SoundLogic XT ANC-BS813 User manual

1
POP-TOP
Collapsible Bluetooth LED Speaker
with COLOR CHANGING LED LIGHTS
ITEM NO: ANC-BS813, CBLS-6/1756
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE USE

2
Getting Started
Remove the speaker from the box.
Please retain all packaging until you have checked and counted all the parts and the contents
against the parts list.
Package Contents
Collapsible Bluetooth LED Speaker
USB rechargeable cable
Auxiliary cable
Instruction Manual
Key Features
Collapsible Bluetooth LED Speaker
Built-in Bluetooth - connect & stream wireless music anytime, anywhere
Color changing LED lights
Great for any occasion or everyday use
Multi-function mode: Bluetooth, Micr0-SD card, USB slot & Aux jack
Built-in rechargeable battery
USB recharge cable included
SAFETY INSTRUCTIONS
Keep the speaker away from heat sources, direct sunlight, humidity, water and any other liquids.
Do not operate the speaker if it has been exposed to water, moisture or any other liquids to
prevent against electric shock, explosion and/or injury to yourself and damage to the speaker.
Do not use the speaker if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician. Improper
repairs may place the user at serious risk.
Do not use the speaker with wet hands.
Do not put objects into any of the openings.
Keep the speaker free from dust, lint etc.
Do not use this speaker for anything other than its intended use.
Keep the speaker out of reach of children.
This appliance is not a toy.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such
as sunshine, fire or the like.

3
Description of Parts
1
Next Track/Volume Increase Button
2
Built-in Microphone
3
LED Light Button
4
ON/OFF/Phone Button
5
Play/Pause/Mode Button
6
LED Indicator
7
Previous Track/Volume Decrease Button
8
Micro SD (TF) Card Slot
9
Charging Indicator
10
Charging Port
11
USB (Flash Drive) Slot
12
Auxiliary Port
Note: Micro SD Card & USB Flash Drive NOT included.
INSTRUCTIONS FOR USE
Charging the speaker
The speaker has built-in rechargeable battery. When the battery is drained out, speaker would turn OFF
automatically. Please recharge the battery every time it drains out.

4
Plug the Micro USB end of the included USB rechargeable cable into the charging port. Plug the other
end into a USB port on your computer or other devices made for USB charging. Red LED Light illuminates
indicating that the device is being charged.
It takes 3-4 hours to fully charge the speaker. Once the speaker is fully charged, LED Light would turn
OFF.
Turning ON/OFF the Speaker –
Before Turning ON the speaker, please ensure that it is fully charged.
Press and hold the ON/OFF button for 3-4 seconds to turn on the unit, or 2-3 seconds to turn off.
Connect using Bluetooth Technology
Press and hold the ON/OFF button for 3-4 seconds to turn on the unit. An indication tone would
be heard and blue LED indicator flashes rapidly, indicating that you are now in Bluetooth Pairing
Mode.
Activate the Bluetooth function on your source device (Mobile Phone or Tablet). Please refer to
manufacturer’s instructions for instructions on enabling Bluetooth on your device.
Search for available Bluetooth devices and you would find “SL POP-TOP” –Pair it with this
device.
If required, enter the password “0000” to pair with the device.
Once paired successfully, you would hear another indication tone, and blue LED flashes very
slowly.
You can now stream wireless music on your speaker through your source device.
Answering Calls through Bluetooth Speaker
Please ensure that you are paired with the Bluetooth Speaker to use the below functions.
Function
Operation
Button
Answer Incoming
Call
Incoming Call
Press the Phone button once to answer an incoming call.
Reject incoming call
Incoming Call
Short press the Phone button twice
End Call
Incoming Call
After your phone conversation, short press the Phone button
Increase Volume
During a call
Press and hold the Volume increase button to increase the
volume
Decrease Volume
During a call
Press and hold the Volume decrease button to decrease the
volume
Redial last number
Standby mode
and connected
to a device
Short press the Phone button twice
Listening to Music Wirelessly
Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the Bluetooth
Speaker to stream music wirelessly. Once it is paired, play music from your device.
Function
Operation
Button

5
Increase Volume
Playing music
Press and hold the Volume increase button to increase the
volume
Decrease Volume
Playing music
Press and hold the Volume decrease button to decrease the
volume
Pause
Playing music
Short press the Play/Pause button will pause the music
Play
Pausing
Short press the Play/Pause button will resume the music
Previous track
Playing music
Short press the Previous track button will return you to the
previous track
Next track
Playing music
Short press the Next track button will take you to the next track
(Note: An indication tone will alert you when the volume is adjusted to the maximum level. In Aux
mode, besides the volume increase/decrease, you will need to control through your source device.)
Stream music from Micro SD (TF) Card or USB Flash Drive –
Turn ON the speaker.
Insert the Micro SD (TF) Card or USB Drive preloaded with songs, into the Micro SD (TF) Card
Slot or USB Card Slot of the speaker respectively. An indication tone would be heard and
speaker would automatically start playing songs from the Micro SD (TF) Card or USB Drive.
To Skip Track Forward –Short press the Next track button.
To Skip Track Backwards –Short press the Previous track button.
To Pause the Track –Short press the Play/Pause button.
To Play the Track –Short press the Play/Pause button.
Long press Volume increase button to increase the volume or Volume decrease button to
decrease the volume.
Note: Micro SD Card & USB Flash Drive NOT included.
Listening to FM radio
Turn ON the speaker.
Insert the Aux cable (included) into the auxiliary port. Leave the other end of the cord open. The
Aux cable serves as FM Antenna while in FM Radio mode.
Press and hold the Mode button for 2 seconds each time until it reaches FM radio mode, with
sound coming from a FM radio station.
To AUTO-SCAN the stations, short press the Play/Pause button once.
It will take few minutes to search all the stations. Once all the stations are scanned, they get
registered in memory, automatically.
Press Next track or Previous track button to skip selected stations.
Long press Volume increase button to increase the volume or Volume decrease button to
decrease the volume.
Play music through “Auxiliary” mode
Turn ON the speaker.
Insert one end of the Auxiliary cable (included) into the Auxiliary port, and an indication tone
would be heard. Insert the other end to the audio device (such as phone / MP3 Player /
computer / tablet / …..etc.).
Press and hold the Mode button for 2 seconds changing to Aux mode with an indication tone.

6
Select your favourite song at the source device to play.
Long press Volume increase button to increase the volume or Volume decrease button to
decrease the volume.
Note: Play, Pause, Skip Forward, Skip Backward etc can only be controlled through the source devices,
while playing music in Auxiliary mode.
Tips!!
1. Short press the “Mode button” to switch different functions of the speaker between – Bluetooth
/ AUX-In / USB-Micro SD (TF) / FM radio.
2. When the speaker is not in use, turn it OFF in order to save the battery power.
LED Light
1. Turn on the speaker.
2. Short press the LED Light Button each time to change the LED Light color pattern:
White -> Bright white -> Green -> Red -> Blue -> Color changing -> Color changing and slow
flashing -> Color changing and moderate flashing -> Color changing and rapid flashing -> off
Specifications –
Bluetooth version: 5.0
Unit size: Dia. 2.8”x7.1” H
Unit weight (each speaker): ~13.3 oz
Power input: DC 5V
Charging time: 3-4 hours
Play time: 2-3 hours (maximum volume)
Bluetooth range: 33 feet
FM frequency range: 87.5-108MHz
Built-In Rechargeable Battery (each speaker): 3.7V 1200mAh
Micro SD (TF) Card/USB Drive: Support up to 32GB
(Note: Battery life & charging time may vary based on usage, types of devices connected & wireless
distance.)
Troubleshooting
Problem
Possible Cause
Solution
Low sound level
Source (Tablet, Mobile Phone, Laptop,
etc.) volume too low.
Battery dead
Adjust source volume.
Charge Battery.
Sound distorted
Battery nearly dead
Charge Battery.
No sound at all.
Source (Tablet, Mobile Phone,
Laptop.) turned off.
Speaker turned off.
Volume turned down source.
Media paused on source.
Turn the source on.
Turn the speaker on.
Adjust volume source.
Play media from source.

7
Care and maintenance
Read the following recommendations before using the Bluetooth Speaker. Following these you will be
able to enjoy the product for many years.
Do not expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being
affected.
Don’t use abrasive cleaning solvents to clean the unit.
Do not expose the unit to extremely high or low temperature as this will shorten the life of
electronic devices, destroy the battery or distort certain plastic parts.
Don’t dispose of the unit in fire as it will result in an explosion.
Don’t expose the unit to contact with sharp objects as this will cause scratches and damage.
Don’t let the unit fall down onto the floor. The internal circuit might get damaged.
Don’t attempt to disassemble the unit as it may get damaged if you are not professional.
FCC Instructions
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the product.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This product generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If the product does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the product and receiver.
-Connect the product into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Limited Warranty
This manufacturer's product warranty extends to the original consumer purchaser of theproduct. Neitherthe
retailer norany othercompany involvedinthesaleorpromotionof this product is a co-warrantor of this
manufacturerwarranty.
WARRANTY DURATION: All materials and workmanship are warranted to the original consumer purchaser
for a period of ninety (90) days from the original purchase date.
WARRANTY COVERAGE: This product is warrantedagainst defectivematerialsor workmanship. This warranty
is void if the product has been damaged by accident, in shipment, unreasonable use, misuse, neglect,
improper service, commercial use, repairs by unauthorized personnel or other causes not arising out of

8
defects in materials or workmanship. This warranty is effective only if the product is purchased and
operated in USA and does not extend to any unitswhich have been used in violationofwritten instructions
furnishedby manufacturer or to units which have been altered or modifiedor, to damaged products or parts
thereof which have had the serial number removed, altered, defaced or rendered illegible.
WARRANTY DISCLAIMERS: Thiswarrantyisinlieuofallwarrantiesexpressedorimplied and no representative or
personis authorized to assumefor manufacturer any other liability in connection with the sale of our products.
There shall be no claims fordefects or failure under any theory of tort, contractor commercial law including but
not limited to, negligence, gross negligence, strict liability, breach of warranty and breach of contract. Under no
circumstances will Manufacturer’s / Distributor’s maximum liability exceed the retail value of the product.
WARRANTY PERFORMANCE: Duringtheabove90-daywarrantyperiod,aproduct with a defect will be either
repaired or replaced with a reconditioned comparable model (at manufacturer's option). The repaired or
replacement product will be in warranty for the balance of the 90-day warranty period and an additional
one-month period. No charge will be applicable for such repair or replacement.
SERVICE AND REPAIR: Ifservice isrequired forthis product,youshouldfirst contactMidwest Trading Group
Customer Service at info@mtradinggroup.com or by calling1 (866) 815-4714, Monday to Friday 10am to 6pm
EST.
NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment. As a
precautionary measure, carefully package the product for shipment, and insure it with the carrier. Be sure to
enclose the following details with the product: your full name, return address and daytime phone number, a
note describing the problem you experienced, a copy of your sales receipt or other proof of purchase to
determine warranty status.C.O.D. shipments cannot be accepted.
This manual suits for next models
3
Table of contents
Other SoundLogic XT Speakers manuals