Sony HDW2000/20 User manual

Sony Digital Recorder and Player
HDW-2000 Series
High Definition Video System
TM

2
HDCAM-Mainstream Workhorse in HDTV Production

Since introducing its first model in 1997, Sony has enhanced the
HDCAMTM Series of products, continually reinforcing its support to
the emerging DTV agendas around the world. Followed by the
introduction of the HDW-F900 multi-frame rate camcorder and its
companion HDW-F500 VTR, HDCAM has revolutionized the world
of movie making, now popularly recognized by the name CineAltaTM.
With the rapid proliferation of HD in video productions, Sony
introduced its second generation of HDCAM products, the
HDW-2000 Series VTR and its counterpart HDW-750 camcorder.
These models continue to present a cost-effective and feature
enhanced HD solution, focused on streamlining the migration
process to full DTV operations. The HDW-2000 Series includes
invaluable functions such as legacy playback of standard definition
BETACAMTM formats and internal up/down-conversion*1capabilities –
crucial features for bi-directional exchange of program material
between the co-existing SDTV and HDTV infrastructures.
Today, Sony further enhances its HDCAM product line with the
addition of the HDW-S2000*2and HDW-D2000 VTRs, and the
HDW-730S camcorder – all cost-effective models tailored to meet
the evolving needs of high definition production. Incorporating the
fundamental functions of the HDW-2000 Series, the HDW-S2000
and HDW-D2000 broaden the choice of HDW models, allowing
users to select the most appropriate HDCAM VTR for each specific
need. The HDW-S2000 and HDW-D2000 provide a different
combination of BETACAM format playback capabilities - the
HDW-S2000 replays BETACAM SXTM, BETACAM SPTM, and
BETACAM, while the HDW-D2000 plays back MPEG IMXTM and
Digital BETACAMTM. Both models record and playback 1080 HD
pictures in interlace 50i, 59.94i and progressive 25PsF, 29.97PsF
modes. They also allow playback of 24PsF and 23.98PsF HDCAM
material, serving as a cost-effective entrance to CineAlta operations.
With a rich choice of models, and the high quality and operability
that the HDCAM format is renowned for, the HDW-2000 Series VTR
offers an economically well-balanced solution for HDTV
programming.
*1 Down conversion is not available for tapes played back at 23.98 or 24 frames.
*2 The HDW-S2000 refers to both the HDW-S2000 and HDW-S2000P.
3

High-Definition Picture Quality
with HDCAM Format
The HDW-2000 Series recorders/player adopt
the proven HDCAM format, recording
high-definition component digital signals using
the state-of-the-art HDCAM compression
technology. This excellent compression scheme
maintains a high video bit rate of 140 Mb/s
(data rate on tape of 185 Mb/s). The format
combines superb picture quality with the high
reliability and robustness of 1/2-inch tape
integrated into a design approach inherited from
the BETACAM Series.
Compact, Affordable High-Definition
Video Cassette Recorder/Player
with Legacy Playback
The HDW-2000 Series high-definition VTRs are not only
affordable, they also provide a smooth migration path into
the HDTV world. Five different models are available to suit
budgetary and operational needs. In addition to HDCAM
recording/playback, the HDW-2000 Series VTRs are
equipped with backward playback capability for current
1/2-inch tape formats*; Digital BETACAM, MPEG IMX,
BETACAM SX, BETACAM SP and BETACAM. However,
the HDW-2000 eliminates this capability in order to
provide utmost cost efficiency. With its
affordability and different choice of feature
sets, the HDW-2000 Series is destined to be
a true workhorse in broadcast stations and
ENG applications.
*Playback-compatible formats vary by product.
4
Features
HEAD POSITION
Drum Head Allocation
HDW-2000 Series Line-up
HDW-2000
HDW-M2000
HDW-M2000P
HDW-D2000
HDW-S2000
HDW-S2000P
HDW-M2100
HDW-M2100P
Recording Format
HDCAM
HDCAM
HDCAM
HDCAM
Playback Format
HDCAM
HDCAM, Digital BETACAM, MPEG IMX, BETACAM SX,
BETACAM SP, BETACAM
HDCAM, Digital BETACAM, MPEG IMX
HDCAM, BETACAM SX, BETACAM SP, BETACAM
HDCAM, Digital BETACAM, MPEG IMX, BETACAM SX,
BETACAM SP, BETACAM
HD Digital Video Cassette Recorder
HD Digital Video Cassette Recorder
HD Digital Video Cassette Recorder
HD Digital Video Cassette Recorder
HD Digital Video Cassette Player

Wide Array of Signal Formats*1
The HDW-2000 Series can playback a wide variety of legacy
SDTV VTR formats in addition to the HDCAM format. Since
the HDW-2000 Series can output signals in 1080i, 576i and
480i, each format is reproduced in its corresponding vertical
resolution.
As an even greater advantage, the HDW-2000 Series has up
and down converters built-in so a program originated for
SDTV can be up converted for HDTV transmission, and
materials that were made in the HD format can be down
converted as “Super-sampled” SD images. This is a distinct
advantage of the HDW-2000 Series. The “Super-sampled”
HD origination produces standard definition 480 and 576-line
NTSC/PAL signals which are superior to those originated in
standard definition (their horizontal and vertical MTFs are
higher and the associated scanning aliasing is less).
Furthermore, a 720P progressive output is available for
integration into 720P-based systems.
*2
*1 Excludes the HDW-2000.
*2 For output of the 720P signal, an upgrade of software, hardware, or both may be
required. Please consult your nearest Sony office.
Interlace, Progressive Switchable
Operation
The HDW-2000 Series recorders provide recording and
playback capability of the HDCAM format in 1080/59.94i,
1080/50i, 1080/29.97PsF and 1080/25PsF frame rates.*1
The HDW-2000 Series also allows legacy playback of both
480/59.94i and 576/50i on the same deck*1. This flexibility
makes the HDW-2000 Series an extremely effective tool for
international programming. Furthermore, to meet the
increasing needs of 24P program creation, the
23.98PsF/24PsF recordings can be converted to a 25PsF
signal with appropriate conversion of time code.*2
*1 The frame rate of the source tape cannot be converted at the output between
1080/59.94i and 1080/50i or between 480/59.94i and 576/50i. Playback of a 576-line
analog BETACAM tape on the HDW-M2000/S2000/M2100 (NTSC model), and playback
of a 480-line analog BETACAM tape on the HDW-M2000P/S2000P/M2100P
(PAL model) is for monitoring purpose only.
*2 Requires audio pitch correction. Down conversion and/or “pull-down” of tapes played
back at 23.98PsF or 24PsF frame rate are not provided.
Long Recording Time on a Single Cassette
Utilizing the HDCAM format’s high-density recording
capability and compression technology, the HDW-2000
Series provides a long recording time of 124 minutes at
1080/59.94i and 149 minutes at 1080/50i per one L cassette.
Small size cassettes can also be used, which provide 40
minutes recording at 1080/59.94i and 48 minutes at
1080/50i. This flexibility allows the HDW-2000 Series to
cover a wide range of applications including news, sports
and production.
5
Conventional 480/576-line
Digital VTR
Multi-burst Chart ”Super-sampled“ HDCAM
Down-Converted signals
Digital Audio and Dolby®*Recording
The HDCAM format records four channels (two AES/EBU
stereo pairs) of non-compressed digital audio (20 bit at 48
kHz). The HDW-2000 Series recorders can also record
non-audio data streams within the audio recording area by
packaging the data within an AES/EBU wrapper.
Furthermore, the HDW-2000 recorders can record Dolby-E
and Dolby AC-3 data (non-audio) streams on the audio
tracks.
* Dolby and the double-D symbol are trademarks of Dolby Laboratories Inc.

- HD SDI I/O*
- SDI output (D1 component)
- SDTI I/O*
(optional-requires HKDW-102
SDTI Interface Board)
- Analog Component output
6
Compact Design and Low Power
Consumption
This Series features a compact 4RU-size* design and weighs
only 50 lb 11 oz (23 kg) – 26 lb 7 oz (12 kg) lighter than the
HDW-500 HD Video Recorder. It also has low power
consumption of 220 W. This compactness and low power
consumption are suited to not only studio use but also
installation into OB-vans.
*4RU size=16 7/8 x 6 7/8 x 21 1/2 inches (427 x 174 x 540 mm)
*The HDW-M2100/M2100P player provides outputs only.
- Analog Composite
output
(NTSC/PAL)
- Digital Audio I/O*(AES/EBU)
- Analog Audio I/O*
- Audio Monitor
output
(2-ch analog)
Versatile Interfaces
The HDW-2000 Series features a wide range of interfaces
including;
User-friendly Control Panel
Control panels are compact, yet comprehensive. There is a
minimal learning curve since its design and functionality are
inherited from universally used BETACAM SP VTRs. In
addition, the control panel has a multi-function display that
provides comprehensive information for quick access and
easy control of a variety of functions. Dedicated control
knobs and meter displays are included for each of the four
audio channels.
Using the optional control panel HKDW-101, VTRs can be
controlled from the same control panel simultaneously.
Easy Maintenance
Most of the circuitry of the HDW-2000 Series is arranged on
plug-in boards to allow quick and easy maintenance. The
drum assembly has been designed to achieve simple,
low-cost maintenance by adopting an upper drum
mechanism and an auto adjustment function as used in
MPEG IMX VTRs and BETACAM SX recorders. This helps to
drastically reduce the time required for periodic drum
replacement.
Features
HKDW-101 Control Panel with BKMW-102 Case
HDW-M2000

7
Frame Accurate Editing
The HDW-2000 Series recorders enable insert or assemble
editing with frame accuracy. Each channel of video and
audio signal is independently editable. It is possible to
execute precise editing on HDCAM tapes in
machine-to-machine or A/B roll configurations.
High Speed Color Picture Search
Recognizable color pictures are provided in shuttle mode at
speeds up to ±50 times normal playback.
Dynamic Tracking™Playback
A Dynamic Tracking playback capability provides high
quality pictures over the range of -1 to +2 times normal
playback speed during playback of HDCAM tapes, -1 to +3
times for BETACAM/BETACAM SP/MPEG IMX/Digital
BETACAM tapes, -1 to +2 for BETACAM SX tapes.
Digital Jog Sound
Reproduction of four (eight for MPEG IMX) channels of
digital audio is achieved, in the Jog mode. With a
responsiveness and sound quality reminiscent of BETACAM
SP machines, this feature is helpful in quickly and precisely
establishing an editing point while monitoring the digital
audio signals which remain in absolute sync with the
pictures.
Audio Crossfade Function
As with all Sony half-inch professional formats, the
HDW-2000 Series recorders feature Digital Audio Crossfade
to achieve smooth audio transitions at audio insert edit
points. Previously recorded audio signals are read in advance
using Pre-read heads and then re-recorded onto the same
track after being mixed with the input audio signal. The
crossfade duration can be selected from a range of values.
Operational
Convenience

8
Dynamic Motion Control (DMC) Playback
The HDW-2000 Series also provides a DMC playback
capability, memorizing the tape speed trajectory over the DT
speed range (-1 to +2 times normal speed).
Pre-read Editing
The HDW-2000 Series recorders are equipped with advanced
playback heads to enable pre-read editing. This function
allows application including titling with a
single VTR, A/B-roll with two VTRs, as well as audio mix
and channel swap.
1080/1035 Line Conversion
The HDW-2000 Series provides bi-directional vertical
filtering between the two active line standards of 1080
and 1035 and enhanced quality of variable speed Dynamic
Tracking playback as standard.
Selectable Picture Mode
Three modes of operation enable correct presentation,
depending on the application required.
Shot Marks
The HDW-2000 Series recorders can scan tapes with Shot
Marks and automatically detect their positions.
After scanning, a list of all the marks is displayed on the
video monitor, allowing easy cueing to any mark.
LETTER BOX mode
HD to SD, 16:9 HD picture is down-converted and
output as a 4:3 SD picture.
SD to HD, 4:3 SD picture is up-converted,
then output as a 16:9 HD picture.
HD to SD, 16:9 HD picture down-converted to SD and
output is presented in Letter-box on a 4:3 monitor.
SD to HD, 4:3 SD picture is cropped and
presented as a 16:9 picture.
SQUEEZE mode
HD to SD, edges of a 16:9 HD picture are cropped
in the down-converted 4:3 SD picture.
SD to HD, 4:3 SD picture up-converted as a 16:9 HD
picture, however the sides are cropped.
EDGE CROP mode
HDW-750 Series Menu HDW-2000 Series Time Code List
HDW-750

9
Operational Convenience
Metadata Handling
In the HDW-2000 Series, special care has been given to
metadata handling in order to increase production efficiency,
and to provide the utmost convenience in media asset
management systems and material distribution systems. In
general, metadata consists of user-defined data indicating
when, where, or by whom the material was created, Closed
Caption data, and a variety of other data describing the
material content.
Among such metadata, UMID, as standardized in SMPTE
330M, is a globally unique identifier used for the identification
of picture/audio material and data. UMID is automatically
generated within compatible equipment such as VTRs and
camcorders during each recording.
The HDW-2000 Series VTR provides the facility to record
UMID on tape when the VTR performs dubbing, editing, and
copying through up-/down-conversion. This recorded UMID
is used in subsequent processes from editing, archiving and on
to distribution, bringing efficiency throughout the entire
program production chain.
The HDW-2000 Series VTRs enables up to 255 bytes x 3
packets of metadata per field to be recorded, which can be
transferred to other devices via HD-SDI, or SDTI.
Optional Accessories
RCC-5G,
9-pin Remote Cable
HKDV-900,
HD Digital Video Controller*
BCT-124HDL/64HDL/22HD,
HDCAM Tape Cassette
BCT-HD12CL,
Cleaning Cassette
MLB-1M-100 Memory Label
(for Tele-File system)
*To connect the HKDV-900 with the HDW-2000
Series VTRs, the optional video controller cable,
RCC-1505H/1510H/1530H is required.
BKNW-1000 Series, ISR ProxyTM
Remote Monitoring and Maintenance
Software
BVR-50,
Video Controller
BKMW-102,
Remote Control Unit
BKMW-103,
Control Panel Extension Kit
HKDW-101,
Control Panel
RMM-131,
Rack Mount Kit
HKDW-102,
SDTI Interface Board

General
Input/output
Processor adjustment range
Digital video performance
Analog component output
performance
Analog composite output
performance
Digital audio performance
Analog audio output
performance
Cue track
Supplied accessories
100 to 240 V, 50/60 Hz
220 W
41 to 104 °F (+5 to +40 °C)
-4 to +140 °F (-20 to +60 °C)
25 to 90%
50 lb 11 oz (23 kg)
16 7/8 x 6 7/8 x 21 1/2 inches (427 x 174 x 544 mm)
96.7 mm/s (59.94i, 29.97PsF), 80.6 mm/s (50i, 25PsF), 77.4 mm/s (24PsF, 23.98PsF)
124 minutes (59.94i, 29.97PsF, with BCT-124HDL cassette)
149 minutes (50i, 25PsF, with BCT-124HDL cassette)
40 minutes (59.94i, 29.97PsF, with BCT-40HD cassette)
48 minutes (50i, 25PsF, with BCT-40HD cassette)
155 minutes (24PsF, 23.98PsF, with BCT-124HDL cassette)
50 minutes (24PsF, 23.98PsF, with BCT-40HD cassette)
Approx. 3 minutes (with BCT-124HDL cassette)
Still to ±50 times normal speed playback (59.94i, 29.97PsF), Still to ±58 times normal speed playback (50i, 25PsF),
Still to ±60 times normal speed playback (24PsF, 23.98PsF)
-1 to +2 times normal speed playback
Still to ±1 times normal speed playback
0.6 s or less (59.94i, 29.97PsF, from standby on), 0.7 s or less (50i, 25PsF, 24PsF, 23.98PsF, from standby on)
6 s or less (both L and S cassettes)
BNC x 2 (with a loop-through), Tri-level sync, 0.6 Vp-p, 75 Ω, sync negative or Black Burst or Composite,
0.3 Vp-p, 75 Ω, sync negative
XLR-3-pin type, female, x 1 (0.5 to 18 Vp-p,10 kΩ, balanced)
BNC x 3 (SMPTE 292M including one character out), Serial Digital (1.485 Gb/s)
BNC x 2 (SMPTE 305M), 270 Mb/s
BNC x 3 (SMPTE 259M including one character out), Serial Digital (270 Mb/s)
BNC x 3 (RS-170A, including one character out, one WFM out)
Y: 1.0 Vp-p, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
BNC x 3, for 1 set, 1.0 Vp-p, 75 Ω, sync negative
BNC x 4, AES/EBU
(CH 1/2, CH 3/4, CH 5/6, CH 7/8)
XLR-3-pin type, x 5, male, +4 dBm (600 Ω load), low impedance, balanced
XLR-3-pin type, male, x 1 (2.2 Vp-p, low impedance, balanced)
XLR-3-pin type, male, x 2 (+4 dBm at 600 Ω load, low impedance, balanced)
JM-60 Stereo phone jack (-∞to -12 dBu at 8 Ω load, unbalanced)
D-sub 9-pin, Sony 9-pin remote interface
D-sub 9-pin, Sony 9-pin remote interface
D-sub 9-pin
D-sub 50-pin
D-sub 9-pin, D-sub 15-pin
D-sub 15-pin
“Memory Stick”™ slot, PCMCIA slot
±3 dB/∞ to +3 dB, selectable
±3 dB/∞ to +3 dB, selectable
±3 IRE
±30°
±15 µs
±200 ns
Y: 74.25 MHz, R-Y/B-Y: 37.125 MHz
10 bit/sample (compression: 8 bit/sample)
Coefficient recording system
S-I-NRZI PR-IV
Reed-Solomon code
Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 to 2.75 MHz +0.5 dB/-2.0 dB
56 dB or more
1% or less
Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 to 2.75 MHz +0.5 dB/-2.0 dB
53 dB or more
2% or less
2% or less
20 ns or less
1% or less
Based upon RS-170A/CCIR R.624-3
48 kHz (Syncronized with video)
20 bit/sample
Below measurable level
20 dB (or 18 dB selectable)
T1=50 µs, T2=15 µs (on/off selectable in recording mode)
20 bit/sample
20 bit/sample
20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB at 1 kHz)
More than 95 dB (at 1 kHz, emphasis ON)
Less than 0.05% (at 1 kHz, emphasis ON, reference level)
Less than -80 dB (at 1 kHz, between any two channels)
100 Hz to 12 kHz ±3 dB
More than 45 dB (at 3% distortion level)
Less than 2% (T.H.D. at 1 kHz, reference level)
Less than 0.2%
Operation manual (1), Installation manual (1)
Power requirements
Power consumption
Operating temperature
Storage temperature
Humidity
Weight
Dimensions (W x H x D)
Tape speed
HDCAM Record/playback time
HDCAM playback time
Fast forward/rewind time
Search speed
range
Servo lock time
Load/unload time
HD-SDI input
SDTI input (with optional HKDW-102 installed)
Reference video input
Digital audio input (CH 1/2, CH 3/4)
Analog audio input
(CH 1/2/3/4/Cue)
Time code input
HD-SDI output
SDTI output (with optional HKDW-102 installed)
SDI output
Analog composite output
Analog component output
Digital audio output
Analog audio output (CH 1/2/3/4)
Time code output
Monitor output L/R
Headphones
Remote1 In
Remote1 Out
RS-232C
Remote2 Parallel I/O
Video control
Control panel
Others
Video level
Chroma level
Set up/black level
Chroma phase/hue
System sync phase
System SC phase
Y/C delay
Sampling frequency
Quantization
Compression
Channel coding
Error correction
Bandwidth
S/N ratio
K Factor (2T Pulse)
Bandwidth
S/N ratio
Differential gain
Differential phase
Y/C delay
K Factor (2T Pulse)
Output SCH phase
Sampling frequency
Quantization
Wow & flutter
Headrooms
Emphasis (ON/OFF selectable in REC mode)
A/D quantization
D/A quantization
Frequency response
Dynamic range
Distortion
Crosstalk
Sampling frequency
S/N ratio
Distortion
Wow & flutter
Erase ratio
96.7 mm/s
64.5 mm/s (525/59.94), 53.8 mm (625/50)
59.6 mm/s
118.6 mm/s (525/59.94), 101.5 mm/s (625/50)
Still to ±50 times normal speed playback
Still to ±78 times normal speed playback
Still to ±78 times normal speed playback
Still to ±35 times normal speed playback (525/59.94)
Still to ±42 times normal speed playback (625/50)
-1 to +3 times normal speed playback
-1 to +3 times normal speed playback
-1 to +2 times normal speed playback
-1 to +3 times normal speed playback
±100 ns
HDW-2000 Series Specifications
10
HDW-M2000/M2000P HDW-M2100/M2100PHDW-2000
HDCAM
Digital BETACAM
MPEG IMX
BETACAM SX
BETACAM/BETACAM SP
Shuttle mode
HDCAM
Digital BETACAM
MPEG IMX
BETACAM SX
BETACAM/BETACAM SP
Variable mode
HDCAM
Digital BETACAM
MPEG IMX
BETACAM SX
BETACAM/BETACAM SP
Jog mode
More than 60 dB
BNC x 1 (SMPTE 292M), Serial Digital (1.485 Gb/s)
BNC x 1 (SMPTE305M), 270 Mb/s
BNC x 2, AES/EBU
XLR-3-pin type, female, x 5
Low off: -60 dBu, high impedance, balanced
High off: +4 dBu, high impedance, balanced
High on: -4 dBm, 600 Ω termination, balanced

HDCAM
Digital BETACAM
MPEG IMX
BETACAM SX
BETACAM/BETACAM SP
Shuttle mode
HDCAM
Digital BETACAM
MPEG IMX
BETACAM SX
BETACAM/BETACAM SP
Variable mode
HDCAM
Digital BETACAM
MPEG IMX
BETACAM SX
BETACAM/BETACAM SP
Jog mode
100 to 240 V, 50/60 Hz
220 W
41 to 104 °F (+5 to +40 °C)
-4 to +140 °F (-20 to +60 °C)
25 to 90%
50 lb 11 oz (23 kg)
16 7/8 x 6 7/8 x 21 1/2 inches (427 x 174 x 544 mm)
96.7 mm/s (59.94i, 29.97PsF), 80.6 mm/s (50i, 25PsF), 77.4 mm/s (24PsF, 23.98PsF)
124 minutes (59.94i, 29.97PsF, with BCT-124HDL cassette)
149 minutes (50i, 25PsF, with BCT-124HDL cassette)
40 minutes (59.94i, 29.97PsF, with BCT-40HD cassette)
48 minutes (50i, 25PsF, with BCT-40HD cassette)
155 minutes (24PsF, 23.98PsF, with BCT-124HDL cassette)
50 minutes (24PsF, 23.98PsF, with BCT-40HD cassette)
Approx. 3 minutes (with BCT-124HDL cassette)
Still to ±50 times normal speed playback (59.94i, 29.97PsF), Still to ±58 times normal speed
playback (50i, 25PsF), Still to ±60 times normal speed playback (24PsF, 23.98PsF)
-1 to +2 times normal speed playback
Still to ±1 times normal speed playback
0.6 s or less (59.94i, 29.97PsF, from standby on), 0.7 s or less (50i, 25PsF, 24PsF, 23.98PsF, from standby on)
6 s or less (both L and S cassettes)
BNC x 1 (SMPTE 292M), Serial Digital (1.485 Gb/s)
BNC x 1 (SMPTE305M), 270 Mb/s
BNC x 2 (with a loop-through), Tri-level sync, 0.6 Vp-p, 75 Ω, sync negative or Black Burst or Composite, 0.3
Vp-p, 75 Ω, sync negative
BNC x 2, AES/EBU
XLR-3-pin type, female, x 5
Low off: -60 dBu, high impedance, balanced
High off: +4 dBu, high impedance, balanced
High on: -4 dBm, 600 Ω termination, balanced
XLR-3-pin type, female, x 1 (0.5 to 18 Vp-p,10 kΩ, balanced)
BNC x 3 (SMPTE 292M including one character out), Serial Digital (1.485 Gb/s)
BNC x 2 (SMPTE 305M), 270 Mb/s
BNC x 3 (SMPTE 259M including one character out), Serial Digital (270 Mb/s)
BNC x 3 (RS-170A, including one character out, one WFM out)
Y: 1.0 Vp-p, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
BNC x 3, for 1 set, 1.0 Vp-p, 75 Ω, sync negative
XLR-3-pin type, x 5, male, +4 dBm (600 Ω load), low impedance, balanced
XLR-3-pin type, male, x 1 (2.2 Vp-p, low impedance, balanced)
XLR-3-pin type, male, x 2 (+4 dBm at 600 Ω load, low impedance, balanced)
JM-60 Stereo phone jack (-∞to -12 dBu at 8 Ω load, unbalanced)
D-sub 9-pin, Sony 9-pin remote interface
D-sub 9-pin, Sony 9-pin remote interface
D-sub 9-pin
D-sub 50-pin
D-sub 9-pin, D-sub 15-pin
D-sub 15-pin
“Memory Stick”™ slot
±3 dB/∞ to +3 dB, selectable
±3 dB/∞ to +3 dB, selectable
±3 IRE
±30°
±15 µs
±200 ns
Y: 74.25 MHz, R-Y/B-Y: 37.125 MHz
10 bit/sample (compression: 8 bit/sample)
Coefficient recording system
S-I-NRZI PR-IV
Reed-Solomon code
Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 to 2.75 MHz +0.5 dB/-2.0 dB
56 dB or more
1% or less
Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 to 2.75 MHz +0.5 dB/-2.0 dB
53 dB or more
2% or less
2% or less
20 ns or less
1% or less
Based upon RS-170A/CCIR R.624-3
48 kHz (Syncronized with video)
20 bit/sample
Below measurable level
20 dB (or 18 dB selectable)
T1=50 µs, T2=15 µs (on/off selectable in recording mode)
20 bit/sample
20 bit/sample
20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB at 1 kHz)
More than 95 dB (at 1 kHz, emphasis ON)
Less than 0.05% (at 1 kHz, emphasis ON, reference level)
Less than -80 dB (at 1 kHz, between any two channels)
100 Hz to 12 kHz ±3 dB
More than 45 dB (at 3% distortion level)
Less than 2% (T.H.D. at 1 kHz, reference level)
Less than 0.2%
More than 60 dB
Operation manual (1), Installation manual (1)
96.7 mm/s
64.5 mm/s (525/59.94), 53.8 mm (625/50)
Still to ±50 times normal speed playback
Still to ±78 times normal speed playback
-1 to +3 times normal speed playback
-1 to +3 times normal speed playback
BNC x 4, AES/EBU
(CH 1/2, CH 3/4, CH 5/6, CH 7/8)
59.6 mm/s
118.6 mm/s (525/59.94), 101.5 mm/s (625/50)
Still to ±78 times normal speed playback
Still to ±35 times normal speed playback (525/59.94)
Still to ±42 times normal speed playback (625/50)
-1 to +2 times normal speed playback
-1 to +3 times normal speed playback
BNC x 2, AES/EBU
(CH 1/2, CH 3/4)
±100 ns
11
HDW-D2000 HDW-S2000/S2000P
General
Input/output
Processor adjustment range
Digital video performance
Analog component output
performance
Analog composite output
performance
Digital audio performance
Analog audio output
performance
Cue track
Supplied accessories
Power requirements
Power consumption
Operating temperature
Storage temperature
Humidity
Weight
Dimensions (W x H x D)
Tape speed
HDCAM Record/playback time
HDCAM playback time
Fast forward/rewind time
Search speed
range
Servo lock time
Load/unload time
HD-SDI input
SDTI input (with optional HKDW-102 installed)
Reference video input
Digital audio input (CH 1/2, CH 3/4)
Analog audio input
(CH 1/2/3/4/Cue)
Time code input
HD-SDI output
SDTI output (with optional HKDW-102 installed)
SDI output
Analog composite output
Analog component output
Digital audio output
Analog audio output (CH 1/2/3/4)
Time code output
Monitor output L/R
Headphones
Remote1 In
Remote1 Out
RS-232C
Remote2 Parallel I/O
Video control
Control panel
Others
Video level
Chroma level
Set up/black level
Chroma phase/hue
System sync phase
System SC phase
Y/C delay
Sampling frequency
Quantization
Compression
Channel coding
Error correction
Bandwidth
S/N ratio
K Factor (2T Pulse)
Bandwidth
S/N ratio
Differential gain
Differential phase
Y/C delay
K Factor (2T Pulse)
Output SCH phase
Sampling frequency
Quantization
Wow & flutter
Headrooms
Emphasis (ON/OFF selectable in REC mode)
A/D quantization
D/A quantization
Frequency response
Dynamic range
Distortion
Crosstalk
Sampling frequency
S/N ratio
Distortion
Wow & flutter
Erase ratio
HDW-2000 Series Specifications

©2005 Sony Corporation. All rights reserved.
Reproduction in whole or in part without the written permission of Sony is prohibited.
Features and specifications subject to change without notice.
All non-metric weights and measures are approximate.
Sony and HDVS are registered trademarks of Sony Corporation, Japan.
HDCAM, BETACAM, BETACAM SP, BETACAM SX, Digital BETACAM, MPEG IMX,
Dynamic Tracking and Tele-File are trademarks of Sony Corporation, Japan.
All other trademarks are property of their respective owners.
V-2007-C
MK07597V4
Video performance
Audio perfomance
Bandwidth
S/N ratio
K factor (2T pulse)
Frequency response
Dynamic range
Distortion
0 to 5.75 MHz +0.5 dB/-2.0 dB
0 to 2.75 MHz +0.5 dB/-2.0 dB
56 dB or more
1% or less
20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB at 1 kHz)
90 dB or more (at 1 kHz, emphasis ON, 16 bits/48 kHz)
0.05% or less (at 1 kHz, emphasis ON, reference level (+4 dBm))
MPEG IMX playback(HDW-M2000/M2000P, HDW-M2100/M2100P, HDW-D2000)
Y
R-Y/B-Y
3% or less
4% or less
20 ns or less
20 Hz to 20 kHz +0.5 dB/-2.0 dB
More than 72 dB (CCIR 468-3 weighted)
Less than 0.5%
Oxide tape
25 Hz to 4.0 MHz +0.5 dB/-6.0 dB
25 Hz to 1.5 MHz +0.5 dB/-3.0 dB
46 dB or more
45 dB or more
3% or less
50 Hz to15 kHz ±
3.0 dB
62 dB or more (Dolby NR off)
2% or less
3% or less
4% or less
20 ns or less
0.1% rms or less
20 Hz to 20 kHz +0.5 dB/-2.0 dB
85 dB or more
0.5% or less
Bandwidth
S/N ratio
K-Factor (2T Pulse)
LF non-linearity
Y/C delay
LNG
AFM*
Y
R-Y/B-Y
Y
R-Y/B-Y
Y
R-Y/B-Y
Frequency respomse
S/N ratio
T.H.D.
Wow & Flutter
Frequency response
S/N ratio
T.H.D.
Video performance
Digital audio (CH 1 to CH 4)
Analog audio (cue track)
Bandwidth
S/N ratio
K factor
Frequency response (0 dB at 1 kHz)
Dynamic range
Distortion (T.H.D. at 1 kHz, reference level)
Wow & flutter
Frequency response (0 dB at 1 kHz)
S/N ratio (at 3% distortion level)
Distortion (T.H.D. at 1 kHz, reference level)
Wow & flutter
0 to 5.75 MHz +0.5 dB/-0.5 dB
0 to 2.75 MHz +0.5 dB/-0.5 dB
62 dB or more
1% or more
20 Hz to 20 kHz +0.5 dB/-1.0 dB
95 dB (at 1 kHz, emphasis ON)
0.05% rms (emphasis ON)
Below measurable level
100 Hz to 12 kHz +3 dB/-3 dB
45 dB (at 1 kHz)
2% or less
HDW-M2000/M2100/D2000: Less than 0.5% rms
HDW-M2000P/M2100P/D2000:
Less than 0.2% (DIN 45508 weighted)
Digital BETACAM playback (HDW-M2000/M2000P, HDW-M2100/M2100P, HDW-D2000)
Video performance
Audio performance
Metal tape
30 Hz to 4.5 MHz +0.5 dB/-4.0 dB
30 Hz to 1.5 MHz +0.5 dB/-3.0 dB
51 dB or more
48 dB or more
2% or less
50 Hz to15 kHz +1.5 dB/-3.0 dB
72 dB or more
1% or less
Analog BETACAM playback (HDW-M2000, HDW-M2100, HDW-S2000)
Video performance
Audio perfomance
Bandwidth
S/N ratio
K factor (2T pulse)
Frequency response
Dynamic range
Distortion
HDW-M2000/M2100/S2000: 0 to 4.5 MHz +0.5 dB/-3.0 dB
HDW-M2000P/M2100P/S2000P: 0 to 5.5 MHz +0.5 dB/-3.0 dB
0 to 2.0 MHz +0.5 dB/-3.0 dB
56 dB or more
1% or less
20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB at 1 kHz)
90 dB or more (at 1 kHz, emphasis ON)
0.05% or less (at 1 kHz, emphasis ON, reference level (+4 dBm))
BETACAM SX playback (HDW-M2000/M2000P, HDW-M2100/M2100P, HDW-S2000/S2000P)
Oxide tape
30 Hz to 4.1 MHz +0.5 dB/-6.0 dB
30 Hz to 1.5 MHz +0.5 dB/-3.0 dB
48 dB or more
45 dB or more
3% or less
50 Hz to15 kHz +1.5 dB/-3.0 dB
50 dB or more (Dolby NR off)
2% or less
Bandwidth
S/N ratio
K-Factor (2T Pulse)
LF non-linearity
Y/C delay
LNG
AFM*
Y
R-Y/B-Y
Y
R-Y/B-Y
Y
R-Y/B-Y
Frequency respomse
S/N ratio
T.H.D.
Wow & Flutter
Frequency response
S/N ratio
T.H.D.
Y
R-Y/B-Y
Y
R-Y/B-Y
Video performance
Audio performance
Metal tape
25 Hz to 5.5 MHz +0.5 dB/-4.0 dB
25 Hz to 2.0 MHz +0.5 dB/-3.0 dB
48 dB or more
48 dB or more
2% or less
50 Hz to 15 kHz +1.5 dB/-3.0 dB
68 dB or more
1% or less
Analog BETACAM playback (HDW-M2000P, HDW-M2100P, HDW-S2000P)
0.1% rms or less
*The HDW-S2000 does not support AFM playback.
*The HDW-S2000P does not support AFM playback.
HDW-2000 Series Specifications
Printed in USA (2/05)
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
www.sony.com/professional