SPÜLBOY Neptun T 2000 User manual

QUICKSTARTGUIDE
CLASSICLINE
SPÜLBOY® Neptun T2000
SPÜLBOY® Twin-Go T
SPÜLBOY® Twin-Go T portable
Schäfer Produkte GmbH
Simonshöfchen 53
42327 Wuppertal/Germany
Phone: [phone]
E-Mail: [e-mail]
www.spuelboy.de
UNIQUE!
100%HYGIENIC
CLEANGLASSES

2
0
8
4
4
bar
6
bar
3/8”
1
waste water
rinsefresh
water
1connect the device
to the main water supply
(3/8” or likewise)
2regulate the water
pressure between
2 to max. 4 bar
3check the system
• fill in fresh water
• fill in Classic
SPÜLBOY®tab
• check horizontal
water flow
• ready to use
QUICKSTARTGUIDE
Howtoinstall?

rinse
fresh
water
hours
4-6
1check and keep the
cleanliness of the device
and the work environment
2fill the pre-sink
with fresh water
3place a quater of a Classic
SPÜLBOY®tablet into
the pre-washing canister
4renew the tab, if
during the rinsing (!)
no more foam forms
(after appr. 6 hours)
QUICKSTARTGUIDE
Firstcommissioning

Step 1 Step 2
1move the glass with
steady up and down
movements completely
over the brush, at least
3-4 times
don‘t twist!
2let the glass drain off
briefly over the
pre-washing canister
3push down the
2 stage valve for at least
2-3 seconds; rinse until
the glass inside and
outside is clearly cleaned
QUICKSTARTGUIDE
Howtocleanaglass?

Endoftheday:
1take off the brushes
and place them with
Classic brush sanitizer
into a bucket /sink
2fill up the sink with
warm water and wait
for appr. 12 hours
3wipe off the device
thoroughly with
a clean sponge
Inthemorning:
1rinsing brushes clean
2place the brushes
back into the device
3fill-up with fresh water
and new tab
• ready to use
12
hours
QUICKSTARTGUIDE
HowtocleanSPÜLBOY®?

Incaseofglassdamage:
fresh water
1stop the rinsing
process immediately
2take the device off
the water pressure
3let the water
drain out of the
pre-washing canister
4take off the brushes
carefully and rinse
them clean
5carefully remove
all broken glas
6place the brushes
back into the device
7check the system
QUICKSTARTGUIDE
Attention!