thomann Pyrit 10A User manual

Pyrit 10A, 12A, 15A
active 2-way full-
range speaker
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
05.07.2019, ID: 299659, 299658, 299657 (V2)

Table of contents
1 General notes............................................................................................................................................... 4
2 Safety instructions..................................................................................................................................... 7
3 Features....................................................................................................................................................... 12
4 Installation.................................................................................................................................................. 13
4.1 Tips on handling speakers............................................................................................................ 15
4.2 Hanging the speaker box.............................................................................................................. 16
4.3 Pin assignment.................................................................................................................................. 16
5 Connections and operating elements........................................................................................... 20
6 Technical specications....................................................................................................................... 26
7 Protecting the environment.............................................................................................................. 28
Table of contents
Pyrit 10A, 12A, 15A
3

1 General notes
This user manual contains important information on safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to other users, be sure
that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
General notes
active 2-way full-range speaker
4

This section provides an overview of the symbols and signal words used in this user manual.
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Symbols and signal words
General notes
Pyrit 10A, 12A, 15A
5

Warning signs Type of danger
Warning – high-voltage.
Warning – suspended load.
Warning – danger zone.
General notes
active 2-way full-range speaker
6

2 Safety instructions
This device is designed for sound reinforcement. Use the device only as described in this user
manual. Any other use or use under other operating conditions is considered to be improper
and may result in personal injury or property damage. No liability will be assumed for damages
resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
Pyrit 10A, 12A, 15A
7

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or re. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
active 2-way full-range speaker
8

CAUTION!
Possible hearing damage
The device can produce volume levels that may cause temporary or permanent
hearing impairment. Over an extended period of time, even levels that seem to
be uncritical can cause hearing damage.
Decrease the volume level immediately if you experience ringing in your ears or
hearing impairment. If this is not possible, keep a greater distance or use su‐
cient ear protectors.
CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the device, at least two persons are required for trans‐
port and installation.
Safety instructions
Pyrit 10A, 12A, 15A
9

NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire
hazard!
Only fuses of the same type may be used.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
active 2-way full-range speaker
10

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
Safety instructions
Pyrit 10A, 12A, 15A
11

3 Features
The device is particularly suitable for use in churches, conference rooms and multi-purpose
halls.
Special features of the device:
nItem no. 299659: 10-inch woofer, 1.4-inch tweeter
Item no. 299658: 12-inch woofer, 1.7-inch tweeter
Item no. 299657: 15-inch woofer, 1.7-inch tweeter
nClass D amplier for LF
Class AB amplier for HF
nBuilt-in sound processor (DSP) with 3 modes (Music, Flat, Low Cut)
nConnection options: XLR / 1/4" jack combo socket for signal input, XLR panel plug for
signal output
nItem no. 299659: M6 rigging points
Item no. 299658 and 299657: M8 rigging points
nBuilt-in feet for monitor applications
nDouble pole mounting ange (vertical and 5° inclination)
nCeiling mountable (with optional mounting bracket)
nPowder-coated front grille
Features
active 2-way full-range speaker
12

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
You can install the device standing or hanging. When in use, the device must be mounted at a
solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you perform
any kind of maintenance. Block access under the work area.
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Installation
Pyrit 10A, 12A, 15A
13

WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the device, at least two persons are required for trans‐
port and installation.
NOTICE!
Possible property damage by magnetic elds
Loudspeakers produce a static magnetic eld. Therefore, maintain an appropriate
distance to devices that can be adversely aected or damaged by an external
magnetic eld.
Installation
active 2-way full-range speaker
14

NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
4.1 Tips on handling speakers
We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐
ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound
will be evenly spread with maximum range throughout the audience area.
Always use high grade cable to connect your equipment. Otherwise you won't reach max‐
imum sound quality.
If you notice distortion during operation, the active speaker is overloaded. This may perma‐
nently damage the device. Always reduce the volume as soon as you hear distortion.
Installation
Pyrit 10A, 12A, 15A
15

4.2 Hanging the speaker box
To hang the speaker box on special mounting devices (aka ‘ying’), top, bottom and sides of
the box have M6 threads (item no. 299659) or M8 threads (item no. 299657 and 299658). Safety
eyes can be screwed into these threads. Check the secure connection of the safety eyelets with
the box carefully, before you use it in ‘ying mode’.
4.3 Pin assignment
You may use XLR and jack connectors with either balanced or unbalanced pinout. Below you
will nd an overview of the dierent options.
Installation
active 2-way full-range speaker
16

XLR panel sockets are provided for signal inputs. XLR panel plugs are provided for signal out‐
puts. The gure and the table show the XLR pin assignment.
Balanced pinout:
1 Ground
2 Positive signal (+)
3 Negative signal (–)
Unbalanced pinout:
1 Ground
2 Signal
3 Jumpered with pin 1
XLR connections for signal
inputs/outputs
Installation
Pyrit 10A, 12A, 15A
17

The gure and the table show the pin assignment for ¼-inch jack plugs.
Unbalanced wiring (jack plug, mono):
1 Signal
2 Ground
Unbalanced wiring (jack plug, stereo):
1 Signal
2, 3 Ground
Jack plug for signal in and out‐
puts
Installation
active 2-way full-range speaker
18

Balanced wiring (jack plug, stereo):
1 (tip) Positive signal (+)
2 (ring) Negative signal (–)
3 (sleeve) Ground
Installation
Pyrit 10A, 12A, 15A
19

5 Connections and operating elements
Rear panel Pyrit 10A
Connections and operating elements
active 2-way full-range speaker
20