212 Avenida Fabricante, San Clemente, CA 92672
TEL 800-592-4644 / 949-492-7777 • FAX 949-361-5151 • www.soundadvance.com
Recommended Installations:
• Suspended ceilings
• Wood or metal stud ceilings
• Soffits and fascia
• Retrofit into almost all standard 8" speaker openings
Recommended Environment:
• Indoor or weather-protected outdoor
Optional Accessories:
PBB8-10: Backcan for ducted air return ceilings
12-1/4" Dia x 4-1/4" D (311mm x 106mm);
10-1/4" Cutout Dia (260mm)
1.7 lb (0.7kg)
UMB8-10: Universal mounting bracket for solid or suspended ceilings
2.7 lb (1.23kg)
ECS8-10: Line-level enclosure compensation module for installations
using the PBB8-10 backcan
Performance Specifications:
Radiating Surface: 125 in2(806.5cm2) Planar Diaphragm
(fits standard 8" diameter speaker openings)
Driver System: 0.82 lb (0.37kg) Magnet with 1.02" (26mm) voice coil
Frequency Response: 80Hz – 15kHz ±4dB
Power Rating: 20 Watts RMS as per EIA standard RS-426-A
Pressure Sensitivity: 94dB, 1W/1m
Maximum Output: 106dB @ 1 meter
System Impedance: 8 ohms nominal; 5.5 ohms minimum
Transformer Primary Voltage: 70.7 Volts
Transformer Primary Taps: 0.5, 1, 2, 4, 8, 16 Watts; 8 ohm bypass
Dimensions (Dia x D): 13" x 2-3/8" (330mm x 60mm)
Product Weight: 4.2 lbs. (1.9kg) each
Shipping Weight: 6 lbs. (2.73kg) pair
Warranty:
Sound Advance warrantees the CT10 to be free of any defect in material of
workmanship for a period of 5 years from the date of purchase. During the
warranty period, Sound Advance will repair or replace (at its option) all
such defects without charge for parts or labor, if returned prepaid to the
proper Sound Advance service facility, together with the original sales
receipt or other proof of purchase. The unit will be returned prepaid.
Installation Example:
©2007 Sound Advance. All Rights Reserved. Sound Advance and Planar Diaphragm Technology are trademarks or registered trademarks of Dana Innovations. Specifications subject to change without notice.
For the latest Sound Advance product information please go to www.soundadvance.com.
The Sound Advance®CT10 is a unique, extended bandwidth, wide-dispersion planar loudspeaker designed for use in
commercial installations. Concealed mounting hardware results in a more discreet appearance than conventonal speakers.
Patented Planar Diaphragm Technology™ allows a CT10 that has been properly installed in a ceiling boundary to radiate
sound in a 140° hemispherical pattern with smooth, even coverage. This dispersion characteristic allows CT10 speakers to
be spaced farther apart than narrow-dispersion conventional speakers, reducing the total quantity of loudspeakers required in
almost any installation. The CT10 is generally mounted into wood or metal stud ceilings or suspended ceiling tile systems, and
will retrofit into almost all existing standard 10" diameter speaker openings. Mounting is by torsion springs, and optional tile
bridge and backcan mounting accessories are available. An optional enclosure compensation module is also available, to
restore bass performance when the CT10 is installed in a backcan. The flat Expanded PolyStyrene [EPS] loudspeaker surface
may be finished with water soluble materials such as latex paints to match almost any decor or color requirement using
conventional brush-on, roller or airless spray application systems. The CT10 is transformer-coupled, with the following taps:
0.5W, 1W, 2W, 4W, 8W, 16W, and 8-ohm bypass.
