Vivo SPK-V01 User manual

Smart Touch Lamp Speaker
Packing list
User Manual
USB Cable
Specifications
Product Name: Smart touch lamp speaker
Model No.: SPK-V01
Power Input: Micro USB,DC5V 1000mA
Battery Capacity: 3.7V/2000mA
Charging Time: 2.5-4hours
Speaker Specification: 2.5Inch,4ohm/5W
Frequency Response: 70Hz-20KHz
Distortion: ≤0.5%
Signal to Noise Ratio: ≥65db
Material: ABS/Silica-gel
Music Playing Time: 15 hours at volume level 15.
Lighting Time: 15 hours at the lowest brightness.
Button Functions
Smart touch lamp speaker is a product which integrates a touch sensitive lamp and
Bluetooth speaker. The touchable lamp can be easily switched on/off and adjusted to
different brightness levels by a hand touch at the top-center of the product. The Bluetooth
speaker is a smart device which combines audio player (Bluetooth mode, SD mode, Line In
mode), FM player, and clock functions. Please check the detailed operations of each
function in the Specifications. For operation, please refer to the Operating Instructions.
Introduction 2
3
4
5
6
Button/Indicator List
1
8910
11
7
12
13 14 15 16 17
Power Switch: Used to cut off power supply for safety purposes in delivery.
The product will not get power when this switch is off.
Alarm Set: Enter alarm set mode.
Sleep Indicator: It will light when sleep mode is turned on.
Sleep: Turn on/off automatic sleep mode.
Alarm On: Turn on/off the alarm.
Clock Set: Enter clock set mode.
Charging Port: Micro USB port for power input.
Charging Indicator: To show if battery's charging
TF Port: Port to insert TF card.
Line In: 3.5mm port to connect line in signal.
Micro Phone: Micro phone for hand free call in bluetooth mode.
LED Display
Mode: Switch speaker to different modes (bluetooth, TF, line in, FM tuner).
: Play back/volume down/number down.
: Play forward/volume up/number up.
: Play/pause/answer phone
ON/OFF: Switch to active/sleep mode.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
User Manual
3.5mm Audio Cable
BT
SD
FM
Speaker
SPK-V01
Song Length
TF Card Mode
Note: LED display will be off after 5min
if no touch to the product.

TF Card Music Mode
Insert a TF card with music, and press Mode to enter the ”TF Card Music Mode”.
The speaker will automatically play music in order of the stored date.
Touch Lamp
Touch the center of the top speaker grill, the lamp will switch to 3 different lighting levels
after each touch.
ON/OFF
Slide ON/OFF switch the speaker into Active or Sleep mode. In
Active mode, all functions are available. In Sleep mode, only the alarm/clock
is running and power consumption is at its lowest for extended battery life.
to
17
Automatic Sleep Mode
Press the 4 sleep button to choose 10min,20min, or 30min countdown. When time is
set, countdown will start after 3 seconds and turn on blue indicator .
Clock Setting
To enter Clock Setting mode, hold the Clock Set button until the hour number
begins flashing. Press to switch hours or minutes.
Press to set displayed numbers. press Clock Set to
set and quit clock setting.
6
15 14
16
6
Alarm Setting
To enter Alarm Setting Mode, hold the
begins flashing. Press to switch hours or minutes.
Press to set displayed numbers. Press Alarm Set to
set and quit alarm setting.
Alarm On button is to simply turn on and off the alarm.
Alarm Set button until the hour number
2
16
15 14 2
5
Line In Mode
Press Mode button to enter the “Line In Mode”. Connect the speaker to an audio source
with the 3.5mm connector.
Volume Up: Hold
Volume Down: Hold
15
14
Bluetooth Mode
Press Mode to enter Bluetooth mode. The speaker will be ready for pairing, and the
screen will display “blue”. Open the Bluetooth setting on your Bluetooth device and search for
the speaker. Select “Lamp Speaker” to connect, and the speaker will say “ Bluetooth is
connected” when connection succeeds.
13
Power On and Charging
1Speaker Mode Selection
Press Mode to switch the speaker to different modes:
Bluetooth mode, TF card music mode, line in mode, FM tuner mode, standby mode.
If there is no TF card inserted in the TF port, the mode cycle will skip TF card music mode.
13
Bluetooth Hand Free Call
In bluetooth mode, the speaker will read the calling number when a call is coming in.
Press to pick up a hand free call. Please speak closer to the micro phone to get
better voice quality.
16
FM Tuner Mode
Press Mode button to enter the FM Tuner Mode, and connect USB cable to power port as
FM radio antenna. Press the speaker will automatically search and store available
FM radio channels. Press and to switch and play the saved channels.
The speaker can save up to 99 channels.
,
16
14
13
USB data cable
as the FM antenna
Operational Instructions
When the same bluetooth device is used again, the speaker will connect automatically.
A new Bluetooth connection cannot be made if the last connection is not cut off.
If the Bluetooth device cannot be paired successfully, please remove the “Lamp speaker”
in your device and reboot the speaker by turning off and back on using the Power switch.
name
Note:
1
(1)
(2)
Volume Up: Hold
Volume Down: Hold
Previous Song: Press
Next Song : Press
Play/Pause: Press
15
14
14
16
15
Note: Don't slide ON/OFF too quickly, wait at least 2s after each slide.
Low Battery Alarm
If the battery power is too low, the speaker will beep twice and automatically go into
sleep mode. Please slide the ON/OFF switch to OFF and charge the product. When
charged, the product can be switched back on.
3
15
8
Caution: Turn on power switch before first use by pressing with a pin.
This is the switch for the power supply, and it is normally tumed off for safety
measures during delivery. The product will not work if the switch is off.
Charge the speaker with the provided USB cable which is compatible with any cell
phone charger.( Note: the output voltage is 5V, and output current should be 1000mA
and above).
The charging indicator is red while charging and goes off when the speaker is
fully charged.
Volume Up: Hold
Volume Down: Hold
Previous Song: Press
Next Song : Press
Play/Pause: Press
15
14
14
16
15