Soozier AA0-029 User manual

AA0-029

AVOID INJURY
• Please carefully read the installation instructions and user
manual before installation use. Follow the steps provided in
the instruction for use to avoid injury or damage.
• Improper use using this with items other than bicycles, or
in other applications may endanger the person or cause
damage.
AVOID DAMAGE
• To avoid damage to the bicycle, do not squeeze conduit
and/or cables with the retaining clamp.
• When using the stand for carbon or delicate frames, be
careful not to overtighten and damage the bicycle frame as
the clamp experts a lot of force. Only place the clamp on
the seat post to ensure the frame remains free of damage.
• Do not secure clamp on internal cable housings.
WARNING!
• Do not exceed the maximum load of 30 kgs. Exceeding the
maximum load risks injury and damage to the bicycle.
• Inspect all parts of the stand prior to each use to ensure
safety.
• Loose screws must be tightened and defective parts must
be replaced to avoid injury or damage.
• Ensure that the socket head screws connecting the upper
bar are always tight.
• Always put the bicycle work stand on a solid and stable
surface to avoid tipping.
• Always ensure the legs are out and stand is secure prior to
use.
• Never ride the bicycle when it is mounted on a stand.
• Keep away from children.
• Keep ngers and clothing away from moving parts.
• Do not modify or alter the stand.
To adjust the height, loosen and tighten the
release (c) between the supporting tube and
extension tube (see Figure 3-1).
You can loosen or tighten the release the
control joint (d) for the 2 feet (E) to fold or unfold
the stand (see Figures 3-1 and 3-2).
Tools Container
To keep the tool shelf (C) upright (see Figure 4-1).
Figure 3-1
Figure 3-2
Figure 4-1