its position when the
power indicator is lit or blinking. Data may be lost or
corrupted, or the system may be damaged.
• Do not stand on or put objects on the system, and do not
stack the system with other devices.
• Do not place the system and connected accessories on the
floor or in a place where they may cause someone to trip
or stumble.
• Do not allow bodily contact with the system or air from the
system vents for an extended period of time while in use.
Extended contact under these conditions may cause
low-temperature burns.
• When connecting the system to a plasma or projection* TV,
do not leave a still image on the TV screen for an extended
period of time, as this may leave a faint image
permanently on the screen.
* Except LCD screen types
• Parents are encouraged to monitor children in online
activities to ensure safe and responsible Internet usage.
• Permanent hearing loss may occur if the headset or
headphones are used at high volume. Set the volume to a
safe level. Over time, increasingly loud audio may start to
sound normal but can actually be damaging your hearing.
If you experience ringing or any discomfort in your ears or
mued speech, stop listening and have your hearing
checked. The louder the volume, the sooner your hearing
could be aected. To protect your hearing:

7
EN
CUH-7006B 4-597-874-32(2) EN/CT/CS
– Limit the amount of time you use the headset or
headphones at high volume.
– Avoid raising the volume to block out noisy
surroundings.
– Lower the volume if you can't hear people speaking
near you.
• Do not use the headset or headphones if they cause
discomfort to your skin. If the headset or headphones
cause discomfort to your skin, discontinue use
immediately. If symptoms do not subside even after
discontinuing use, seek medical attention.
• When using the headset or headphones in particularly dry
air conditions, you may sometimes experience a small and
quick (static) shock on your ears. This is a result of static
electricity accumulated in the body, and is not a
malfunction of your headset or headphones.
About the USB device
If "An unknown USB device has been connected" is displayed
on-screen, the reason may be one of the following:
• The connected USB device is not compatible with the
system.
• The connected USB device is compatible with only some
software titles.
• Too many USB devices are connected to the USB hub.
DUALSHOCK®4 wireless controller use*
• Do not handle damaged or leaking lithium-ion batteries. If
the internal battery fluid leaks, stop using the product
immediately and contact technical support for assistance.
If the fluid gets on to your clothes, skin or into your eyes,
immediately rinse the aected area with clean water and
consult your physician. The battery fluid can cause
blindness.
• Stop using the system immediately if you begin to feel
tired or if you experience discomfort or pain in your hands
or arms while operating the wireless controller. If the
condition persists, consult a doctor.
• The vibration function of the wireless controller can
aggravate injuries. Do not use the vibration function if you
have any ailment or injury to the bones, joints or muscles
of your hands or arms. If you have an ailment or an injury,
do not use the wireless controller to play software titles
that contain the vibration function unless you first disable
this function.
• Avoid prolonged use of the wireless controller. Take a
break at about 30-minute intervals.
• Note that some software titles enable the vibration
function by default. To disable the vibration function,
Select (Settings) > [Devices] > [Controllers] from the
function screen, and then remove the checkmark from
[Enable Vibration].
• When using the motion sensor function of the wireless
controller, be cautious of the following points. If the
controller hits a person or object, this may cause
accidental injury or damage.
– Before using, check that there is plenty of space around
you.

8
CUH-7006B 4-597-874-32(2) EN/CT/CS
– When using the controller, grip it firmly to make sure it
cannot slip out of your hand.
– If using a controller that is connected to the PS4™
system with a USB cable, make sure there is enough
space for the cable so that the cable will not hit a person
or object. Also, take care to avoid pulling the cable out
of the PS4™ system while using the controller.
– Some PlayStation®, PlayStation®2 and PlayStation®3
system peripherals such as the analog controller
(DUALSHOCK®), the analog controller (DUALSHOCK®2)
and the DUALSHOCK®3 wireless controller are not
compatible with the PS4™ system.
• Do not stare at the light bar on the controller when it is
blinking. If you experience discomfort or pain anywhere in
or on your body from light stimulation, discontinue use
immediately.
• Charge in an environment where the temperature range is
between 10 °C and 30 °C. Charging may not be as eective
when performed in other environments.
• The battery has a limited lifespan. Battery duration will
gradually decrease with repeated usage and age. Battery
life also varies depending on the storage method, usage
state, environment and other factors.
• When the wireless controller is not used for an extended
period of time, it is recommended that you fully charge it
at least once a year in order to maintain battery
functionality.
* These notes may also apply to other controllers.
Vents
Do not block any vents. To maintain good ventilation, follow
the guidelines below:
• Place the system at least 10 cm away from a wall surface.
• Do not place on a carpet or rug with long fibers.
• Do not place in a narrow or cramped space.
• Do not cover with cloth.
• Do not allow dust to build up on the vents.
AC power cord use
• Do not plug the AC power cord for the system into an
electrical outlet until you have made all other connections.
Make sure the TV or other component is unplugged from
the electrical outlet prior to connecting it to the system.
• To help ensure safe operation, regularly inspect the AC
power cord. If damaged, stop use immediately and contact
Customer Service Hotline ( back cover).
• Do not use a power cord other than the supplied AC power
cord. Do not modify the cord.
• Do not touch the plug of the AC power cord with wet
hands.
• Protect the AC power cord from being walked on or
pinched particularly at plugs, expansion receptacles and
the point where the cord exits from the system.
• Do not place heavy items on the cord.

9
EN
CUH-7006B 4-597-874-32(2) EN/CT/CS
• Do not allow dust or foreign matter to build up around the
AC IN connector. Before connecting or plugging in the AC
power cord, check that there is no dust or foreign matter in
or on the power plug or connecting end of the cord, the
electricity supply or the AC IN connector on the system
rear. If the plug or connector becomes dirty, wipe o with a
dry cloth before connecting.
• Do not place the AC power cord near heating equipment
and do not expose the cord to heat.
• Unplug the AC power cord from the electrical outlet before
cleaning or moving the system, or when you do not intend
to use the system for an extended period of time. When
disconnecting, grasp the AC power cord by the plug and
pull straight out of the electrical outlet. Never pull by the
cord and do not pull out at an angle.
• Do not connect the AC power cord to a voltage transformer
or inverter. Connecting the AC power cord to a voltage
transformer for overseas travel or an inverter for use in an
automobile may cause heat to build up in the system and
may cause burns or a malfunction.
Never disassemble or modify the system or accessories
Use the PS4™ system and accessories according to the
instructions in the product documentation. No authorization
for the analysis or modification of the system or accessories,
or the analysis and use of its circuit configurations, is
provided. Unauthorized modification of the system or
accessories will void your warranty. There are no user
serviceable components inside the PS4™ system (the
supplied hard disk may be removed but not disassembled or
modified).
Additionally, there is a risk of exposure to laser radiation as
well as to electrical shock.
Network
• A broadband connection is required to access the Internet.
Note that dial-up connectivity is not supported.
• You are responsible for Internet service fees. For details,
refer to the information provided in your service contract
or contact your Internet service provider.
• Do not use a cord for a standard residential telephone line
or cables of types other than those mentioned here. Using
the wrong type of cord or cable can cause more electrical
current than necessary to flow through the LAN port,
which may lead to heat build-up, fire or malfunction.
Wireless networking feature
• The frequencies used by the wireless networking feature
of this product are the 2.4 GHz/5 GHz ranges. The 2.4 GHz
range of radio waves is shared by various devices. This
product has been designed to minimize the eect of other
devices using the same range. However, in some cases
interference from other devices may reduce the
connection speed, shorten the signal range, or cause the
connection to be terminated unexpectedly.
• When using the PS4™ system's scan function to select a
wireless LAN access point, access points that are not
intended for public use may be displayed. Only connect to
an access point that you are authorized to use.

10
CUH-7006B 4-597-874-32(2) EN/CT/CS
Moisture condensation
If the system or disc is brought directly from a cold location
to a warm one, moisture may condense either on the lens
inside the system or on the disc. Should this occur, the
system may not operate properly. In this case, remove the
disc and turn o and unplug the system. Do not put the disc
back in until the moisture evaporates from the system (this
may take several hours). If the system still does not operate
properly, contact Customer Service Hotline ( back cover).
Cleaning
For safety reasons, before cleaning the system or connected
accessories, disconnect the AC power cord from the electrical
outlet.
Exterior surfaces (plastic cover of system and wireless
controller)
Follow the instructions below to help prevent the product
exterior from deteriorating or becoming discolored.
• Wipe with a soft, dry cloth.
• Do not apply insecticides or other volatile substances.
• Do not place any rubber or vinyl materials on the product
exterior for an extended period of time.
• Do not use solvents or other chemicals. Do not wipe with a
chemically-treated cleaning cloth.
Vents
When dust accumulates in the system vents, remove the
dust with a low-powered vacuum cleaner.
Connectors
Do not use when the connectors of the system or the AC
power cord are not clean. If used when dirty, the flow of
electrical current may be obstructed. Remove the dirt with a
dry cloth.
Headset or headphones
If the connector on the headset or headphones becomes
dirty, you may experience noise or interruptions in sound.
Wipe the connectors with a dry, soft cloth to keep in clean
condition.
Discs
Note on compatibility
Some media may have region or territorial restrictions and
may not work with your system. See media packaging for
details.
Handling
Fingerprints, dust, dirt or scratches on the disc can distort
the picture or reduce sound quality. Please note the
following.
• Do not touch the disc surface when handling a disc.
• Do not stick paper or tape onto discs and do not write on
discs.
Storage
• Do not expose discs to high temperatures, high humidity
or direct sunlight.

11
EN
CUH-7006B 4-597-874-32(2) EN/CT/CS
• When discs will not be used for an extended period of
time, store them in their cases. Stacking uncased discs or
storing them at an angle can cause them to warp.
Cleaning method
• Clean discs with a soft cloth, lightly
wiping from the center outwards.
• Do not use solvents, record cleaners,
anti-static spray or other chemicals as
these can damage the discs.
Replacing the hard disk drive
Replace the hard disk drive by performing the following
steps.
1 Back up your data.
2 Replace the hard disk drive.
3 Reinstall the system software.
4 Restore data that has been backed up.
Replacement hard disk drives
You can use the following type of hard disk drive with the
PS4™ system.
Size 2.5 inch (internal type) *1
Interface format Serial ATA *2
*1 Proper operation is not guaranteed for all models.
*2 Parallel ATA is not supported.
Caution
• For safety reasons, be sure to turn o and unplug the
system before attempting to remove the hard disk
drive.
• Remove the hard disk drive in a location out of the
reach of small children, to help prevent them from
accidentally swallowing screws and other small parts.
• The inside of the system is hot directly after use. Allow
time for the system to cool down before starting to
remove the hard disk drive.

12
CUH-7006B 4-597-874-32(2) EN/CT/CS
• Be careful not to pinch your fingers between the parts
or injure your hands or fingers on the corners of the
parts.
• Be sure to reattach the HDD bay cover before turning
the PS4™ system on. If the cover is not in place, heat
may build up inside the system.
Notice
• The hard disk drive is a sensitive piece of equipment
and should be handled with care at all times. To help
prevent loss or corruption of software or data, or
damage to the hard disk drive, carefully follow the
precautions listed below:
– Do not throw or drop the system or hard disk drive,
or otherwise expose either device to strong
vibrations or strong physical impact.
– Do not allow liquid or small particles to get into the
system or hard disk drive.
– Do not touch the connectors or insert foreign objects
into the connectors.
– Do not place the system or hard disk drive close to
magnetic fields such as those produced by magnets
or loudspeakers. Also, do not place devices that may
be sensitive to magnetic forces (such as a wrist
watch or a credit card) near the hard disk drive.
– Do not put heavy objects on the hard disk drive.
– Store in a cool, dry location.
• To attach or remove screws, use an appropriate
crosshead screwdriver. If the size does not match, the
groove on the screw's head may be damaged.
• You should where possible make periodic back-ups of
data stored on the hard disk drive as a precaution
against possible loss or corruption. If for any reason
software or data loss or corruption occurs or the hard
disk drive must be formatted during authorized service,
it may not be possible to restore or repair the software
or data. Note that Sony Interactive Entertainment Inc.
and its subsidiaries and aliates will not be liable for
any loss or corruption of data, files or software.
• Do not turn o the PS4™ system or remove the storage
media during the installation of the system software.
Cancelling installation may result in damage to the
system.
• During the installation of the system software, the
power button on the system and the PS button on the
controller are not active.
Backing up data
You can copy data that is stored on the PS4™ system to a
USB storage device. For details on how to back up data and
the types of data that you can back up, refer to the User's
Guide ( back cover).

13
EN
CUH-7006B 4-597-874-32(2) EN/CT/CS
Replacing the hard disk drive
1 On the function screen, select (Power) > [Power
Options] > [Turn O PS4] to turn o the PS4™ system.
The power indicator turns o.
2 Unplug the AC power cord, and then disconnect the
other cables from the system.
For safety reasons, remove the plug for AC power cord
from the electrical outlet, and then disconnect the other
cables.
3 Turn the PS4™ system upside down, and then on the
system rear, hook your finger on the HDD bay cover
and pull in the direction of the arrow to remove the
cover.
4 Remove the hard disk drive.
1 Remove the screw.
2 Pull on the hard disk drive with the mounting bracket
to remove it.
5 Remove the screws (4 places) from the mounting
bracket.
Do not remove the rubber inserts from the screw holes.
6 Remove the mounting bracket from the hard disk
drive.

14
CUH-7006B 4-597-874-32(2) EN/CT/CS
7 Insert the replacement hard disk drive into the
mounting bracket, and then secure it using the screws
(4 places).
Do not overtighten the screws.
8 Insert the hard disk drive into the PS4™ system, and
then secure it using the screw.
Push on the hard disk portion to fully insert it into the
PS4™ system.
9 Reattach the HDD bay cover.
Hint
If you lose the HDD bay cover, screws, mounting bracket, or any
other parts, contact Customer Service Hotline ( back cover).
Installing the system software
After the hard disk drive has been replaced, the system
software must be reinstalled. Using a computer, save a
system software update file for reinstallation to a USB
storage device.
For details on how to perform the reinstallation, refer to the
update site ( back cover).
Hints
• You must reinstall system software that is either the same
version or a later version of the system software that was in use
before replacing the hard disk drive. If the appropriate update
data for your system is not available on the website, contact
Customer Service Hotline ( back cover).
• If you cannot connect to the Internet from a computer, contact
Customer Service Hotline ( back cover).
Copying data to the PS4™ system
You can copy backed up data from a USB storage device to
the PS4™ system. For details on how to back up data and
the types of data that you can back up, refer to the User's
Guide ( back cover).

15
EN
CUH-7006B 4-597-874-32(2) EN/CT/CS
When disposing of the wireless
controller
The lithium-ion battery of the wireless controller is
recyclable. When disposing of the wireless controller, remove
the battery and follow local regulations regarding disposing
of batteries.
Caution
• Remove the battery in a location out of the reach of
small children to help prevent accidental swallowing of
small parts such as the screws.
• Be careful not to hurt your nails or fingers when
removing the controller casing.
• For safety reasons, attach tape or a seal on the metal
part of the battery before disposing.
Notice
Other than when disposing of the wireless controller,
never remove the screws and never remove the battery
from the wireless controller.
1 Disconnect the USB cable from the wireless controller.
2 Using a crosshead screwdriver, remove the screws
(4 places).
3 With the front of the controller pointing up, press in
the direction of the arrows to open the cover.
4 With the rear of the controller pointing up, remove the
cover.

16
CUH-7006B 4-597-874-32(2) EN/CT/CS
5 After disconnecting the connector, remove the
battery.
Connector
Battery
Specifications
Design and specifications are subject to change without
notice.
Depending on the software version in use, the system may
operate dierently than described in this manual.
PlayStation®4 system
Main Processor
Single-chip custom processor
CPU : x86-64 AMD “Jaguar”,
8 cores
GPU : 4.20 TFLOPS, AMD
Radeon™ based graphics
engine
Memory GDDR5 8 GB
Hard disk drive Internal, 1 TB*1 *2
Optical drive
(read-only)
BD 6× CAV
DVD 8× CAV
Laser
Type: Semiconductor,
continuous
BD Wavelength: 395-415 nm
Power: Max. 1 mW
DVD Wavelength: 640-675 nm
Power: Max. 1 mW
CD Wavelength: 765-805 nm
Power: Max. 1 mW
Input/output*3
SuperSpeed USB (USB 3.1 Gen1)
port × 3
AUX port

17
EN
CUH-7006B 4-597-874-32(2) EN/CT/CS
Networking
Ethernet (10BASE-T, 100BASE-TX,
1000BASE-T)
IEEE 802.11 a/b/g/n/ac
Bluetooth®4.0 (LE)
AV output HDMI™ OUT port*4
DIGITAL OUT (OPTICAL) port
Controller DUALSHOCK®4 wireless
controller
Power AC 220-240 V, 50 / 60 Hz*5
Maximum rated power 310 W
External dimensions
(excluding projecting parts)
Approx. 295 × 55 × 327 mm
(width × height × depth)
Mass Approx. 3.3 kg
Operating temperature 5 °C to 35 °C
Main supplied items
HDMI cable
USB cable
Mono headset (with muting
feature)
AC power cord
*1 Hard disk capacity calculated using base 10 mathematics
(1 TB = 1,000,000,000,000 bytes).
*2 A portion of the hard disk capacity is reserved for use in
connection with system administration, maintenance, and
additional options. This may occur upon installation of system
software or other software. As a result, the availability of hard
disk capacity may vary depending on the system, system
software version, or available options, and is not otherwise
available for your use.
*3 Functionality of all connected devices is not guaranteed.
*4 Use the supplied HDMI cable.
*5 Varies depending on the country or region.
DUALSHOCK®4 wireless controller
Input power rating DC 5 V, 800 mA
Battery type Built-in rechargeable lithium-ion
battery
Voltage DC 3.65 V
Battery capacity 1,000 mAh
Operating temperature 5 °C to 35 °C
Mass Approx. 210 g
Playable discs
Blu-ray Disc™ (BD)*1
PlayStation®4 format BD-ROM*2
BD-ROM
BD-R
BD-RE*3

18
CUH-7006B 4-597-874-32(2) EN/CT/CS
DVD*1
DVD-ROM
DVD+R/RW
DVD-R/RW
AVCHD
*1 The first time you play a disc, you must enable the disc
playback feature over the Internet.
*2 PlayStation®format software, PlayStation®2 format software,
and PlayStation®3 format software cannot be played from a
disc.
*3 Playback of BD-RE ver. 1.0 discs is not supported.
Region codes
Depending on the disc, a region code that is based on the
geographic region where the disc is distributed may be
assigned. The PS4™ system can play discs marked with the
following region codes.
Disc Region code
Blu-ray Disc (BD)
DVD
PlayStation®4 format BD-ROM
Notices
• DVD discs that have not been finalized cannot be played.
• Do not use the following discs. If you do, the system may
be damaged.
– 8 cm discs
– Non-circular discs, such as discs in the shape of a card,
star, or heart
– Discs that are cracked or deformed, or discs that have
been repaired.
• A DualDisc features one side that conforms to the DVD
standard, and another side with audio only. The audio-only
side cannot be played on the PS4™ system.
• When playing discs with content that was copied
fraudulently, abnormal sounds may be produced or the
content may not play correctly.
• For continuous playback of copyright-protected BDs, the
encryption key for AACS (Advanced Access Content
System) may need to be renewed. The encryption key is
automatically renewed if the PS4™ system is connected to
the Internet.
• Some discs may not be playable due to scratches, dust, the
quality of recording, or the characteristics of the recording
device.
• In rare instances, BD and DVD may not operate properly
when played on the PS4™ system. This is primarily due to
variations in the manufacturing process or encoding of the
software.

19
EN
CUH-7006B 4-597-874-32(2) EN/CT/CS
System software
By updating the system software of the PS4™ system, you
can enjoy additional features, improved usability, and
enhanced security. Always update to the latest version.
• If you cannot update over the Internet, you can use a
game disc or USB storage device instead. For details, visit
the update site ( back cover).
• The system software included within this product is
subject to a limited license from Sony Interactive
Entertainment Inc.
Refer to doc.dl.playstation.net/doc/ps4-eula/ for further
details.
HARDWARE WARRANTY
For warranty terms and conditions of respective regions,
please refer to the "Support" page of the ocial website
asia.playstation.com, or call our Customer Service Hotline
(back cover).

20
CUH-7006B 4-597-874-32(2) EN/CT/CS
Copyright and trademarks
" ", "PlayStation", " " and "DUALSHOCK" are
registered trademarks or trademarks of Sony Interactive
Entertainment Inc.
"SONY" and " " are registered trademarks or trademarks
of Sony Corporation.
AMD and Radeon are trademarks of Advanced Micro Devices,
Inc.
The Bluetooth®word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sony
Interactive Entertainment Inc. is under license. Other
trademarks and trade names are those of their respective
owners.
"Blu-ray Disc™" and "Blu-ray™" are trademarks of the Blu-ray
Disc Association.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and
other countries.
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited.
DTS, DTS-HD, the Symbol, & DTS and the Symbol together
are registered trademarks, and DTS-HD Master Audio | 7.1 is
a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
Java is a registered trademark of Oracle and/or its aliates.
USB-IF SuperSpeed USB Trident logo is a registered
trademark of USB Implementers Forum, Inc.
All other trademarks are the property of their respective
owners.