Sound Advance CT10 User manual

CT10
Wide-Dispersion Speaker for 8” Installations
Recommended Installations:
• Suspended ceilings
• Wood or metal stud ceilings
• Soffits
• Retrofit into almost all standard 8” speaker
openings
Recommended Environment:
• Indoor or weather-protected outdoor
Recommended Accessories:
• PBB8-10 Backcan
• UMB8-10 Universal mounting bracket
• ECS8-10 Enclosure compensation module
Installation Example: HIGH QUALITY, WIDE DISPERSION
LOUDSPEAKER
The Sound Advance®CT10 is a unique, extended bandwidth, wide-dispersion
planar loudspeaker designed for use in commercial installations. Concealed mount-
ing hardware results in a more discreet appearance than conventonal speakers.
Patented Planar Diaphragm Technology™ allows a CT10 that has been properly
installed in a ceiling boundary to radiate sound in a 140° hemispherical
pattern with smooth, even coverage. This dispersion characteristic allows CT10
speakers to be spaced farther apart than narrow-dispersion conventional speakers,
reducing the total quantity of loudspeakers required in almost any installation.
The CT10 is generally mounted into wood or metal stud ceilings or suspended
ceiling tile systems, and will retrofit into almost all existing standard 8” diameter
speaker openings. Mounting is by torsion springs, and optional tile bridge and
backcan mounting accessories are available. An optional enclosure compensation
module is also available, to restore bass performance when the CT10 is installed in
a backcan.
The flat Expanded Polystyrene®[EPS] loudspeaker surface may be finished with
water soluble materials such as latex paints to match almost any decor or color
requirement using conventional brush-on, roller or airless spray application
systems.
The CT10 is transformer-coupled, with the following taps: 0.5W, 1W, 2W, 4W, 8W,
16W, and 8-ohm bypass.
Warranty:
Sound Advance®warrantees the CT10 to be free of any defect in material of work-
manship for a period of 5 years from the date of purchase. During the warranty
period, Sound Advance will repair or replace (at its option) all such defects without
charge for parts or labor, if returned prepaid to the proper Sound Advance service
facility, together with the original sales receipt or other proof of purchase. The unit
will be returned prepaid.
CT10
Speaker
UMB8-10
Universal
Mounting
Bracket
PBB8-10
Backcan
(w/hang
straps)

Performance Specifications:
Radiating Surface: 125 in2(806.5cm2) Planar Diaphragm (fits
standard 8” diameter speaker openings)
Driver System: 0.82 lb (0.37 kg) Magnet with 1.02” (26mm)
voice coil
Frequency Response: 80Hz – 15kHz ±4dB
Power Rating: 20 Watts RMS as per EIA Standard RS-426-A
Pressure Sensitivity: 94dB, 1W/1m
Maximum Output: 106dB @ 1 meter
System Impedance: 8 ohms nominal; 5.5 ohms minimum
Transformer: Primary Voltage — 70.7 Volts
Primary Taps — 0.5, 1, 2, 4, 8, 16 Watts;
8 ohm bypass
Dimensions (Dia x D): 13” x 23/8” (330mm x 60mm)
Product Weight: 4.3 lbs. (1.9kg) each
Shipping Weight: 6 lbs. (2.73kg) each
212 Avenida Fabricante
San Clemente, CA 92672
[phone] • [phone]
FAX: [phone]
www.soundadvance.com
Architects and Engineers Specification:
The loudspeaker shall be a full-range device, producing frequencies from 80Hz
to 15kHz in both horizontal and vertical planes. Total radiating surface shall
be 125 in2(806.5cm2). The high-frequency dispersion shall be at least 140° up
to 15kHz in both horizontal and vertical planes. The loudspeaker shall have a
sensitivity of 94dB (1W/1m) with a power rating of 20 watts RMS according to
EIA standard RS-426-A.
The loudspeaker shall have an exterior frame constructed of stamped steel,
with a powder-coated white enamel finish, measuring 13” (330mm) in diame-
ter and a total unit depth of 23/8” (60mm) - not including backcan. Torsion
spring mounting facilities shall be concealed from view of the installed speaker.
The complete unit shall weigh no more than 4.3 lbs. (1.9kg).
The loudspeaker shall be the Sound Advance CT10 or equivalent.
Polar Response:
Optional accessories:
PBB8-10: Backcan for ducted air return ceilings
12¼” Dia x 4¼” D (311mm x 106mm);
10¼” Cutout Dia (260mm)
1.7 lb (0.7kg)
UMB8-10: Universal mounting bracket for solid or suspended ceilings
2.7 lb (1.23kg)
ECS8-10: Line-level enclosure compensation module for installations
using the PBB8-10 backcan
CT10
Wide-Dispersion Speaker for 8” Installations
©2006 Sound Advance. All Rights Reserved. Sound Advance and Planar Diaphragm Technology are trademarks or registered trademarks of Dana Innovations.
Specifications subject to change without notice. For the latest Sound Advance product information please go to
www.soundadvance.com 05/06
500Hz
300°
330°
0°
30°
60°
270°
50dB40dB30dB
20dB
10dB
0dB
90°
50dB 40dB 30dB 20dB 10dB 0dB
1kHz
300°
330°
0°
30°
60°
270°
50dB40dB30dB
20dB
10dB
0dB
90°
50dB 40dB 30dB 20dB 10dB 0dB
2kHz
300°
330°
0°
30°
60°
270°
50dB40dB30dB
20dB
10dB
0dB
90°
50dB 40dB 30dB 20dB 10dB 0dB
500Hz 1kHz
2kHz
4kHz
300°
330°
0°
30°
60°
270°
50dB40dB30dB
20dB
10dB
0dB
90°
50dB 40dB 30dB 20dB 10dB 0dB
8kHz
300°
330°
0°
30°
60°
270°
50dB40dB30dB
20dB
10dB
0dB
90°
50dB 40dB 30dB 20dB 10dB 0dB
16kHz
300°
330°
0°
30°
60°
270°
50dB40dB30dB
20dB
10dB
0dB
90°
50dB 40dB 30dB 20dB 10dB 0dB
4kHz
8kHz 16kHz
On-Axis Frequency Response:
20 50 100Hz 2500200 5 10 20kHz1kHz
0
10
20
30
40
50 25
dB dB
50
40
30
20
10
0
Measured in an Infinite Baffle Enclosure