Spansion SK-FM3-9BF516N-TOUCHKIT User manual

Spansion International Inc.
User Guide
MCU-UG-9B0007-11
FM3 FAMILY
EVALUATION BOARD
SK-FM3-9BF516N-TOUCHKIT
USER GUIDE

SK-FM3-9BF516N-TOUCHKIT User Guide
Revision History
MCU-UG-9B0007-11 - 2 - © Spansion Inc
Revision History
Date
Issue
04-May-2011
CHa
First version
13-Jan-2015
CHa
Spansion document style
This document contains 12 pages.

SK-FM3-9BF516N-TOUCHKIT User Guide
Warranty and Disclaimer
© Spansion Inc. - 3 - MCU-UG-9B0007-11
Warranty and Disclaimer
The use of the deliverables (deliverables shall include, but not limited to, software,
application examples, hardware, target boards, evaluation boards, starter kits,
schematics, engineering samples of IC’s etc.) is subject to the terms and conditions
of Spansion LLC and its affiliates (“SPANSION”) as set out below and in (i) the terms
and conditions of the License Agreement and/or the Sale and Purchase Agreement
and/or any other agreement under which deliverables have been delivered, (ii) the
technical descriptions and (iii) all accompanying written materials.
1. Please note that the deliverables are intended for and must only be used for test
applications in an evaluation laboratory environment.
2. The software deliverables are provided on an as-is basis without charge and are
subject to alterations. It is the user’s obligation to fully test the software in its
environment and to ensure proper functionality, qualification and compliance with
component specifications.
3. Regarding hardware deliverables, the following limited warranty shall apply:
Except as otherwise provided in the following paragraphs, for a period of one (1)
year from date of shipment to customer (“Warranty Period”), SPANSION warrants
the hardware deliverables (i) are free of defects in material and workmanship,
and (ii) conform to SPANSION applicable data sheet specifications (available at
www.spansion.com or upon request).
This warranty does not extend beyond the first purchaser of the deliverables. The
liability of SPANSION under this warranty is limited, at SPANSION’s option,
solely to repair the deliverable, to send replacement deliverable, or to make an
appropriate credit adjustment or refund in an amount not to exceed the original
purchase price actually paid for the deliverable returned to SPANSION.
SPANSION’S warranty obligations are conditioned upon the following: (a)
SPANSION is promptly notified in writing by customer during the applicable
warranty period of any defect or nonconformance in the deliverable, (b) customer
obtains authorization from SPANSION to return the defective deliverable, (c) the
defective deliverable is returned to SPANSION in accordance with SPANSION’S
shipping instructions set forth below, and (d) SPANSION’S examination of such
deliverable discloses to its satisfaction that any defect or nonconformance
actually existed and was not caused by improper use or operation outside of the
data sheet specifications for the deliverable, abuse, negligence, improper
installation, accident, loss or damage in transit, or unauthorized repair or
alteration by a person other than SPANSION. Customer shall ship such defective
deliverable to SPANSION via SPANSION’S carrier, collect. Risk of loss will
transfer to SPANSION when the defective deliverable is provided to
SPANSION’S carrier. If customer fails to adhere to these warranty returns
guidelines, customer shall assume all risk of loss and shall pay for all freight to
SPANSION’S specified location. This warranty shall not apply to any deliverables
that have been repaired or altered, except those which have been repaired or
altered by SPANSION. The aforementioned provisions do not extend the original

SK-FM3-9BF516N-TOUCHKIT User Guide
Warranty and Disclaimer
MCU-UG-9B0007-11 - 4 - © Spansion Inc
warranty period of any deliverable that has either been repaired or replaced by
Seller.
THESE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, NONINFRINGEMENT, AND ANY WARRANTY
OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR
SAMPLE. SPANSION NEITHER ASSUMES NOR AUTHORIZES ANY OTHER
PERSON TO ASSUME FOR IT ANY OTHER LIABILITIES. THE FOREGOING
CONSTITUTES CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR THE
FURNISHING OF DEFECTIVE OR NONCONFORMING DELIVERABLES.
4. The following limitation of liability shall apply for all deliverables
EXCEPT FOR DAMAGES FOR BODILY INJURY OR DEATH, SPANSION
SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL,
RELIANCE, OR CONSEQUENTIAL DAMAGES, RELIANCE DAMAGES,
AND/OR PUNITIVE, OR EXEMPLARY DAMAGES, WHETHER ANY SUCH
DAMAGES ARE BASED ON CONTRACT, TORT OR ANY OTHER LEGAL
THEORY, AND WHETHER OR NOT SPANSION HAS BEEN INFORMED OF
THE POSSIBILITY OF SUCH DAMAGES, AND NOTWITHSTANDING ANY
FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
REGARDLESS OF THE BASIS ON WHICH CUSTOMER IS ENTITLED TO
CLAIM DAMAGES FROM SPANSION (INCLUDING FUNDAMENTAL BREACH,
NEGLIGENCE, MISREPRESENTATION, OR OTHER CONTRACT OR TORT
CLAIM), SPANSION ENTIRE LIABILITY IN ANY CALENDAR YEAR,
REGARDLESS OF THE NUMBER OF CLAIMS, SHALL NOT EXCEED FIFTY
PERCENT (50%) OF THE TOTAL AMOUNT PAID BY CUSTOMER TO
SPANSION FOR THE DELIVERABLES SOLD IN SUCH CALENDAR YEAR.
5. Should one of the above stipulations be or become invalid and/or unenforceable,
the remaining stipulations shall stay in full effect.
The contents of this document are subject to change by SPANSION without a prior notice,
thus contact SPANSION about the latest one
This board and its deliverables must only be used for
test applications in an evaluation laboratory
environment.

SK-FM3-9BF516N-TOUCHKIT User Guide
Contents
© Spansion Inc. - 5 - MCU-UG-9B0007-11
Contents
REVISION HISTORY............................................................................................................ 2
WARRANTY AND DISCLAIMER ......................................................................................... 3
CONTENTS .......................................................................................................................... 5
1OVERVIEW ...................................................................................................................... 6
1.1 Abstract................................................................................................................... 6
1.2 Features of the ADA-FM3-100PMC-TOUCH-SSBS adapter board.......................... 6
1.3 Features of the SK-FM3-100PMC-MB9BF516N ...................................................... 6
2HARDWARE .................................................................................................................... 7
2.1 Installation ............................................................................................................... 7
3FMTOUCH SOFTWARE .................................................................................................. 9
3.1 CalTool.................................................................................................................... 9
3.2 Other FMtouch packages ........................................................................................ 9
3.3 Further information .................................................................................................. 9
4INFORMATION IN THE WWW....................................................................................... 10
5CHINA-ROHS REGULATION ........................................................................................ 11
6RECYCLING .................................................................................................................. 12

SK-FM3-9BF516N-TOUCHKIT User Guide
Chapter 1 Overview
MCU-UG-9B0007-11 - 6 - © Spansion Inc
1 Overview
1.1 Abstract
The SK-FM3-9BF516N-TOUCHKIT contains an SK-FM3-100PMC-9BF516N Starter Kit and
an ADA-FM3-100PMC-TOUCH-SSBS touch electrode board with four buttons, a scroll
wheel with three elements, and a slider with five elements. In addition, a shield ring driven is
provided, which can be used to decouple the touch electrodes from the surrounding ground
pattern.
1.2 Features of the ADA-FM3-100PMC-TOUCH-SSBS adapter board
Directly connectable to SK-FM3-100PMC or SK-FM3-100PMC-9BF516N Starter Kits
Direct mount or via short ribbon cable
Optional pin headers for ‘free-wire’ connections
Plastic cover
1.3 Features of the SK-FM3-100PMC-MB9BF516N
1x UART-Transceiver (SUB-D9 connector)
1x USB to serial converter (Type-B connector)
1x High-speed CAN-Transceiver (SUB-D9 connector)
1x USB Host / USB Function connector
2x LED display (MODIFIED: 7-Segment SEG1 disconnected to free ADC pins)
2x User-button
1x Reset-button, Reset-LED
All 100 pins routed to pin-header
On-board 5V and 3V voltage regulators, Power-LED
USB power supply (external power supply possible)
For further details about the SK-FM3-100PMC-MB9BF516N Starter Kit, please refer to the
documentation on the accompanying CD.

SK-FM3-9BF516N-TOUCHKIT User Guide
Chapter 2 Hardware
© Spansion Inc. - 7 - MCU-UG-9B0007-11
2 Hardware
2.1 Installation
Remove carefully the board from the shipping box and check for any damages.
Check the content of the box
1x ADA-FM3-100PMC-TOUCH-SSBS
1x SK-FM3-100PMC-MB9BF516N Starter Kit
Modified (RN1 and RN2 removed) and pre-programmed
1x CD / DVD
1x Ribbon Cable
1x USB cable
1x User guide and schematics of the ADA-FM3-100PMC-TOUCH-SSBS
Disconnect the evaluation board from USB and any external power supply.
Attach the adapter board to the evaluation board so that X1 on the bottom side of the
adapter board and X22 on the evaluation board align. Press both boards together.
In case the ribbon cable is used (recommended), connect the female connector (black) to
X22 on the MCU Board, and the male (grey) connector to the adapter board as shown in the
picture below.

SK-FM3-9BF516N-TOUCHKIT User Guide
Chapter 2 Hardware
MCU-UG-9B0007-11 - 8 - © Spansion Inc
NOTE:
On the SK-FM3-100PMC-9BF516N Starter Kit, the 7-segment LED display SEG1 is
connected to the MCU on port pins which are used by the ADA-FM3-TOUCH-SSBS as
touch inputs. In order to make full use of the touch electrodes, the resistor networks RN1
and RN2 were already removed from the starter kit to disconnect SEG1.
Therefore, SEG1 is not operational on the modified Starter Kit contained in this package.
Please refer to the documentation of the evaluation board (on CD) for detailed information
about USB driver installation and jumper settings of the SK-FM3-100PMC-9BF516N. No
special jumper settings on the Starter Kit are required for the ADA-FM3-100PMC-TOUCH-
SSBS.
Connection of the touch electrodes:
Electrode X1 Pin no. X2 Pin no. ADC ch.
Button 1 6 1 AN04
Button 2 7 2 AN05
Button 3 8 3 AN06
Button 4 9 4 AN07
Scroll ch.1 13 5 AN08
Scroll ch.2 14 6 AN09
Scroll ch.3 15 7 AN10
Slider ch.1 16 8 AN11
Slider ch.2 17 9 AN12
Slider ch.3 18 10 AN13
Slider ch.4 19 11 AN14
Slider ch.5 20 12 AN15
Shield rings 5 n/c (X4 Pin 1) (AN03)
Shield hatch 4 n/c (X4 Pin 2) (AN02)

SK-FM3-9BF516N-TOUCHKIT User Guide
Chapter 3 FMtouch software
© Spansion Inc. - 9 - MCU-UG-9B0007-11
3 FMtouch software
3.1 CalTool
CalTool is a graphical PC frontend to monitor and tune touch parameters, such as sensitivity
etc. CalTool can be installed from the CD included in the Starter Kit package, or from the
web page shown below. By default, the communication is done via X5 (USB virtual COM
port). Please refer to the SK-FM3-100PMC-MB9BF516N documentation for details about
jumper settings and driver installation.
3.2 Other FMtouch packages
Ready-to-use FMtouch example projects are available for different hardware setups. These
can be found on the CD included in the Starter Kit package, or downloaded from the
webpage below.
3.3 Further information
Further information about FMtouch can be found in the application note ‘FMx_AN706-00085’
included on the CD in the starter kit package, or the web page below:
http://www.spansion.com/Products/microcontrollers/32-bit-ARM-Core/fm3/pages/touch.aspx

SK-FM3-9BF516N-TOUCHKIT User Guide
Chapter 4 Information in the WWW
MCU-UG-9B0007-11 - 10 - © Spansion Inc
4 Information in the WWW
Information about SPANSION INC Products
can be found on the following Internet pages:
Microcontroller Products
http://www.spansion.com/Products/microcontrollers
Power Management Products
http://www.spansion.com/Products/Analog
Memory Products
http://www.spansion.com/Products/memory
For more information about SPANSION INC.
http://www.spansion.com

SK-FM3-9BF516N-TOUCHKIT User Guide
Chapter 5 China-RoHS regulation
© Spansion Inc. - 11 - MCU-UG-9B0007-11
5 China-RoHS regulation
This board is compliant with China RoHS.

SK-FM3-9BF516N-TOUCHKIT User Guide
Chapter 6 Recycling
MCU-UG-9B0007-11 - 12 - © Spansion Inc
6 Recycling
Gültig für EU-Länder:
Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische
Gesetze nehmen wir dieses Gerät wieder zurück.
Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse:
CCS Express GMBH
c/o Spansion International Inc.
Frankfurter Str. 83-107
D-65479 Raunheim
Germany
Valid for European Union Countries:
According to the European WEEE-Directive and its implementation into national laws we
take this device back.
For disposal please send the device to the following address:
CCS Express GMBH
c/o Spansion International Inc.
Frankfurter Str. 83-107
D-65479 Raunheim
Germany
-- END --