Sony Wega KP-FR43 User manual

Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
© 2005 Sony Corporation
KP-FR43
KP-FR53
2-656-413-11 (1)
M94
M90
Projection TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain it
for future reference.
01GB01COV-STTInd.p65 16/9/05, 10:46 AM1
Black

2
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
01GB02WAR-STTInd.p65 16/9/05, 10:47 AM2
Black

3
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
WARNING
To prevent fire or shock hazard, do not expose the projection TV to rain or moisture.
Dangerously high voltages are present inside the projection TV. Do not open the cabinet. Refer
servicing to qualified personnel only.
For general safety:
• Do not expose the projection TV to rain or moisture.
• Do not open the rear cover.
For safe installation:
• Do not block the ventilation openings.
• Do not install the projection TV in hot, humid or excessively dusty places.
• Do not install the projection TV where it may be exposed to mechanical vibrations.
• Avoid operating the projection TV at temperatures below 5°C (41°F).
• If the projection TV is transported directly from a cold to a warm location, or if the room
temperature has changed suddenly, the picture may be blurred or show poor color. This is
because moisture has condensed on the mirror or lenses inside. If this happens, let the
moisture evaporate before using the projection TV.
• To obtain the best picture, do not expose the screen to direct illumination or direct sunlight. It
is recommended to use spot lighting directed down from the ceiling or to cover the windows
that face the screen with opaque drapery. It is desirable to install the projection TV in a room
where the floor and walls are not of reflecting material. If necessary, cover them with dark
carpeting or wall paper.
• Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
For safe operations:
• Do not operate the projection TV on anything but 110-240 V AC, 50/60 Hz.
• Do not operate the projection TV if any liquid or solid object falls in it—have it checked
immediately.
• Do not keep the projection TV plugged in if you are not going to use it for several days. Even
if your projection TV is turned off, it is still connected to the AC power source (mains) as long
as the power cord is plugged in.
• Do not pull the power cord to disconnect the projection TV. Pull it out by the plug.
• Do not plug in too many appliances to the same power socket. Do not damage the power
cord.
• Do not place any objects on the projection TV. The apparatus shall not be exposed to dripping
or splashing and that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
• Install the projection TV on a stable projection TV stand and floor which can support the
projection TV set weight. Ensure that the projection TV stand surface is flat and its area is
larger than the bottom area of the projection TV.
• Do not carry the projection TV holding the screen edges.
Caution
• When using TV games, computers, and similar products with your projection TV, keep the
brightness and contrast functions at low settings. If a fixed (non-moving) pattern is left on the
screen for long periods of time at a high brightness or contrast setting, the image can be
permanently imprinted onto the screen. These types of imprints are not covered by your
warranty.
Cleaning the Screen
• To clean the screen with a cloth, please use a cleaning cloth lightly moistened with water. Do
not use any type of abrasive pad, alkaline cleaner, scouring powder or solvent, such as alcohol
or benzine. As a safety precaution, unplug the projection TV before cleaning it.
• Do not rub, touch, or tap the surface of the screen with sharp or abrasive items, like a ball
point pen or a screw driver. Otherwise, this type of contact may result in a scratched screen.
GB
01GB02WAR-STTInd.p65 16/9/05, 10:47 AM3
Black

4Using Your New Projection TV
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
xInstall the projection TV
For the best picture quality, install the projection TV within the areas below.
Optimum viewing area (Horizontal)
KP-FR43 KP-FR53
Optimum viewing area (Vertical)
KP-FR43 KP-FR53
WEGAGATE
PROG
min. 1.7 m
min. 1.7 m
(5.6 ft.)
60°
min. 1.9 m
(6 ft.)
60°
60°
60°
WEGAGATE
PROG
min. 2.4 m
(8 ft.)
WEGAGATE
PROG
min. 1.9 m
(6 ft.)
20°
20°
WEGAGATE
PROG
min. 2.4 m
(8 ft.)
20°
20°
Using Your New Projection TV
01GB03TOC-STTInd.p65 16/9/05, 10:47 AM4
Black

5
Using Your New projection TV
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
Menu Adjustment
Introducing the WEGA GATE
navigator ............................................. 18
“Settings” Adjustment ...................... 19
Changing the “Picture” setting ........ 21
Changing the “Sound” setting ......... 22
Changing the “Wide Screen”
setting .................................................. 23
Changing the “Multi Picture”
setting (KP-FR53M94 only) .............. 24
Changing the “Channel Setup”
setting .................................................. 25
Changing the “Setup” setting .......... 27
Additional Information
Connecting optional components ... 29
Troubleshooting ................................. 32
Specifications ...................... Back cover
Table of Contents
Using Your New Projection
TV
Installation
Getting Started ..................................... 6
Setting up your projection TV
(“Initial Setup”) .................................... 7
Overview of Controls
Projection TV front, inside the drop-
down and rear panels.......................... 9
Using the remote control and
basic functions .................................... 10
Advanced Operations
Selecting the picture and
sound modes ...................................... 12
Enjoying the WEGA Theatre Mode
with center speaker ........................... 13
Viewing two programs at the same
time (KP-FR53M94 only) .................. 14
Displaying multiple programs
(KP-FR53M94 only) ........................... 15
Enjoying stereo or bilingual
programs ............................................. 16
Operating optional components ...... 17
GB
01GB03TOC-STTInd.p65 16/9/05, 10:47 AM5
Black

6Installation
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
1
Step 1
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Step 2
Step 3
Step 4
Set up the projection TV by following the instructions
of the “Initial Setup” menu (see page 7).
Plug in the power cord, then press !on the
projection TV to turn it on.
Note
• The 1(standby) indicator flashes green for a few seconds
when turning on the projection TV. This does not indicate a
malfunction.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the projection TV.
Tip
• You can also connect your projection TV to other optional
components (see page 29).
Installation
x Getting Started
b
b
Confirm:
Select:
Initial Setup
Language: English
End: WEGA GATE
01GB04INS-STTInd.p65 16/9/05, 10:48 AM6
Black

7
Installation
Installation
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
x Setting up your projection TV
(“Initial Setup”)
When you turn on your projection TV for the first time, the “Initial Setup” menu will
appear. You may change the menu language, preset the TV channels automatically,
sort or edit the channels and adjust the convergence using the buttons on the remote
control or projection TV front panel.
1Press Vor vto select the desired menu
language, then press .
The selected menu language appears.
2Press Vor vto select “Yes”, then press
to preset the channels automatically.
The screen will indicate automatic
presetting is in progress.
After all available channels have been tuned
and stored, the “Program Sorting/Edit”
menu appears automatically on the screen.
To skip automatic channel presetting, select
“No”, then press .
If the message “No channel found. Please
connect cable/antenna” appears, check your
projection TV connections, then press .
3The “Program Sorting/Edit” menu enables
you to sort and edit the channels.
a) If you wish to keep the channels in the
current condition, press WEGA GATE
to exit.
b) Press V or vto select the program
number with the channel you wish to
change. The selected channel will
appear on the screen.
c) If you wish to store the channels in a
different order:
1) Press b to enter sorting mode.
2) Press V or vto select the new
program number position for your
selected channel, then press B.continue
Initial Setup
Language: English
Confirm:
Select: End:
WEGA GATE
Initial Setup
First please connect
cable/antenna
Start Auto Program now?
Yes
No
Confirm:
Select: End:
WEGA GATE
Auto Program
Program:
TV System: Auto
01
VHF Low
End: WEGA GATE
Sorting: Edit:
Program Sorting/Edit
01
02
03
04
Off
Off
Off
Off
05 Off
06 Off
Skip
PROG Label
Confirm:
Select: Exit:
WEGA GATE
Program Sorting/Edit
01
02
03
04
Off
Off
Off
05 Off
06 Off
Sorting mode
Skip
PROG Label
Off01
Confirm:
Select: Exit:
WEGA GATE
01GB04INS-STTInd.p65 16/9/05, 10:48 AM7
Black

8Installation
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
continued
d) If you wish to edit the channels, press
to change to edit mode.
Press b until the mode that you wish to
edit is highlighted: Label, Skip, (block
symbol). Then press .
1) To label, press V or vto select the
alphanumeric characters for the label.
Then press .
2) To skip the program number, press
V or vto select “On”. Then press .
You can skip this program number
when using PROG +/–.
3) To block unwanted program number,
press V or vto select . Then press .
e) Repeat step b) to d) if you wish to change
other channels.
Press WEGA GATE to go to the next menu.
4Make sure that “Yes” is selected, then
press to start digital quick focus.
The convergence adjustment screen appears,
and the convergence is automatically
adjusted.
After the adjustment, the last “Initial Setup”
menu appears automatically on the screen.
5To prevent this “Initial Setup” menu from
appearing again when you turn on the
projection TV by pressing !, press V or v
to select “No”, then press .
To allow this menu to appear again, select
“Yes”, then press .
Tip
• You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.
Notes
• Convergence can also be adjusted manually using the menu (see page 27).
• You can also perform the Digital Quick Focus feature using on the front panel.
• Sound will be muted while the Digital Quick Focus feature is running.
Program Sorting/Edit
01
02
03
04
Off
Off
Off
05 Off
06 Off
Edit mode
Skip
PROG Label
Off
Confirm:
Select: Exit:
WEGA GATE
Program Sorting/Edit
01
02
03
04
Off
Off
Off
05 Off
06 Off
Edit mode
Skip
PROG Label
Off
Confirm:
Select: Exit:
WEGA GATE
Program Sorting/Edit
01
02
03
04
Off
Off
Off
05 Off
06 Off
Edit mode
Skip
PROG Label
Off
Confirm:
Select: Exit:
WEGA GATE
Confirm:
Select: Exit:
WEGA GATE
Initial Setup
Start digital quick focus now?
Yes
No
Confirm:
Select:
Initial Setup
Display this menu next time?
Yes
No
01GB04INS-STTInd.p65 16/9/05, 10:48 AM8
Black

9
Overview of Controls
Overview of Controls
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
WEGAGATE
PROG
4
L(MONO) R
WEGA GATE
PROG
Y
P B /
C B
P R /
C R
P B /
C B
P R /
C R
Y
R
L
R
L
R
L
(MONO)
1
1 2
2 3
120W MAX 8
C
qs qd qgqf
qh
qj
78 65432
9
0
qa 1
Overview of Controls
Projection TV front panel
Projection TV rear panel
xProjection TV front, inside the drop-
down and rear panels
Button/Terminal Function Page
1Remote control sensor. –
2!Turn off or turn on the projection TV. 6
31Standby indicator. 6
3Wake Up indicator. 10
4PROG +/– Select program number. –
52+/– Adjust volume. –
6tSelect TV or video input. 29
WEGA GATE menu operations
4,5V,v,B,bSelect and adjust items. 18
7Confirm selected items. 18
8WEGA GATE Display or cancel WEGA GATE menu. 18
9Adjust convergence automatically. 27
0t4 Video input terminal 4. 29
qa iHeadphone jack. –
qs t1, t2, t3 Video input terminal 1, 2, 3. 29
qd TMonitor output terminal. 29
qf 1 Component video input terminal 1. 30
qg 2 Component video input terminal 2. 30
qh Center speaker input terminal. 31
qj 8Antenna input terminal. 29
Inside the drop-down
panel
01GB04INS-STTInd.p65 16/9/05, 10:48 AM9
Black

10 Overview of Controls
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
xUsing the remote control and basic
functions
Button Description Page
1 ?/1Turn off temporarily or –
turn on the projection TV.
2 a Display the TV program. –
3 t Select TV or video input. 29
Stereo/bilingual operations
4A/B Select stereo/bilingual mode. 16
5PROG INDEX Display all preset TV programs. 15
(KP-FR53M94 only)
WEGA GATE menu operations
6V, v, B, b Select and adjust items. 18
7Confirm selected items. 18
8WEGA GATE Display or cancel the WEGA 18
GATE.
qj RETURN Return to the previous level. 18
9 Change the picture size: –
“4:3”, “16:9”(16:9 wide-mode).
0Jump to last program number
that has been watched for at –
least five seconds.
qa PROG +/– Select program number. –
Timer operations
qs Set projection TV to turn off
automatically according to the –
desired period of time (max.
of one hour and 30 min.).
qd Set projection TV to turn on
automatically according to the
desired period of time (max.
of 12 hours). –
The indicator on projection
TV lights up amber once you
set the wake up timer.
If no buttons or controls are
pressed for more than two
hour after the projection TV is
turned on using the wake up
timer, the projection TV
automatically goes into
standby mode.
qf Mute the sound. –
qg Display on-screen information. –
qh WEGA THEATRE Select WEGA Theatre Mode. 13
(Sleep
Timer)
(Wake Up
Timer)
123
46
789
0
5
WEGA
THEATRE
VIDEO
RETURN
A/B
PROG INDEX
GATE
OPTION
TV
PROG
WEGA
1
3
2
9
7
8
6
4
5
qf
qg
qh
w;
ws
wa
ql
qd
qs
qa
0
qj
qk
01GB04INS-STTInd.p65 16/9/05, 10:48 AM10
Black

11
Overview of Controls
Overview of Controls
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
Button Description Page
qk Select sound mode options. 12
ql Select picture mode options. 12
w; Select surround mode options. 22
wa 0 – 9 Input numbers. For program numbers 10 and above, –
enter the second digit within two seconds.
ws 2+/– Adjust volume. –
TWIN picture operations (KP-FR53M94 only)
, , V, v, B, bAll buttons are used for Twin picture operations. 14
Teletext operations (green label)
, , , , Not function for your TV. –
, , ,,
(red, green,
yellow, blue)
Optional components operations
VIDEO ?/1,OPTION,For details, see “Operating optional components”. 17
N, X, x,.,>,
,2 +/–
TruSurround, SRS and symbol are trademarks of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
01GB04INS-STTInd.p65 16/9/05, 10:48 AM11
Black

12 Advanced Operations
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
Advanced Operations
Selecting the sound mode
Press to select the desired sound mode.
Select To listen to
“Dynamic” dynamic and clear sound that emphasizes both the low
and high tones.
“Standard” sound that emphasizes voice and high tones.
“Custom” the last adjusted sound setting from the
“Sound Adjustment” option in the menu (see page 22).
xSelecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your
preference in the “Custom” option.
Selecting the picture mode
Press to select the desired picture mode.
Select To view
“Vivid” contrast and sharp pictures.
“Standard” normal pictures.
“Custom” the last adjusted picture setting
from the “Picture Adjustment”
option in the menu (see page 21).
123
46
789
0
5
WEGA
THEATRE
VIDEO
RETURN
A/B
PROG INDEX
GATE
WEGA
Dynamic
Standard
Custom
01GB05AVD-STTInd.p65 16/9/05, 10:48 AM12
Black

13
Advanced Operations
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
x Enjoying the WEGA Theatre Mode
with center speaker
The WEGA Theatre Mode enables you to enjoy the best picture, sound and
surround effect of a cinema from a DVD source. You can use your projection TV
speaker as the center speaker of your audio system for optimum vocal
enhancement and control its sound volume from the remote of the projection TV.
Setting up WEGA Theatre Mode
1. Connect the center speaker terminals of the
amplifier to the center speaker input terminal on
the projection TV (see page 31).
2. Select the proper video input and center speaker
mode from “WEGA Theatre Setup” menu and turn on
(main power) the connected equipment (see page 27).
3. See the table below. If the connected equipment is a
Sony audio/video equipment, you can set up the remote
to work with the connected equipment (see page 17).
To Press
switch to WEGA WEGA THEATRE.
Theatre Mode Be sure to aim the remote control
at the projection TV set and
connected equipment for about
one second after the button is
pressed. The connected equipment
turns on automatically from
standby mode and will start
playing (only for Sony audio/
video equipment).
The “Picture Mode” and “Sound
Mode” will switch automatically
to “Custom” and you can adjust
the setting to your personal
preference (see pages 22 and 23).
adjust center 2 +/–.
speaker volume
Notes
• Be sure to place your projection TV and connected Sony equipment adjacent to each other so
that you can control both the projection TV and the connected equipment by using the
projection TV’s remote control at the same time (see page 17).
• The WEGA Theatre and center speaker modes are automatically cancelled when you change
the program number, video input or turn the projection TV off and on again.
• When the projection TV is in the center speaker mode, you cannot use the Twin pictures
feature, change the surround sound and the “Intelligent Volume” mode.
• Some Sony equipment might not respond properly when WEGA THEATRE button is
pressed. In this case, use the equipment’s own remote control.
• To use the projection TV’s speakers as the center speaker, you can also display “Center
Speaker” from “Sound” menu and select “On” (see page 22).
123
46
789
0
5
WEGA
THEATRE
VIDEO
RETURN
A/B
PROG INDEX
GATE
OPTION
TV
PROG
WEGA
2 +/–
WEGA
THEATRE
01GB05AVD-STTInd.p65 16/9/05, 10:48 AM13
Black

14 Advanced Operations
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
xViewing two programs at the same
time
BKP-FR53M94 only
With the Twin pictures feature, you can display two
different TV program or video input at the same time.
To
display Twin pictures
select a program number
in the right picture
swap the left and right pictures
swap sound between the
left and right pictures
change the screen size
of the Twin pictures
Selecting TV program from “TV” in WEGA GATE menu (see page 18) using
PAP (Picture And Picture)
You can select your desired TV program directly from the right picture by using Vor
vbuttons.
1. Press Vor vuntil the desired program appears on the right picture.
2. Press (or b) to display the right picture in full screen.
Notes
• You cannot change the picture size or swap the two pictures in the PAP mode.
• Swapping the pictures is not available for HD (high-definition) and DVD input signals in
Twin mode.
• HD and DVD input signals are not available in the right picture.
• The Twin pictures feature is not available when the projection TV is in the center speaker
mode (see page 13) and you cannot set the projection TV to the center speaker mode while
viewing the Twin pictures.
• You can only enjoy stereo sound from the left picture.
• You cannot change the picture to a video input in the right picture. You can only display a
video input, except for HD and DVD input signals, in the right picture by swapping the
pictures when a video input is displayed in the left picture.
• The picture and sound from the T(monitor output) terminals will always be from the left
picture, even when you select the sound from the right picture by swapping the sound.
• Due to different video processors used, it is normal that the picture quality of the right picture
might be slightly different from the left picture.
123
46
789
0
5
WEGA
THEATRE
VIDEO
RETURN
A/B
PROG INDEX
GATE
OPTION
TV
PROG
WEGA
V/v/B/b
10 8
Press
.
To cancel, press the button
again.
Vor v.
.
B or b once.
A “ ” symbol will appear
to indicate which screen
you are hearing.
Hold B to increase the left
screen size.
Hold b to increase the
right screen size.
Sound will swap
automatically to the screen
which is increasing in size.
01GB05AVD-STTInd.p65 16/9/05, 10:48 AM14
Black

15
Advanced Operations
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
123
46
789
0
5
WEGA
THEATRE
VIDEO
RETURN
A/B
PROG INDEX
GATE
OPTION
TV
PROG
WEGA
xDisplaying multiple programs
BKP-FR53M94 only
The Program Index feature displays all tuned TV programs scrolling on the
screen for direct selection.
1Press PROG INDEX.
The current program is displayed on the left.
The first tuned program is displayed on the
bottom right of the screen, then frozen.
It scrolls up and the next program appears on
the bottom-right until all tuned programs
appear one by one.
2Press Vor vuntil the program you want to
view is displayed in the frame, then press .
To return to scrolling, press Vor vagain.
3Press again to enlarge the selected
program into the left frame.
4Press PROG INDEX.
The selected program is displayed in full
screen.
Note
• When displaying multiple programs, only the sound of the left picture is heard.
V/v/
PROG INDEX
8
10
10
,,
8
,
1432
01GB05AVD-STTInd.p65 16/9/05, 10:49 AM15
Black

16 Advanced Operations
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
x Enjoying stereo or bilingual programs
You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.
When receiving a NICAM program
Broadcasting On-screen display (Selected sound)
NICAM
stereo
NICAM
bilingual
NICAM
monaural
When receiving an A2 program
Broadcasting On-screen display (Selected sound)
A2
stereo
A2
bilingual
Note
• If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound
becomes monaural but the noise is reduced.
A/B
NICAM
(Stereo sound)
Mono
(Regular sound)
t
t
NICAM Main
(Main sound)
NICAM Sub
(Sub sound)
Mono
(Regular sound)
tt
t
NICAM Main
(Main sound)
Mono
(Regular sound)
t
t
Mono
(Regular sound)
Stereo
(Stereo sound)
t
t
Main
(Main sound)
Sub
(Sub sound)
t
t
123
46
789
0
5
WEGA
THEATRE
VIDEO
RETURN
A/B
PROG INDEX
GATE
OPTION
TV
PROG
WEGA
01GB05AVD-STTInd.p65 16/9/05, 10:49 AM16
Black

17
Advanced Operations
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
xOperating optional components
You can use the supplied remote to operate Sony audio/video equipment.
Setting up the remote to work with other connected equipment
While keeping VIDEO ?/1 For example, to operate a
pressed, press the corresponding Sony 8 mm VCR:
number button for the desired
equipment (see the chart
below).
To control Hold down VIDEO ?/1 and press
Audio System 1, 1x, 2 or 3 0, 1, 2 or 3
DVD 1, 2 or 3 4, 5 or 6
VTR1 (Beta), VTR2 (8 mm) or VTR3 (VHS) 7, 8 or 9
+
VIDEO
8
To Press
turn on/off VIDEO ?/1
play Nwhile keeping OPTION pressed.
stop xwhile keeping OPTION pressed.
fast forward/ step forward or rewind/ >or .while keeping OPTION
step backward pressed.
pause Xwhile keeping OPTION pressed.
Press again to resume normal playback.
mute the sound while keeping OPTION pressed.
(Audio System 1, 1x, 2 or 3 only)
adjust volume 2 +/– while keeping OPTION pressed.
(Audio System 1, 1x, 2 or 3 only)
Operating audio/video equipment
Press VIDEO @/1or while keeping OPTION pressed, press N, x, .,
>, X, or 2 +/– (see the chart below).
Notes
• If the equipment does not have a certain function, the corresponding button on the remote
will not operate.
• Some equipment might not respond properly to buttons on projection TV’s remote. In this
case, use the equipment’s own remote control.
01GB05AVD-STTInd.p65 16/9/05, 10:49 AM17
Black

18 Menu Adjustment
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
Menu Adjustment
01
02
03
04
05
06
07
TV
Confirm:
Select:
End:
External Inputs
Confirm:
Select:
End:
Video
1
2Video
HD/DVD 1
HD/DVD 2
3Video
4
1
2
Video
1
2
3
4
Picture
Select:
End:
Confirm:
WEGA GATE
Picture Mode:
DRC-MF:
Vivid
Picture Adjustment
Off
3D-NR:
DRC1250
DRC-MF:
xIntroducing the WEGA GATE
navigator
WEGA GATE is a gateway that allows you access to preset TV channels,
connected external inputs and “Settings” menu.
watch the preset TV
channels (see pages 7
and 14)
select the inputs for the
connected equipment
(see page 28)
change the settings
of your projection
TV (see page 19)
How to use WEGA GATE
(1) Press WEGA GATE to display or cancel
the WEGA GATE menu.
Confirm:
Select:
WEGA GATE
Settings
External Inputs
TV
(3) Press V or vto select the desired item.
(4) Press RETURN to move to the previous
level.
(2) Press (or b) to confirm your selection
or go to the next level.
“TV”
“External
Inputs”
“Settings”
Confirm:
Select:
WEGA GATE
Settings
External Inputs
TV
01
02
03
04
05
06
07
TV
Confirm:
Select:
End:
TV
Confirm:
Select:
End:
01
02
03
04
05
06
07
Tip
• The WEGA GATE, and V,v,B,bbuttons on the front panel can also be used for the
operations above.
Confirm:
Select:
WEGA GATE
Settings
External Inputs
TV
01GB05AVD-STTInd.p65 16/9/05, 10:49 AM18
Black

19
Menu Adjustment
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
x“Settings” Adjustment
You are able to change the settings of your projection TV from “Settings” in WEGA
GATE menu.
Press WEGA GATE button to display WEGA GATE menu. Press Vor vto select
“Settings” and press .
The following is an overview of the items that can be adjusted.
Picture
Select:
End:
Confirm:
WEGA GATE
Picture Mode:
DRC-MF:
Vivid
Picture Adjustment
Off
3D-NR:
DRC1250
DRC-MF:
”Picture” (see page 21)
“DRC-MF”: “DRC1250” “DRC100” “Progressive”
“Picture Mode”: “Vivid” “Standard” “Custom”
“Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”,
“Sharpness”, “Color Temperature”,
“Reset”
“3D-NR”: “On” “Off”
Sound
Select:
End:
Confirm:
WEGA GATE
Balance
Off 00
Intelligent Volume:
Off
Surround:
Off
Center Speaker:
Dynamic
Sound Adjustment
Sound Mode:
”Sound” (see page 22)
“Sound Mode”: “Dynamic” “Standard” “Custom”
“Sound Adjustment”: “Treble”, “Bass”, “BBE”*, “Reset”
“Balance”
“Intelligent Volume”: “On” “Off”
“Surround”: “TruSurround” “Simulated” “Off”
“Center Speaker”: “On” “Off”
Wide Screen
Select:
End:
Confirm:
WEGA GATE
Auto Wide: Off
4:3
Wide Mode:
Multi Picture
Select:
End:
Confirm:
WEGA GATE
Swap
Program Index
Off
Twin:
”Wide Screen” (see page 23)
“Wide Mode”: “16:9” “4:3”
“Auto Wide”: “On” “Off”
”Multi Picture” (KP-FR53M94 only) (see page 24)
“Twin”: “On” “Off”
“Swap”
“Program Index”
continue
01GB05AVD-STTInd.p65 16/9/05, 10:49 AM19
Black

20 Menu Adjustment
Sony KP-FR43M94 Group N5 (GB)_2-656-413-11 (1)
Channel Setup
Select:
End:
Confirm:
WEGA GATE
TV System: B/G
Program Sorting/Edit
Manual Program
Auto Program
”Channel Setup” (see page 25)
“Auto Program”
“Manual Program”
“Program”: “00” - “99”
“TV System”: “B/G” “I” “D/K” “M”
“VHF Low”/“VHF High”/“UHF”
“Fine”: “Auto” “Manual”
“Signal Booster”: “Auto” “Off”
“Sensitivity”: “High” “Low”
“TV System”: “B/G” “I” “D/K” “M”
“Program Sorting/Edit”
Setup
Select:
End:
Confirm:
WEGA GATE
WEGA Theatre Setup
Off
Game Mode:
Video Label
Auto
Color System:
Off
Eco Mode:
English
Convergence
Language:
Note
• When a feature is dimmed in the menu, it is not selectable.
* Licensed by BBE Sound, Inc. under USP4638258, 4482866.
“BBE” and BBE symbol are trademarks of BBE Sound, Inc.
”Setup” (see page 27)
“Language”: “English” “ ” (Chinese) “ ” (Arabic)
“ ” (Thai)
“Convergence”: “Digital Quick Focus”, “Manual Adjust”
“WEGA Theatre Setup”: “Direct Input”, “Speaker”
“Game Mode”: “On” “Off”
“Video Label”: “Video Input” , “Label”
“Color System”: “Auto” “PAL” “SECAM”
“NTSC3.58” “NTSC4.43”
“Eco Mode”: “On” “Off”
“S input”: “Auto” “Off”
“Factory Settings”: “Yes” “No”
continued
01GB05AVD-STTInd.p65 16/9/05, 10:49 AM20
Black