SOYO Atlas DYLT3212 User manual

CONTENT
SAFETY & PRECAUTIONS...............................
ACCESSORIES.........................................
TO CUSTOMERS........................................
OPERATION SAFETY.....................................
CONTENTS
PRODUCT INSTALLATION................................
1.Antenna Installation.........................
2.VGA Source Connection.........................
3.
4.High Definition TV (HDTV).....................
REMOTE CONTROL.....................................
REMOTE CONTROL PRECAUTION & USAGE...................
POWER ON/OFF......................................
1.Channel Selection...........................
2.Direct Channel Selection....................
3.Antenna /Cable TV Setup......................
4.Auto Scan..................................
TV/AUDIO/PC SELECTION..............................
AUDIO SETTINGS.....................................
PC (RGB) MODE.......................................
BASIC OPERATION....................................
FEATURES............................................
SOURCE INPUT CONNECTORS............................
PICTURE PARAMETERS...............................
PRODUCT SPECIFICATIONS..............................
MULTI-MEDIA BOX.....................................
DVI Source Connection.........................
5.Speaker Jack(Audio Out).......................
6.Power Connection..............................
PC PARAMETERS...................................
AUDIO SETTINGS.....................................
PICTURE-IN-PICTURE..............................
CHANNEL SETTINGS...................................
PARENTAL CONTROLS..................................
GENERAL SETTINGS................................
FUNCTIONS...........................................
2
7
8
10
11
13
13
14
16
17
17
9
10
1
2~5
11
11
15
17
17
18
10
11
11
24
28
29
6
19~21
22~24
25~27
29~33
12

Caution：To avoid fire and electric
shocks, do not expose this
product under damp or humid
condition and make sure the
plug is fully plugged in at all time.
Warning:Never open the housing of the LCD
display. When the housing is opened,
there is a danger of injury from
electric shock.There is no
component that can be replaced by
users. Please contact the service
personnels and replace with
manufacturer appointed components.
Disposal: Due to the environmental concerns,
please refer to your local
authorized organization or
electronics industry society before
you dispose this product. Please
visit http:// www.eia.org for more
Information.
OPERATION SAFETY
1

Thank you for purchasing this product. Please
read through the instructions and follow the steps
in order to achieve the maximum reliability.
Please keep this manual handy and close to your
LCD display after reading.
◎Manual Guide--Please read through user's
manual before operating this
product.
◎Instructions--Please follow and be aware
of cautions and warnings.
◎Follow Steps--Please follow the operation
procedures.
◎Socket Outlet--Please use standard socket
outlet to avoid damages to
the LCD display.
◎Power Source--This product has to operate with
correct power source shown on
label.
◎Power Cord Protection--Avoid tangling or
placing objects on the power cord.
◎Over-loading--Avoid AC power over-loading,
which may lead to fire or electric
shock.
TO CUSTOMERS
SAFETY & PRECAUTIONS
2

◎D o n o t i n s e r t a n y o b j e c t s t h r o u g h t h e s l o t s a n d
o p e n i n g s o f t h e L C D d i s p l a y . T h i s m a y l e a d t o
a n e l e c t r i c a l s h o r t - c i r c u i t o r e v e n c a u s e
f i r e a n d r e s u l t s i n d a m a g e s t o y o u r L C D
display
◎R e p a i r - - P l e a s e u n p l u g t h e p o w e r c o r d a n d c o n t a c t
d i s t r i b u t o r s o r q u a l i f i e d r e p a i r
p e r s o n n e l s i f a n y o f t h e f o l l o w i n g
s i t u a t i o n s h a v e h a p p e n e d .
1 . P o w e r c o r d i s d a m a g e d
2 . O b j e c t s h a v e b e e n i n s e r t e d t h r o u g h t h e
s l o t s a n d o p e n i n g s o f t h e d i s p l a y .
3 . P r o d u c t i s u n d e r h u m i d c o n d i t i o n o r
li q u i d l e a k a g e s o n t o t h e d i s p l a y .
4 . P r o d u c t c a n n o t f u n c t i o n n o r m a l l y , o r
cannot operate.
5.Product was dropped or damaged.
Note：When using AV signals (e.g DVD, VCR..), Please
check the input source if the screen appears
glittering or having bad signals.
For example, cables are correctly connected and DVD
player output setting is the same as TV resolution
setting. (Resolution is under 480i or 576i etc.)
◎P a r t s R e p l a c e m e n t - - I f a n y p a r t s n e e d t o b e
R e p l a c e d , p l e a s e c o n t a c t t h e s e r v i c e p e r s o n n e l .
3

◎W a l l M o u n t i n g - - P l e a s e u s e c o r r e c t w a l l m o u n t a n d
f o l l o w i n s t r u c t i o n s w h e n i n s t a l l i n g
t h e d i s p l a y o n t o t h e w a l l .
◎C l e a n i n g - - U n p l u g p o w e r c o r d b e f o r e h a n d . P l e a s e u s e
d r y a n d s o f t s p o n g e t o c l e a n t h e s c r e e n
s u r f a c e . D o n o t u s e d i l u t e d a c i d .
◎H u m i d i t y - - K e e p t h i s p r o d u c t a w a y f r o m m o i s t u r e o r
h i g h h u m i d i t y a r e a .
◎Placement--Place this product on a stable and
vibration free surface in order to avoid
the LCD display from falling.
◎Ventilation--Please never cover or block openings and
slots of the display.This may cause the
display to over-heat and reduce it's life
time.Please allow some space for
ventilation.
4

◎Away from heat sources--Keep this product away from heat
sources such as direct exposure to sunlight, heater and
stove,etc.This would avoid structure distortion or
machine break down.
◎When switched off, the LCD display can be stored
comfortably between -4℉ to 140℉(-20℃ to 60℃）
◎Unplug from the socket outlet if the LCD Display is not
intended to be used for a long period of time.
5

88
88
88
ACCESSORIES
User Menu(*1) Remote Control(*1)
AAA Batteries(*2) Power Cable(*1)
6

Color Adjustment:Users are able to
adjust their custom color setup.
Auto-Adjustment:It helps users to
adjust the display into appropriate
setup.
Contrast/Brightness:Users are able to
adjust their custom setup.
Display Frequencies:Users can use this
function to check current horizontal
frequency,vertical frequency, phase
and resolution.
Position Adjustment:Users can adjust
display's vertical and horizontal
positions.
PIP setup:
(1)PIP source:Select PIP input source
(2)PIP Ver/Horz position: Allows
adjustment of PIP positions.
Menu Setting: Allows setup of OSD
language, picture position, time and
picture freeze time etc.
Source:Allows selection from PC,DVI,
S-Video1,S-Video2,AV1,AV2,YCbCr,TV/CATV,HDTV
1.
2.
3.
4.
5.
6.
7.
8.
FUNCTIONS
7

產品尺寸規格產品尺寸規格
PRODUCT SPECIFICATIONS
974 mm
688 mm
254 mm
40-inch.16:9
40
128 0x7 68
6W + 6W
600 ：1
14/ 8 ms
50, 000 hou rs
102 6mm
32-inch.16:9
136 6x7 68
551 mm
800 ：1
240 mm
AC 100-240V ,50/60 Hz
10W + 10W
766mm
545mm
240mm
987mm
240mm
27-inch.16:9 30-inch.15:9
1280x7681280x720
545mm
23-inch.16:9
1280x768
720mm
475mm
240mm
480p/480i/720p/1080i
H：170, V：170
500：1
15/10 ms
60,000 hours
NTSC/PAL
23
26 30
8W+8W
2
37
600 ：1
50, 000 hou rs
600 ：1
Mode l
Picture panel
Reso lu ti on
Dime ns io ns
(mm)
W
H
D
HDTV c om pa ti bl e
Spea ke r
AC Pow er S up pl y
View a ng le
Contrast ration(type)
Response time(Tr/Tf)
Lamp l if e
Vide o Co mp at ib le
Note: No announcement for any chan ge of design and specification.
42
1366 x 768
1024 m m
700m m
250m m
8W+8W
400：1
10/1 0 m s
42-inch.16:9
8

FEATURES
9

Make sure multi-media box has been
installed correctly.
Please connect antenna cable to
Multi-media box's tuner head〈ANT〉
(Refer to figure 1 on page 12)
Please do not install antenna in raining or
thundering condition
PRODUCT INSTALLATION 〈WITH MULTI-MEDIA BOX〉
1.Antenna Installation
Caution：Please use legal cable TV, otherwise it may
damage the product.It may also void warranty.
Au di o
VG A
Au di o In pu t
Au di o Ou tp ut
YE S
YE S
2 SE T
1 SE T
1 SE T
1 SE T
2 SE T
1 SE T
YCbCr
HDTV
TV Input
1 SE T
Supporting
Connectors
AV I/O Connect or Video1vp-p( 75)ohms
Audio0.4rm s(47Kohms)
S-Video:Brightness:1vpp(75ohms),
Color:0.3V PP(75ohms)
MTS
Surround
S-Video
AV Input
1 SE T
Co nn ec to rs
DV I
MULTI-MEDIA BOX
10

Please switch off PC and TV. Connect VGA
cable to display's D-Sub connector, and
connect the other head of cable to PC VGA
Output
You can use this display to play with a Video player,
Video
Please connect to Y.Cb.Cr (Digital signals)
if the external devices has Y.Cb.Cr outputs
Please connect to correct video and audio
jacks with external devices.
This TV provides audio output jack（Audio OUT) which
allows connection with external speakers orstereo.
Please purchase standard signal cables
Please switch off the TV before setting up
Please use correct socket
Please unplug the power cord if theTV will not be
used for along period of time.
2.VGA Source Connection:
3.DVI Source Connection:
6.Power Connection:
4.High Definition TV (HDTV)source connection:
Use DVI cable to connect with PC and TV
This TV provides one Y.Cb.Cr-VGA cable and one
audio cable.for HDTV, please connect
Y.Cb.Cr-VGA cable to Y.Cb.Cr jacks, and connect
the other head of cable to D-SUB connector.
For HDTV audio, please connect the audio cable
to PC Audio In jack at the back of the TV.
5.Speaker Jack(Audio Out):
Use for external speakers or stereo.
11

SOURCE INPUT CONNECTORS
M u l t i - m e d i a b o x
INPUT1
INPUT2
3
Connectors Description
1
2
AV . S -Video In
In p u t 1、Input 2
Vi d e o Input is using Video Jack(Y e l low RCA Jack)or S-
Vi d e o Jack. Audio Input is using Wh i t e RCA Jack (Left)
an d R e d RCA Jack (Right)
Th e l evel of audio output cannot be c h a nged using the
vo l ume, treble and bass control s o n y our display.This
co n nector should be used with an ex t e rnal audio
am p lifier that can be used to contr o l t he volume
5
ANT Receive TV Source
6
4
Audio Out
SD T V I nput
HD T V I nput
Su p port 480i. 576i. Signal
Su p port 480P. 576P.720P and 108 0 i S ignal
12

1.Press POWER button from key pad (or remote
control),the red light will turn green.This means
the TV has been switched on. The picture will takes
about 3 seconds to show on the screen.
2.Press POWER button again to switch off
the TV. Green light will turn back to red
Warning：Electrical currents may still remain
in TV after power is switched off,please
unplug the power cord if it is not intended
to be used for a long period of time.
TV/AUDIO/PC SELECTION
2.Sources display orders are PC DVI S-Video1
Av2 YCbCr TV/CATV HDTV
1.Press SOURCE button to change input source
3.After source input has been selected, press
MENU button to set up language and other
functions
Key PadKey Pad
BB
ChCh V o lVo l
CC
SourceSource MenuMenu POWERPOWER
DD
EEAA
S-Video2
C2
Refer to Pg.14 for Remote Control Description
3
B
POWER ON/OFF
13

REMOTE CONTROL
Source:
Select source input
(2)
(3)
(4)
(5)
(6)
Menu:
Select from PICTURE
PARAMETERS/AUDIO
SETTING/PICTURE IN
PICTURE/PARENTAL
CONTROLS/GENERAL
SETTINGS.Use(+)(-)to
select desired
program and press ENTER
to proceed. Use and
to select function
that need to be adjusted.
VOL:
(+)for volume up and
(-)for volume down
CH:
Use CH( ) to change
channels
Exit:
Back to previous
channel or program
(7)Enter：
Under menu mode,press this key to confirm and
proceed the program or function.In TV Mode,it
can be used to switch back to the previous channel.
(8)MTS/NICAM：
Switch to Mono,SAP.
(9)PIP：
Switch to PIP or POP.
Power(1)
55
EE
4
D
16

(10)Mute:
Switch On/Off sound off function
(11)Sleep:
Set timer to 30/60/120 min.
(12)Display:
To display the imformations at top right corner
(13)Digit Buttons:
Switch to favorite channel directly by
entering the channel numbers
(14)16:9:
Switch to 4:3 or 16:9 display format
(15)Freeze:
Freeze the display image
(16)Close Caption:
Switch On/Off sub-title function
(17)Swap:
Swap input sources between main display and
sub-display
(18)PIP Source:
To show PIP function on the screen
(19)Direct Keys:
Access to PC/DVI/TV/(AV1andAV2)/(S-Video1andS-Video2)
/Y.Pb.Pr/HDTV directly
17
REMOTE CONTROL PRECAUTION & USAGE
Remote distance will be shorter as the
signal receiver is facing a strong light.
Remove batteries from remote control if it
not in use for a long time
Remote control should point directly to
the TV signal receiver
All impacts should be avoided
Humidity and high temperature
conditions should be avoided

IMPORTANT:
1.If PC picture interferences appeared
while RGB and antenna are connecting to the
display at the same time. This is possibly caused by
PC and display both are using different number of
plugging heads,such as 2 heads and 3 heads.
Users are adviced to use the same number of plugging heads
for both PC and display.
Key PadKey Pad
BB
ChCh V o lVo l
CC
SourceSource MenuMenu PO W ERPO W ER
DD
EEAA
PC Mode Adjustment
1.Press or button to get Menu list
3
2.Use buttons to select options
3.Use Enter button from remote control
(or Source button from key pad) to
confirm selected adjustment option
4.Use or to proceed adjustment
B
( ) ( ) ( )
DisplayDisplay PC PC PCDisplay
4
D
7
C
4
D5
E
PC (RGB) MODE
18

A：By using Key Pad
B：Or Remote Control
1.Channel Selection
2.Direct Channel Selection
Select favorite channels directly by pressing
channel numbers. For example, Ch45. Press 4
and followed by 5
Press Ch or button to search channels
5
5.Press POWER button to stop auto-scan process
4.Auto Scan
E
3.Antenna/Cable TV Setup
Menu CHANNEL SETTINGS System ANTENNA/CABLE
Menu CHANNEL SETTINGS CH EDIT AUTO
Key PadKey Pad
BB
ChCh V o lVo l
CC
SourceSource MenuMenu PO W ERPO W ER
DD
EEAA
BASIC OPERATION
19

3.Press to enter Audio Settings menu.Use
Buttons to select (Bass/Treble/Balance/MTS/Mute)
1.Press Vol button,
"-"for volume down and "+"for volume up.
2.Press MENU to display the main menu.
Use Vol to select audio settings.
4.Press buttons to perform adjustment. Press MENU
Button to exit.
Balance：Sound Balance adjustment
Bass：Bass sound frequency adjustment
Treble：Treble sound frequency adjustment
5.MUTE：Press Mute button from remote control
to switch On/Off the sound
(Refer to pg.14 for Remote Control Description)
6.MTS：Press MTS button from remote control,
You are able to select fuctions of Mono,and Nicam
(Refer to pg.14 for Remote Control Description)
Note：MTS/NICAM only works in TV mode
1 0
8
Ke y P a dKe y P a d
BB
ChCh V o lVo l
CC
SourceSource MenuMenu PO W E RPO W E R
DD
EEAA
4
D
3
B
7
C5
E
4
D
3
B
4
E
AUDIO SETTINGS
20

BRIGHTNESS
BRIGHTNESS
CONTRAST
SATURATION
HUE
COLOR TEMP
50
1.Press MENU button to display the main menu
2.Press Enter button to select(PICTURE PARAMETERS)
option
3.Select BRIGHTNESS and press to perform adjustment.
FLESHTONE
SHARPNESS
CONTRAST
BIRGHTNESS
CONTRAST
SATURATION
HUE
COLOR TEMP
50
FLESHTONE
SHARPNESS
3
B
7
C
1.Press MENU button to display the main menu
2.Press Enter button to select(PICTURE PARAMETERS)
option
3.Press button to select CONTRAST and use to adjust.
3
B
7
C
5
E4
D
4
D
BL BRIGHTNESS
BL BRIGHTNESS
PICTURE PARAMETERS
21
Please refer to Page 13.14 for control buttons.