KP-46WT500
Hi-Scan 1080i™ 16:9 Projection Television
Digital Reality Creation™ MultiFunction This Sony proprietary tech-
nology displays four times the picture resolution compared to conventional
TV’s for the very best in picture quality. A basic distraction of today’s “NTSC”
television system is its scanning structure of 480i scanning lines of interlaced
video. The bigger the screen size, the more apparent scanning lines
become. DRC™ MultiFunction circuitry minimizes the visibility of those
annoying scan lines producing a picture that rivals High Definition. Unlike
conventional line doublers, this real time digital bitmapping process replaces
analog NTSC patterns with their High Definition digital equivalents. The result
is four times the picture density of conventional television.
CineMotion™ Reverse 3-2 Pull-Down Technology Is a fixed algo-
rithm irrespective of source which preserves the integrity of movie film
frames to create the best possible image.
Multi-Image Driver (MID™-X) With Sony’s flexible Twin-View™ 2 Tuner
Picture and Picture a person can watch two full motion pictures side by side.
Together Twin-View and Sony’s proprietary MID-X allows the customer to
watch analog (NTSC) along side of HDTV at the same time on the same
screen. This circuitry also allows you to zoom in and out of these images to
customize the Picture and Picture environment. Also, with MID-X, both
images are improved to 480 progressive image quality.
HD Detailer™ Wide Band Video Amplifier When a video signal
leaves the video processor, it is only a few volts, which is not enough to drive
the CRT. The signal then goes through a video amplifier to deliver a usable
signal to the CRT. The bandwidth rating of this video amp is very important,
although the original video source may contain a great level of detail (e.g.
higher frequency data from an HD source), if the video amp is rated at a
lower frequency, it will not allow this greater detail to be shown.
DVI - HDTV Interface (Digital Visual Interface) The DVI - HDTV
Interface has been added for the latest generation in high definition television
connectivity. A single wire delivers a full digital, uncompressed HD signal that
can be received from any DVI set top box.
Specifications
Inputs and Outputs
• Component Video
(Y/Pb/P
r) Inputs x 2 HD
Capable
• DVI-HDTV Interface
• Front A/V Input x 1
• Front S-Video Input x 1
• Composite Video Input x 3
• S-Video Input x 2
• RF Input x 2
• Control S In/Out
General
• Power Requirements:
AC120V, 60Hz
• Power Consumption
(Standby): W 0.95
• Power Consumption (in
Operation): W 260
Accessories
Supplied Accessories
• Instruction Manual
• Remote Control
• AAA Batteries (2)
Optional Accessories
• A/V Stand SU-46WT5
Weights & Measures
(Approx)
• Dimensions (Approx):
(W x H x D):
42.8" x 40.2" x 24"
(1086 x 1020 x 609mm)
• Weight: 143 lbs. (65kg)
ADDITIONAL FEATURES
KEY TECHNOLOGY
Product Information
©2002 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony, CineMotion, Hi-Scan, Jog Dial, Precision Drive, Memory Stick, Hi-Scan,1080i, DRC, Digital Reality
Creation, Trinitron, DynaBlack, HD Detailer, Uniform Brightness Screen, MicroFocus, ClearEdge and WEGA are trademarks of Sony. Dolby Digital is a registered trademark of Dolby Laboratories Licensing Corporation. dts is a
registered trademark of Digital Theater Systems, Inc. All other trademarks and logos are property of their respective owners.
*All Sony digital still cameras and camcorders except models DSC-700 and DSC-770 store images on a Memory Stick in the DCF file format, which is required for playback on these televisions. If the image file is re-named or
manipulated, the DCF file format must be restored before playback is possible. Images captured on all other digital still cameras and camcorders will need to be formatted on a PC to the DCF file format (with third party soft-
ware not supplied with the television) before they can be viewed.
