Sony SRW5800/2 User manual

HDCAM-SR Workflow Guide
- AJA KONA 3 capture card and driver version 7.5 for use with Mac OSX
- Double-speed transfer via AJA hardware and AJA software
When used alongside properly equipped Sony HDCAM-SR VTRs (such as the Sony SRW-5800), the AJA KONA 3 capture card
can be configured to ingest material at double normal speed or “DBL” speed. Double-speed transfer requires the use of the AJA
KONA 3 version 7.5 driver (or later) along with the AJA VTR Xchange version 4.1 software (or later).
The AJA VTR Xchange software is a free download from the AJA website. The AJA KONA 3 hardware and AJA VTR Xchange
software, along with the Sony HDCAM-SR VTR, provide this unique workflow to Mac OSX users. Ingested Quick Time file can be
instantly used in Final Cut Pro software.*
*Currently, double-speed ingest control is not supported directly via Apple’s Final Cut Pro software.
Double-speed transfer workflow
To capture HDCAM-SR material at double-speed:
1. Ensure that the HDCAM-SR VTR is connected to the AJA KONA 3 using a dual-link HD-SDI connection.
2. Set the HDCAM-SR VTR to 422DBL.
3. To properly ingest audio at double transfer speed, select the “Enable DBL Audio Capture” checkbox in the Setup tab of the AJA Control Panel
software application.
4. Open the AJA VTR Xchange software application.
5. From within the AJA VTR Xchange application, select “AJA Kona3-DBL” from the Device pulldown in the application’s Audio Capture Settings.
6. Select the appropriate video input format/frame rate for the double speed transfer via the VTR Xchange Video Settings pulldown menu.
Note that the video source name is appended with the “DBL” designation for double speed transfer.
7. Capture the clip.
AJA KONA 3 driver version 7.5 and
AJA VTR Xchange version 4.1 for use with Mac OSX
Supported Workflow
Double-speed transfer
1080/50p and 1080/60p capture
Applicable HDCAM-SR VTR
SRW-5800 with HKSR-5803HQ
SRW-5100 with HKSR-5103

©2010 Sony Corporation. All rights reserved.
HDCAM-SR Workflow Guide
1080p/60 or 1080p/50 Workflow
To capture 1080p 50, 1080p 59.94 or 1080p 60 material:
1. Ensure that the HDCAM-SR VTR is connected to the AJA KONA 3 using dual link.
2. Select the Dual Link radio button from the Inputs tab of the AJA Control Panel software application.
3. 1080p 50, 1080p 59.94 and 1080p 60 capture is supported by Apple’s Final Cut Pro or AJA’s VTR Xchange capture application.
4. If using Final Cut Pro, select the appropriate Easy Setup for 1080p 50, 1080p 59.94 or 1080p 60. If using AJA VTR Xchange, make the
appropriate format/frame rate selection in the Video Settings pulldown menu.
5. Capture the clip.
Contact
AJA Video Systems, Inc.
180 Litton Drive
Grass Valley, CA 95945
Phone [phone]
Fax [phone]
Website www.aja.com
MK10684V1OHB10MAR AJA