Sound LAB A012A User manual
A012A
Pillow Speaker
Place the A012A beneath a pillow, and plug the 3.5 mm jack to the
earphone output of a transistor radio. Ensure that the cable is
routed safely. The A012A can also be used with cassette, CD or
MP3 players or mobile telephones with stereo outputs, but the
sound will only be monophonic.
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household
waste.
Most local authorities have specific collection system for
appliances and disposal is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance
your retailer may take the old appliance for disposal.
TECHNICAL SPECIFICATION
Dimensions: 86×86×25 mm
Lead length: 1.8 m
Weight: 0.1 kg
Impedance: 8
W
Page 1
SERVICE WARRANTY
Electrovision guarantees the product free from defects in materials
and workmanship for a period of twelve months.
Should this appliance be operated under conditions other than
those recommended, or any attempts made to service or modify
the appliance, then the warranty will be rendered void.
The product you buy may sometimes differ slightly from
illustrations. This warranty is in addition to, and does not affect,
your statutory rights.
If you have any problems with this product, please call our Help
Desk on (0845) 459 4816.
Electrovision Ltd.,
Lancots Lane, Sutton,
St. Helens, Merseyside.
WA9 3EX
website: www.electrovision.co.uk
Page 2
Table of contents
